• United States

Research Output

Filter
Conference contribution
1999

Computational aeroacoustic analysis of slat trailing-edge flow

Singer, B. A., Lockard, D. P., Brentner, K. S., Khorrami, M. R., Berkman, M. E. & Choudhari, M., Jan 1 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 13-23 11 p. AIAA-99-1802. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

21 Scopus citations

Distributed combustion response function modeling and measurement

Cardiff, E. H. & Micci, M. M., 1999, 35th Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, A 99-2497

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parallel computations of high speed jet noise

Morris, P. J., Long, L. N. & Scheidegge, T., Jan 1 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 99-1873. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Parallel numerical simulation of subsonic cavity noise

Shieh, C. M. & Morris, P. J., Jan 1 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 99-1891. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Scopus citations

Solidification processing of functionally graded materials by sedimentation

Gao, J. W., Stewart, S. W. & Wang, C., Dec 1 1999, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. ASME, p. 289-301 13 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 364-2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Time-domain calculation of sound propagation in lined ducts with sheared flows

Özyörük, Y. & Long, L. N., Jan 1 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 99-1817. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Scopus citations

Unsteady flow computations of a slat with a blunt trailing edge

Khorrami, M. R., Berkman, M. E., Choudhari, M., Singer, B. A., Lockard, D. P. & Brentner, K. S., Jan 1 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-99-1805. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Scopus citations
1998

Determination of optimal row spacing for a staggered cross-pin array in a turbine blade cooling passage

Donahoo, E. E., Kulkarni, A. K., Belegundu, A. D. & Camci, C., Jan 1 1998, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Oscillator fin as a novel heat transfer augmentation device for gas turbine cooling applications

Uzol, O. & Camci, C., Jan 1 1998, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Preliminary investigation of wearable computers for task guidance in aircraft inspection

Ockerman, J. J. & Pritchett, A. R., Jan 1 1998, 2nd International Symposium on Wearable Computers, ISWC 1998. IEEE Computer Society, p. 33-40 8 p. (International Symposium on Wearable Computers, Digest of Papers; vol. 1998-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

47 Scopus citations
1997

Can a coupling coefficient of a piezoelectric device be higher than those of its active material?

Lesieutre, G. A. & Davis, C. L., Dec 1 1997, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 281-292 12 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 3041).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Scopus citations

Finite element for beams having segmented active constrained layers with frequency-dependent viscoelastic material properties

Lesieutre, G. A. & Lee, U., 1997, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, Vol. 3045. p. 315-328 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

New life in dusty decks: Results of porting a CM fortran based aeroacoustic model to high performance fortran

Nucciarone, J. J., Özyörük, Y. & Long, L. N., 1997, Proceedings of the 1997 ACM/IEEE Conference on Supercomputing, SC 1997. Association for Computing Machinery

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Self-oscillating-impinging-jet as a gas turbine cooling enhancement system

Herr, F. & Camci, C., Jan 1 1997, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tunable electrically shunted piezoceramic vibration absorber

Davis, C. L., Lesieutre, G. A. & Dosch, J., Dec 1 1997, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 51-59 9 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 3045).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

58 Scopus citations
1996

Application of thermochromic liquid crystal to rotating surfaces

Camci, C., Glezer, G., Owen, J. M., Pilbrow, R. G. & Syson, B. J., Jan 1 1996, Heat Transfer; Electric Power; Industrial and Cogeneration. Web Portal ASME (American Society of Mechanical Engineers), (ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Embeddable induced strain actuator using a framed 3-3 piezoceramic stack: modeling and characterization

Koopmann, G. H., Lesieutre, G. A., Dershem, B. R., Chen, W. & Yoshikawa, S., 1996, Proceedings of SPIE - The International Society for Optical Engineering. Crowe, C. R. (ed.). Vol. 2721. p. 443-454 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Heat generation of a piezoceramic induced-strain actuator embedded in a glass/epoxy composite panel

Lesieutre, G. A., Fang, L., Koopmann, G. H., Pai, S. P. & Yoshikawa, S., Jan 1 1996, Proceedings of SPIE - The International Society for Optical Engineering. Chopra, I. (ed.). Vol. 2717. p. 267-275 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Passage flow structure and its influence on endwall heat transfer in a 90° turning duct: Turbulent stresses and turbulent kinetic energy production

