Micro CT Scanner: GE v|tome|x L300 multi-scale nano/microCT system

    Equipment/facility: Equipment

    • Location

      416 Academic Activities Building University Park, PA 16802

      United States

    Equipments Details

    Description

    The GE v|tome|x system is a dual-tube system equipped with a 300kV unipolar microfocus X-ray tube, a 180kV nanofocus X-ray tube with transmission target assembly, and a GE DXR250 high-contrast digital flat panel detector. The high-energy xs|300 d unipolar 300kV, 500W X-ray tube uses a tungsten reflection target system. This X-ray tube allows CT imaging of a range of object sizes and densities at high-resolution with a maximum feature detectability of 1 mm. The xs|300 d unipolar allows for the flexibility of conducting both low energy, high-resolution scanning and higher energy scanning for larger, denser objects.

    The xs|180nf 180kV, 15W nanofocus X-ray tube uses a transmission target system to achieve nanofocus with detail detectabilities in the sub-500 nm range. The xs|180nf also uses a diamond exit window that greatly enhances data quality compared to the more common beryllium windows. The nanofocus tube includes both tungsten and molybdenum target assemblies. Molydenum targets optimize the X-ray spectrum at low acceleration voltages and enhance detectability of low density, soft materials like soft biological tissue. The v|tome|x L 300 uses a high-contrast GE DXR|250|HCD 4 megapixel (2048x2048) digital flat panel detector. This detector is mounted on a track and is automatically translated laterally so that the detector field can be doubled. This so-called “virtual detector” effectively increases the available pixel field to 4096 wide by 2048 high. The increased pixel field allows a much larger projection image to be collected so that maximum resolutions for scanning increase to approximately 1/4000th the diameter of the object being scanned.

    Computed tomography allows for objects to be viewed from multiple directions, thus providing a 3D array of image data. This technique offers non-destructive access to internal structures, composition and processes, where object geometry, density, porosity, component ratios (saturation and composition) and processes can be measured quantitatively.

    Fingerprint Explore the research areas in which this equipment has been used. These labels are generated based on the related outputs. Together they form a unique fingerprint.