• United States

Research Output 1969 2019

Filter
Conference contribution
1999
17 Citations (Scopus)

Unsteady flow computations of a slat with a blunt trailing edge

Khorrami, M. R., Berkman, M. E., Choudhari, M., Singer, B. A., Lockard, D. P. & Brentner, K. S., Jan 1 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-99-1805. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady flow
Acoustics
Vortex shedding
Wind tunnels
NASA
1998
1 Citation (Scopus)

Determination of optimal row spacing for a staggered cross-pin array in a turbine blade cooling passage

Donahoo, E. E., Kulkarni, A. K., Belegundu, A. D. & Camci, C., Jan 1 1998, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Turbines
Heat transfer
Cooling
Reynolds number
3 Citations (Scopus)

Oscillator fin as a novel heat transfer augmentation device for gas turbine cooling applications

Uzol, O. & Camci, C., Jan 1 1998, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fins (heat exchange)
Kinetic energy
Tin
Gas turbines
Aerodynamics
45 Citations (Scopus)

Preliminary investigation of wearable computers for task guidance in aircraft inspection

Ockerman, J. J. & Pritchett, A. R., Jan 1 1998, 2nd International Symposium on Wearable Computers, ISWC 1998. IEEE Computer Society, p. 33-40 8 p. (International Symposium on Wearable Computers, Digest of Papers; vol. 1998-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wearable computers
Inspection
Aircraft
Electronic guidance systems
Aviation
1997
11 Citations (Scopus)

Can a coupling coefficient of a piezoelectric device be higher than those of its active material?

Lesieutre, G. A. & Davis, C. L., Dec 1 1997, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 281-292 12 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 3041).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piezoelectric devices
coupling coefficients
Energy conversion
Buckling
Amplification
6 Citations (Scopus)

Finite element for beams having segmented active constrained layers with frequency-dependent viscoelastic material properties

Lesieutre, G. A. & Lee, U., 1997, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, Vol. 3045. p. 315-328 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials properties
Damping
damping
vibration mode
shape control
1 Citation (Scopus)

New life in dusty decks: Results of porting a CM fortran based aeroacoustic model to high performance fortran

Nucciarone, J. J., Özyörük, Y. & Long, L. N., 1997, Proceedings of the 1997 ACM/IEEE Conference on Supercomputing, SC 1997. Association for Computing Machinery

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Computational aeroacoustics
Turbofan engines
Euler equations
Message passing

Self-oscillating-impinging-jet as a gas turbine cooling enhancement system

Herr, F. & Camci, C., Jan 1 1997, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas turbines
Cooling
Turbomachine blades
Snow and ice removal
Heat transfer
58 Citations (Scopus)

Tunable electrically shunted piezoceramic vibration absorber

Davis, C. L., Lesieutre, G. A. & Dosch, J., Dec 1 1997, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 51-59 9 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 3045).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

absorbers
Actuators
actuators
resonant frequencies
Natural frequencies
1996

Application of thermochromic liquid crystal to rotating surfaces

Camci, C., Glezer, G., Owen, J. M., Pilbrow, R. G. & Syson, B. J., Jan 1 1996, Heat Transfer; Electric Power; Industrial and Cogeneration. Web Portal ASME (American Society of Mechanical Engineers), (ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid crystals
Thermocouples
Temperature
Rotating disks
Image sensors
2 Citations (Scopus)

Embeddable induced strain actuator using a framed 3-3 piezoceramic stack: modeling and characterization

Koopmann, G. H., Lesieutre, G. A., Dershem, B. R., Chen, W. & Yoshikawa, S., 1996, Proceedings of SPIE - The International Society for Optical Engineering. Crowe, C. R. (ed.). Vol. 2721. p. 443-454 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuators
actuators
Fabrication
Electric potential
Compaction
5 Citations (Scopus)

Heat generation of a piezoceramic induced-strain actuator embedded in a glass/epoxy composite panel

Lesieutre, G. A., Fang, L., Koopmann, G. H., Pai, S. P. & Yoshikawa, S., Jan 1 1996, Proceedings of SPIE - The International Society for Optical Engineering. Chopra, I. (ed.). Vol. 2717. p. 267-275 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piezoceramics
heat generation
Epoxy
Heat generation
Actuator
1 Citation (Scopus)

Passage flow structure and its influence on endwall heat transfer in a 90° turning duct: Turbulent stresses and turbulent kinetic energy production

Wiedner, B. G. & Camci, C., Jan 1 1996, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; General. American Society of Mechanical Engineers, (ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Kinetic energy
Ducts
Heat transfer
Flow fields
1995
1 Citation (Scopus)

Color response modification of encapsulated liquid crystals used in rotating disk heat transfer studies

Camci, C. & Glezer, B., Jan 1 1995, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotating disks
Liquid crystals
Heat transfer
Color
Temperature
4 Citations (Scopus)