Wiedner, B. G. & Camci, C., Jan 1 1996, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; General. American Society of Mechanical Engineers, (ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
1995

Color response modification of encapsulated liquid crystals used in rotating disk heat transfer studies

Camci, C. & Glezer, B., Jan 1 1995, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Current status of the microwave arcjet thruster

Sullivan, D. J., Kline, J., Philippe, C. & Micci, M. M., Jan 1 1995, 31st Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-95-3065. (31st Joint Propulsion Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Design of an embedded piezoceramic actuator for active control applications

Koopmann, G. H., Lesieutre, G. A., Yoshikawa, S., Chen, W., Fahnline, J. B., Pai, S. P. & Dershem, B. R., Jan 1 1995, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 703-713 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Inertial piezoceramic actuators for smart structures

Dosch, J. J., Lesieutre, G. A., Koopmann, G. H. & Davis, C. L., Jan 1 1995, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 14-25 12 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2447).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

37 Scopus citations

Shear coaxial injector spray characterization near the LOX post tip region

Glogowski, M. & Micci, M. M., Jan 1 1995, 31st Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 95-2552. (31st Joint Propulsion Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations
1994

Application of a heat flux/calorimeter-based method to assess the effect of turbulence on turbine airfoil heat transfer

Glazer, B., Moon, H. K., Zhang, L. & Camci, C., Jan 1 1994, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1993

Miniature laser Doppler anemometers using solid state laser diodes

McLean, C. & Camci, C., Jan 1 1993, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Society of Photo-Optical Instrumentation Engineers, Vol. 1864. p. 163-179 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Solving the Boltzmann equation at 61 Gigaflops on a 1024-Node CM-5

Long, L. N. & Myczkowski, J., Dec 1 1993, Proceedings of the Supercomputing Conference. Anon (ed.). Publ by IEEE, p. 528-534 7 p. (Proceedings of the Supercomputing Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Technique for the determination of local heat flux on steady state heat transfer surfaces with arbitrarily specified external and internal boundaries

Wiedner, B. G. & Camci, C., 1993, Gas Turbine Heat Transfer-1993. Chow, L. C. & Emery, A. F. (eds.). Publ by ASME, Vol. 242. p. 21-31 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations
1992

Approximate analytic representations for low-thrust trajectories

Stewart, D. J. & Melton, R. G., 1992, Astrodynamics 1991. pt 2 ed. Publ by Univelt Inc, Vol. 76. p. 1455-1467 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Variation of parameters using battin's universal functions

Burton, J. R. & Melton, R. G., Dec 1 1992, Advances in the Astronautical Sciences. pt 1 ed. Publ by Univelt Inc, p. 225-230 6 p. (Advances in the Astronautical Sciences; vol. 79, no. pt 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1991

A new hue capturing technique for the quantitative interpretation of liquid crystal images used in convective heat transfer studies

Camci, C., Kim, K. & Hippensteele, S. A., Jan 1 1991, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Convection heat transfer at the curved bottom surface of a square to rectangular transition duct using a new hue capturing based liquid crystal technique

Camci, C., Kim, K., Hippensteele, S. A. & Poinsatte, P. E., Dec 1 1991, Fundamental Experimental Measurements in Heat Transfer. Publ by ASME, p. 7-22 16 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 179).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Scopus citations

Improved composite material damping using high damping graphite fibers

Lesieutre, G. A., Christiansen, D., Whatley, W. & Yarlagadda, S., 1991, Composite Material Technology - 1991. Hui, D. & Kozik, T. J. (eds.). Publ by ASME, Vol. 37. p. 21-24 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Transfers between circular orbits using fixed impulses

Jin, H. & Melton, R. G., 1991, Advances in the Astronautical Sciences. pt 2 ed. Vol. 75. p. 833-842 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Scopus citations
1990

Effect of incidence on wall heating rates and aerodynamics on a film cooled transonic turbine blade

Camci, C. & Arts, T., Jan 1 1990, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution