• United States

Research Output 1963 2019

2018
7 Citations (Scopus)
3D printers
Powders
Tomography
Learning systems
Fusion reactions
5 Citations (Scopus)

Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing

Dunbar, A. J. & Nassar, A. R., Jan 2 2018, In : Virtual and Physical Prototyping. 13, 1, p. 14-19 6 p.

Research output: Contribution to journalArticle

3D printers
Process Monitoring
Process monitoring
Powder
Fusion
1 Citation (Scopus)

Atomic layer deposition of PbTiO3 and PbZrxTi1-xO3 films using metal alkyl and alkylamide precursors

Sbrockey, N. M., Tompa, G. S., Lavelle, R., Trumbull, K. A., Fanton, M. A., Snyder, D. W., Polcawich, R. G. & Potrepka, D. M., May 2 2018, In : Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 36, 3, 031509.

Research output: Contribution to journalArticle

Atomic layer deposition
atomic layer epitaxy
metal films
Metals
Zirconium

Bridging the gap: Simultaneous fine tuning for data re-balancing

McKay, J., Gerg, I. D. & Monga, V., Oct 31 2018, 2018 IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 7062-7065 4 p. 8518664. (International Geoscience and Remote Sensing Symposium (IGARSS); vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synthetic aperture sonar
Tuning
Sampling
Neural networks
sonar

Build height control in directed energy deposition using a model-based feed-forward controller

Wang, Q., Li, J., Nassar, A. R., Reutzel, E. W. & Mitchell, W., Jan 1 2018, Control and Optimization of Connected and Automated Ground Vehicles; Dynamic Systems and Control Education; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Energy Systems; Estimation and Identification; Intelligent Transportation and Vehicles; Manufacturing; Mechatronics; Modeling and Control of IC Engines and Aftertreatment Systems; Modeling and Control of IC Engines and Powertrain Systems; Modeling and Management of Power Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 Dynamic Systems and Control Conference, DSCC 2018; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Controllers
Feedback
Lasers
Time measurement
3D printers
1 Citation (Scopus)

Change propagation during prototyping: A case study of a robotic inspection system for dry nuclear waste storage casks

Bracken, J., Brennan, S. N., Lissenden, III, C. J., Simpson, T. W., Van Sant, I., Reichard, K. M. & Ng, M., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design Structure Matrix
Prototyping
Radioactive wastes
Inspection
Robotics

Cluster-based reduced-order modeling to capture intermittent dynamics of interacting wakes

Dare, T. P., Berger, Z. P., Meehan, M. & O'Connor, J. A., Jan 1 2018, AIAA Aerospace Sciences Meeting. 210059 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Aerospace Sciences Meeting, 2018; no. 210059).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Decomposition
Flow interactions
Control surfaces
Vortex shedding
Combustors

Coherent perfect absorption in a weakly absorbing fiber

Jahromi, A. K., Van Newkirk, A. & Abouraddy, A. F., Aug 1 2018, In : IEEE Photonics Journal. 10, 4, 8376000.

Research output: Contribution to journalArticle

Open Access
Fiber lasers
fibers
Fibers
fiber lasers
Fiber amplifiers

Combating behavioral deviance via user behavior control

Qiu, C., Squicciarini, A., Griffin, C. & Umar, P., Jan 1 2018, 17th International Conference on Autonomous Agents and Multiagent Systems, AAMAS 2018. International Foundation for Autonomous Agents and Multiagent Systems (IFAAMAS), p. 202-210 9 p. (Proceedings of the International Joint Conference on Autonomous Agents and Multiagent Systems, AAMAS; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Comparison of Single-Phase and Two-Phase Composite Thermal Barrier Coatings with Equal Total Rare-Earth Content

Rai, A. K., Schmitt, M. P., Dorfman, M. R., Zhu, D. & Wolfe, D. E., Apr 1 2018, In : Journal of Thermal Spray Technology. 27, 4, p. 556-565 10 p.