Current status of the microwave arcjet thruster

Sullivan, D. J., Kline, J., Philippe, C. & Micci, M. M., Jan 1 1995, 31st Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-95-3065. (31st Joint Propulsion Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microwaves
Propellants
High temperature operations
Cavity resonators
Geometry

Design of an embedded piezoceramic actuator for active control applications

Koopmann, G. H., Lesieutre, G. A., Yoshikawa, S., Chen, W., Fahnline, J. B., Pai, S. P. & Dershem, B. R., Jan 1 1995, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 703-713 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

active control
Actuators
actuators
accelerometers
Accelerometers
37 Citations (Scopus)

Inertial piezoceramic actuators for smart structures

Dosch, J. J., Lesieutre, G. A., Koopmann, G. H. & Davis, C. L., Jan 1 1995, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 14-25 12 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2447).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

smart structures
Intelligent structures
Actuators
actuators
fuselages
3 Citations (Scopus)

Shear coaxial injector spray characterization near the LOX post tip region

Glogowski, M. & Micci, M. M., Jan 1 1995, 31st Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 95-2552. (31st Joint Propulsion Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen engines
Oxygen
Rocket engines
Liquids
Stabilization
1994

Application of a heat flux/calorimeter-based method to assess the effect of turbulence on turbine airfoil heat transfer

Glazer, B., Moon, H. K., Zhang, L. & Camci, C., Jan 1 1994, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calorimeters
Airfoils
Heat flux
Turbulence
Turbines
1993
1 Citation (Scopus)

Miniature laser Doppler anemometers using solid state laser diodes

McLean, C. & Camci, C., Jan 1 1993, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Society of Photo-Optical Instrumentation Engineers, Vol. 1864. p. 163-179 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

anemometers
Solid-state Laser
Solid state lasers
Anemometers
Laser Diode
1 Citation (Scopus)

Solving the Boltzmann equation at 61 Gigaflops on a 1024-Node CM-5

Long, L. N. & Myczkowski, J., Dec 1 1993, Proceedings of the Supercomputing Conference. Anon (ed.). Publ by IEEE, p. 528-534 7 p. (Proceedings of the Supercomputing Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boltzmann equation
Shock waves
Conservation
Flow fields
Boundary layers
7 Citations (Scopus)

Technique for the determination of local heat flux on steady state heat transfer surfaces with arbitrarily specified external and internal boundaries

Wiedner, B. G. & Camci, C., 1993, Gas Turbine Heat Transfer-1993. Chow, L. C. & Emery, A. F. (eds.). Publ by ASME, Vol. 242. p. 21-31 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat flux
Heat transfer
Electric heating elements
Ducts
Metal foil
1992
5 Citations (Scopus)

Approximate analytic representations for low-thrust trajectories

Stewart, D. J. & Melton, R. G., 1992, Astrodynamics 1991. pt 2 ed. Publ by Univelt Inc, Vol. 76. p. 1455-1467 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Trajectories

Variation of parameters using battin's universal functions

Burton, J. R. & Melton, R. G., Dec 1 1992, Advances in the Astronautical Sciences. pt 1 ed. Publ by Univelt Inc, p. 225-230 6 p. (Advances in the Astronautical Sciences; vol. 79, no. pt 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orbits
Switches
Trajectories
1991

A new hue capturing technique for the quantitative interpretation of liquid crystal images used in convective heat transfer studies

Camci, C., Kim, K. & Hippensteele, S. A., Jan 1 1991, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid crystals
Heat transfer
Color
Color image processing
Single crystals
9 Citations (Scopus)

Convection heat transfer at the curved bottom surface of a square to rectangular transition duct using a new hue capturing based liquid crystal technique

Camci, C., Kim, K., Hippensteele, S. A. & Poinsatte, P. E., Dec 1 1991, Fundamental Experimental Measurements in Heat Transfer. Publ by ASME, p. 7-22 16 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 179).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid Crystals
Heat convection
Liquid crystals
Ducts
Heat transfer coefficients
1 Citation (Scopus)

Improved composite material damping using high damping graphite fibers

Lesieutre, G. A., Christiansen, D., Whatley, W. & Yarlagadda, S., 1991, Composite Material Technology - 1991. Hui, D. & Kozik, T. J. (eds.). Publ by ASME, Vol. 37. p. 21-24 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphite fibers
graphite
damping
Damping
Composite materials
9 Citations (Scopus)

Transfers between circular orbits using fixed impulses

Jin, H. & Melton, R. G., 1991, Advances in the Astronautical Sciences. pt 2 ed. Vol. 75. p. 833-842 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orbits
1990

Effect of incidence on wall heating rates and aerodynamics on a film cooled transonic turbine blade

Camci, C. & Arts, T., Jan 1 1990, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heating rate
Turbomachine blades
Aerodynamics
Turbines
Cooling