Applied Research Laboratory (ARL)

  • United States

Research Output 1963 2019

Filter
Conference contribution
2019

Acoustic excitation of a flanged joint

Jerome, T. W., Shepherd, M. R. & Hambric, S. A., Jan 1 2019, Nonlinear Dynamics - Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. Kerschen, G. (ed.). Springer New York LLC, Vol. 1. p. 211-224 14 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Flanges
Acoustics
Rivets
Hammers
Bolts
3 Citations (Scopus)

An investigation of the behavior of a coaxial rotor in descent and ground effect

Kinzel, M. P., Cornelius, J. K., Schmitz, S., Palacios, J., Langelaan, J. W., Adams, D. S. & Lorenz, R. D., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Ground effect
Rotors
Unmanned aerial vehicles (UAV)
Vortex flow
Aerodynamics

Characterizing length scales in the near wake of a circular cylinder using particle shadow velocimetry

Hinkle, S. S. & Jefferies, R. W., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Circular cylinders
Velocity measurement
Experiments
Pressure measurement
Reynolds number
1 Citation (Scopus)

Design, fabrication and preliminary testing of an experimental measurement rig for co-axial rotors

Yan, S., Getz, D. V., Palacios, J., Kinzel, M. P., Schmitz, S. & Langelaan, J. W., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Rotors
Fabrication
Torque
Testing
Vortex flow

Efficient CFD approaches for coaxial rotor simulations

Cornelius, J. K., Kinzel, M. P. & Schmitz, S., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Computational fluid dynamics
Rotors
Aircraft
Commercial vehicles
Benchmarking

Evaluation of bolt torque levels using nonlinear wave modulation spectroscopy

Neblett, C. L., Guers, M. J. & Capone, D., May 8 2019, 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38. Laflamme, S., Holland, S. & Bond, L. J. (eds.). American Institute of Physics Inc., 020032. (AIP Conference Proceedings; vol. 2102).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access
bolts
nonlinear wave
torque
bolt
spectroscopy

Experimental Demonstration of a Tunable Acoustoelastic System

Fowler, D., Lopp, G., Bansal, D., Schultz, R., Brake, M. & Shepherd, M. R., Jan 1 2019, Rotating Machinery, Vibro-Acoustics and Laser Vibrometry, Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. Di Maio, D. (ed.). Springer New York LLC, p. 179-189 11 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Demonstrations
Acoustics
Dynamic response
1 Citation (Scopus)

Field assisted sintering of nanoporous boron carbide with hierarchical microstructure

Dai, J., Singh, J. & Yamamoto, N., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Boron carbide
Spark plasma sintering
Microstructure
Toughening
Sintering

Field-Assisted Sintering of Nickel-Based Superalloy Powder for High-Temperature Hybrid Turbine Disc Applications

Lin, C. I., Niuman, S., Yamamoto, N., Kulkarni, A. K. & Singh, J., Jan 1 2019, 10th International Symposium on High-Temperature Metallurgical Processing, 2019. Padilla, R., Yücel, O., Gregurek, D., Jiang, T., Peng, Z., Zhao, B., Downey, J. P., Keskinkilic, E. & Hwang, J-Y. (eds.). Springer International Publishing, p. 175-187 13 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Spark plasma sintering
Nickel
Superalloys
Joining
Powders

Multi-functional nano-porous ceramics

Yamamoto, N., Singh, J. & Dai, J., Jan 1 2019, SAMPE Conference and Exhibition. Ahlstrom, K., Biermann, P. J., Knight, M. J., Becnel, A. C., Harris, J., Scarborough, S. E., Sears, P., Gardner, B., Thostenson, E. T., Buchholz, M., Reyes-Villanueva, G., Anderson, J. P., Beckwith, S., Cates, E. & Thomas, J. (eds.). Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fracture toughness
Microstructure
Hardness
Stiffness
Boron carbide

Numerical Modeling of an Enclosed Cylinder

Schultz, R. & Shepherd, M. R., Jan 1 2019, Rotating Machinery, Vibro-Acoustics and Laser Vibrometry, Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. Di Maio, D. (ed.). Springer New York LLC, p. 191-197 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fluids
Analytical models
Boundary conditions
Hardware

Properties for AA7050 deposits produced by the cold spray process

Eden, T. J., Judd, K. G. & Girrior, R. M., Jan 1 2019, SAMPE Conference and Exhibition. Ahlstrom, K., Biermann, P. J., Knight, M. J., Becnel, A. C., Harris, J., Scarborough, S. E., Sears, P., Gardner, B., Thostenson, E. T., Buchholz, M., Reyes-Villanueva, G., Anderson, J. P., Beckwith, S., Cates, E. & Thomas, J. (eds.). Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Powders
Deposits
Spray nozzles
Helium
Gases

SAS Simulations with Procedural Texture and the Point-based Sonar Scattering Model

Johnson, S. F. & Brown, D., Jan 7 2019, OCEANS 2018 MTS/IEEE Charleston, OCEAN 2018. Institute of Electrical and Electronics Engineers Inc., 8604616. (OCEANS 2018 MTS/IEEE Charleston, OCEAN 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Sonar
sonar
Time series
Textures
texture

Sediment volume search sonar

Blanford, T. E., Brown, D., Johnson, S. F. & Brownstead, C. F., Jan 1 2019, 24th European Meeting of Environmental and Engineering Geophysics. European Association of Geoscientists and Engineers, EAGE, (24th European Meeting of Environmental and Engineering Geophysics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Sonar
sonar
Sediments
sensor
Sensors

Stochastic estimation using modern methods in machine learning

Tenney, A. S., Glauser, M. N. & Berger, Z. P., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Learning systems
Pressure transducers
Pressure measurement
Network architecture
Mean square error

The effect of immersion time on the electrochemical characterization of additively manufactured 316L stainless steel exposed to artificial seawater

Shaw, B., Sikora, E., Wang, D., Palmer, T. & Kadhi, M. S. A., Jan 1 2019, Materials Science and Technology 2018, MS and T 2018. Association for Iron and Steel Technology, AISTECH, p. 721-728 8 p. (Materials Science and Technology 2018, MS and T 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3D printers
Stainless Steel
Seawater
Pitting
Stainless steel
2018

A data-driven framework for deploying solar PV at Penn State University

Hoskins, M., Miller, S. W. & Prinkey, M., Jan 1 2018, SOLAR 2018 - 47th National Solar Conference of the American Solar Energy Society. Middleton, P. & Cliburn, J. (eds.). American Solar Energy Society, p. 23-31 9 p. (SOLAR 2018 - 47th National Solar Conference of the American Solar Energy Society).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Site selection
Gas emissions
Greenhouse gases
Decision making
Economics

Additional representations for improving synthetic aperture sonar classification using con-volutional neural networks

Gerg, I. D. & Williams, D. P., Jan 1 2018, 4th International Conference on Synthetic Aperture Sonar and Synthetic Aperture Radar 2018. Institute of Acoustics, p. 11-22 12 p. (Proceedings of the Institute of Acoustics; vol. 40).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

synthetic apertures
sonar

Analysis of fluid insert noise reduction method with PIV

Morgan, J., Shoemaker, C., McLaughlin, D. K., Morris, P. J. & Berger, Z. P., Jan 1 2018, 2018 AIAA/CEAS Aeroacoustics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 2018-3610. (2018 AIAA/CEAS Aeroacoustics Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Die casting inserts
Noise abatement
Velocity measurement
Flow fields
Fluids

A physics-based virtual environment for enhancing the quality of deep generative designs

Dering, M., Cunningham, J., Desai, R., Simpson, T. W., Yukish, M. A. & Tucker, C. S., Jan 1 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Virtual Environments
Virtual reality
Physics
Labeling
Generative Models

Bridging the gap: Simultaneous fine tuning for data re-balancing

McKay, J., Gerg, I. D. & Monga, V., Oct 31 2018, 2018 IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 7062-7065 4 p. 8518664. (International Geoscience and Remote Sensing Symposium (IGARSS); vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Synthetic aperture sonar
Tuning
Sampling
Neural networks
sonar