Research output: Contribution to journalArticle

Thermal barrier coatings
Composite coatings
Rare earths
rare earth elements
coatings
Thermal barrier coatings
Composite coatings
Rare earths
sprayers
rare earth elements
4 Citations (Scopus)
Precipitates
Microstructure
Shape memory effect
Austenite
3D printers

Current readiness for quantum radar implementation

Brandsema, M., Nov 9 2018, 2018 IEEE Conference on Antenna Measurements and Applications, CAMA 2018. Institute of Electrical and Electronics Engineers Inc., 8530617. (2018 IEEE Conference on Antenna Measurements and Applications, CAMA 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

radar
Radar
remote sensing
Remote sensing
Experiments
2 Citations (Scopus)

Design and evaluation of an additively manufactured aircraft heat exchanger

Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jun 25 2018, In : Applied Thermal Engineering. 138, p. 254-263 10 p.

Research output: Contribution to journalArticle

3D printers
Heat exchangers
Aircraft
Geometry
Heat transfer
3 Citations (Scopus)
Fidelity
Modeling
Model
Structural Design
Decision Model

Design considerations for a compact correlation velocity log

Blanford, T. E., Brown, D. & Meyer, Jr., R. J., Jan 1 2018, In : Proceedings of Meetings on Acoustics. 33, 1, 070003.

Research output: Contribution to journalConference article

underwater vehicles
hydrophones
projectors
estimates
shallow water

Design space exploration using uncertainty-based bounding methods in computational fluid dynamics

Valenti, J. D., Miller, S. W., Yukish, M. A. & Kinzel, M. P., Jan 1 2018, 2018 Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 2018-3552

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational fluid dynamics
Fuselages
Fluid dynamics
Drag
Aerodynamics

Dynamic stabilization of the Rayleigh-Bénard instability by acceleration modulation

Swaminathan, A., Garrett, S. L., Poese, M. E. & Smith, R. W., Oct 1 2018, In : Journal of the Acoustical Society of America. 144, 4, p. 2334-2343 10 p.

Research output: Contribution to journalArticle

convection
stabilization
modulation
containers
vibration
2 Citations (Scopus)
Preheating
Lasers
Substrates
Laser cladding
Stress relaxation

Effects of reverberation and noise on the estimation of synthetic aperture sonar multi-look coherence

Lyons, A. P., King, J. L. & Brown, D., Jan 1 2018, 4th International Conference on Synthetic Aperture Sonar and Synthetic Aperture Radar 2018. Institute of Acoustics, p. 91-98 8 p. (Proceedings of the Institute of Acoustics; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

synthetic apertures
sonar
reverberation
2 Citations (Scopus)
Heterojunctions
insulators
engineering
condensed matter physics
symmetry

Extreme value statistics of flow induced noise and vibration

McCluskey, C. J., Conlon, S. C. & Guers, M. J., Jan 1 2018.

Research output: Contribution to conferencePaper

statistics
vibration
methodology
control surfaces
wind turbines

Fabrication and mechanical characterization of nanoporous ceramic composites for potential toughening

Dai, J., Singh, J. & Yamamoto, N., Jan 1 2018, AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials. 210049 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018; no. 210049).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Toughening
Spark plasma sintering
Sintering
Fabrication
Boron carbide
1 Citation (Scopus)

Full-scale reynolds number experiment on interactional aerodynamics between two model rotor hubs and a horizontal stabilizer

Metkowski, L., Reich, D., Sinding, K., Jaffa, N. A. & Schmitz, S., Jan 1 2018, In : Annual Forum Proceedings - AHS International. 2018-May

Research output: Contribution to journalConference article

Horizontal stabilizers
Aerodynamics
Reynolds number
Rotors
Drag
1 Citation (Scopus)

Imaging shallow gas migration pathways in a mud-volcano province using an autonomous underwater vehicle (Malta Plateau, Mediterranean Sea)

Savini, A., Pinson, S., Bistacchi, A., Etiope, G. & Holland, C., Jan 1 2018, In : Near Surface Geophysics. 16, 6, p. 681-699 19 p.

Research output: Contribution to journalArticle

Malta
underwater vehicles
Mediterranean Sea
mud volcano
autonomous underwater vehicle
2 Citations (Scopus)

Impact of compositional gradients on selectivity of dissolvable support structures for directed energy deposited metals

Lefky, C. S., Zucker, B., Nassar, A. R., Simpson, T. W. & Hildreth, O. J., Jul 1 2018, In : Acta Materialia. 153, p. 1-7 7 p.

Research output: Contribution to journalArticle

Stainless Steel
Metals
Stainless steel
Materials properties
Corrosion
3 Citations (Scopus)

Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel

Meredith, S. D., Zuback, J. S., Keist, J. S. & Palmer, T., Dec 19 2018, In : Materials Science and Engineering A. 738, p. 44-56 13 p.

Research output: Contribution to journalArticle

Stainless Steel
stainless steels
grade
heat treatment
Nitrogen
4 Citations (Scopus)
Nickel
Precipitates
Solid solutions
solid solutions
Iron
1 Citation (Scopus)

Integrated plasma facing component calorimetry for measurement of shot integrated deposited energy in the NSTX-U

Gray, T. K., Allen, N., Reinke, M. L., Smalley, G., Youchison, D. L., Ellis, R., Jaworski, M. A., Looby, T., Mardenfeld, M. & Wolfe, D. E., Oct 1 2018, In : Review of Scientific Instruments. 89, 10, 10J128.

Research output: Contribution to journalArticle

Calorimetry
thermocouples
Thermocouples
shot
heat measurement
4 Citations (Scopus)

Layerwise in-process quality monitoring in laser powder bed fusion

Imani, F., Gaikwad, A., Montazeri, M., Rao, P., Yang, H. & Reutzel, E. W., Jan 1 2018, Additive Manufacturing; Bio and Sustainable Manufacturing. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fusion reactions
Powders
Lasers
Monitoring
Porosity

Learning from Multiple Imperfect Instructors in Sensor Networks

Virani, N., Phoha, S. & Ray, A., Oct 1 2018, In : IEEE Transactions on Neural Networks and Learning Systems. 29, 10, p. 5166-5172 7 p., 8278847.

Research output: Contribution to journalArticle

Sensor networks
Sensors
Labels
Classifiers

Loss of lubrication testing

Kozachyn, M., McIntyre, S. M., Robuck, M., Isaacson, A., Black, B. & Sahay, V., Jan 1 2018, In : Annual Forum Proceedings - AHS International. 2018-May

Research output: Contribution to journalConference article

Lubrication
Testing
Screening
Lubricants
Gears

Low-frequency pulsation from a package boiler

Dare, T. P., Beck, B. S., Bonness, W. K., Rufener, S. & Flynn, T., Jan 1 2018.

Research output: Contribution to conferencePaper

boilers
low frequencies
ducts
transducers
acoustic properties

Material influence on GHz split-ring resonator plasma ignition performance

Cohick, Z., Perini, S. E., Wolfe, D. E. & Lanagan, M. T., Oct 21 2018, In : Journal of Applied Physics. 124, 15, 153302.

Research output: Contribution to journalArticle

ignition
resonators
plasma generators
rings
silver

Measurements of two-dimensional spatial coherence of normal-incidence seafloor scattering

Brown, D., Brownstead, C. F., Lyons, A. P. & Gabrielson, T. B., Oct 1 2018, In : Journal of the Acoustical Society of America. 144, 4, p. 2095-2108 14 p.

Research output: Contribution to journalArticle

incidence
scattering
sediments
spatial isotropy
lakes

Measuring human assessed complexity in synthetic aperture sonar imagery using the elo rating system

Reinhardt, B. T., Gerg, I. D., Brown, D. & Park, J. D., Jan 1 2018, 4th International Conference on Synthetic Aperture Sonar and Synthetic Aperture Radar 2018. Institute of Acoustics, p. 227-234 8 p. (Proceedings of the Institute of Acoustics; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

synthetic apertures
sonar
ratings
imagery

Metamaterial characterization for acoustic cloaking applications

Hanford, A. D., Kerrian, P., Beck, B. S. & Capone, D., Jan 1 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). KU Leuven - Departement Werktuigkunde, p. 3097-3109 13 p. (Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metamaterials
Acoustics
acoustics
bulk modulus
foams
3 Citations (Scopus)

Microtexture in additively manufactured Ti-6Al-4V fabricated using directed energy deposition

Waryoba, D. R., Keist, J. S., Ranger, C. & Palmer, T., Sep 12 2018, In : Materials Science and Engineering A. 734, p. 149-163 15 p.

Research output: Contribution to journalArticle

Electron beams
electron beams
Texturing
Laser beams
energy

Modeling and measurement of a tunable acoustoelastic system

Fowler, D., Lopp, G., Bansal, D., Schultz, R., Brake, M. & Shepherd, M. R., Jun 1 2018, Sound and Vibration, 52, 3, p. 12-17 6 p.

Research output: Contribution to specialist publicationArticle

Acoustics
acoustics
material absorption
Dynamic response
cavities
Turbulent Flow
turbulent flow
Turbulent flow
Fluxes
Modeling
15 Citations (Scopus)
3D printers
Defects
Fusion reactions
Powders
Process monitoring

Multi-functional nano-porous ceramics

Yamamoto, N., Singh, J. & Dai, J., Jan 1 2018, 33rd Technical Conference of the American Society for Composites 2018. DEStech Publications Inc., p. 1958-1964 7 p. (33rd Technical Conference of the American Society for Composites 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Toughening
Metals
Thermodynamic stability
Porosity
Crystal whiskers
2 Citations (Scopus)

Multiplane particle shadow velocimetry to quantify integral length scales

Truong, C., Hinkle, S. S., Harris, J. R., Krane, M. H., Sinding, K. M., Jefferies, R. W., Camp, T. A. & Fontaine, A. A., Apr 1 2018, In : Experiments in Fluids. 59, 4, 73.

Research output: Contribution to journalArticle

Velocity measurement
particle image velocimetry
field of view
tunnels
confidence
6 Citations (Scopus)
Defects
Sensors
Powders
Tomography
3D printers
3 Citations (Scopus)

Nanotwinning and amorphization of boron suboxide

Kunka, C., An, Q., Rudawski, N., Subhash, G., Zheng, J., Halls, V. & Singh, J., Apr 1 2018, In : Acta Materialia. 147, p. 195-202 8 p.

Research output: Contribution to journalArticle

Boron
Amorphization
Transmission electron microscopy
Mechanical drives
Boron carbide
1 Citation (Scopus)
forecasting
alphabets
Time series
Probability distributions
autoregressive moving average

Noise transmission from a small, hermetic, reciprocating compressor

Cunsolo, J. V., Brungart, T. A. & Hambric, S. A., Jan 1 2018.

Research output: Contribution to conferencePaper

compressors
acoustics
refrigerants
ear
enclosure

Nonbrittle nanopore deformation of anodic aluminum oxide membranes

Dai, J., Singh, J. & Yamamoto, N., May 1 2018, In : Journal of the American Ceramic Society. 101, 5, p. 2170-2180 11 p.

Research output: Contribution to journalArticle

Nanopores
Aluminum Oxide
Membranes
Aluminum
Oxides

Nuclear storage cask inspection robotics as a case study in system design challenges

Bracken, J., Brennan, S. N., Van Sant, I., Lissenden, III, C. J. & Reichard, K. M., Jan 1 2018, Design, Reliability, Safety, and Risk. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Inspection
Systems analysis
Spent fuels
Nuclear fuels
Lubrication
Gears
Friction
Lubricants
Oils