Build height control in directed energy deposition using a model-based feed-forward controller

Wang, Q., Li, J., Nassar, A. R., Reutzel, E. W. & Mitchell, W., Jan 1 2018, Control and Optimization of Connected and Automated Ground Vehicles; Dynamic Systems and Control Education; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Energy Systems; Estimation and Identification; Intelligent Transportation and Vehicles; Manufacturing; Mechatronics; Modeling and Control of IC Engines and Aftertreatment Systems; Modeling and Control of IC Engines and Powertrain Systems; Modeling and Management of Power Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 Dynamic Systems and Control Conference, DSCC 2018; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Controllers
Feedback
Lasers
Time measurement
3D printers
1 Citation (Scopus)

Change propagation during prototyping: A case study of a robotic inspection system for dry nuclear waste storage casks

Bracken, J., Brennan, S. N., Lissenden, III, C. J., Simpson, T. W., Van Sant, I., Reichard, K. M. & Ng, M., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Design Structure Matrix
Prototyping
Radioactive wastes
Inspection
Robotics

Cluster-based reduced-order modeling to capture intermittent dynamics of interacting wakes

Dare, T. P., Berger, Z. P., Meehan, M. & O'Connor, J. A., Jan 1 2018, AIAA Aerospace Sciences Meeting. 210059 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Aerospace Sciences Meeting, 2018; no. 210059).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Decomposition
Flow interactions
Control surfaces
Vortex shedding
Combustors

Combating behavioral deviance via user behavior control

Qiu, C., Squicciarini, A., Griffin, C. & Umar, P., Jan 1 2018, 17th International Conference on Autonomous Agents and Multiagent Systems, AAMAS 2018. International Foundation for Autonomous Agents and Multiagent Systems (IFAAMAS), p. 202-210 9 p. (Proceedings of the International Joint Conference on Autonomous Agents and Multiagent Systems, AAMAS; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Current readiness for quantum radar implementation

Brandsema, M., Nov 9 2018, 2018 IEEE Conference on Antenna Measurements and Applications, CAMA 2018. Institute of Electrical and Electronics Engineers Inc., 8530617. (2018 IEEE Conference on Antenna Measurements and Applications, CAMA 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

radar
Radar
remote sensing
Remote sensing
Experiments

Design space exploration using uncertainty-based bounding methods in computational fluid dynamics

Valenti, J. D., Miller, S. W., Yukish, M. A. & Kinzel, M. P., Jan 1 2018, 2018 Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 2018-3552. (2018 Fluid Dynamics Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Computational fluid dynamics
Fuselages
Fluid dynamics
Drag
Aerodynamics

Effects of reverberation and noise on the estimation of synthetic aperture sonar multi-look coherence

Lyons, A. P., King, J. L. & Brown, D., Jan 1 2018, 4th International Conference on Synthetic Aperture Sonar and Synthetic Aperture Radar 2018. Institute of Acoustics, p. 91-98 8 p. (Proceedings of the Institute of Acoustics; vol. 40).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

synthetic apertures
sonar
reverberation

Fabrication and mechanical characterization of nanoporous ceramic composites for potential toughening

Dai, J., Singh, J. & Yamamoto, N., Jan 1 2018, AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials. 210049 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018; no. 210049).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Toughening
Spark plasma sintering
Sintering
Fabrication
Boron carbide
5 Citations (Scopus)

Layerwise in-process quality monitoring in laser powder bed fusion

Imani, F., Gaikwad, A., Montazeri, M., Rao, P., Yang, H. & Reutzel, E. W., Jan 1 2018, Additive Manufacturing; Bio and Sustainable Manufacturing. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fusion reactions
Powders
Lasers
Monitoring
Porosity

Measuring human assessed complexity in synthetic aperture sonar imagery using the elo rating system

Reinhardt, B. T., Gerg, I. D., Brown, D. & Park, J. D., Jan 1 2018, 4th International Conference on Synthetic Aperture Sonar and Synthetic Aperture Radar 2018. Institute of Acoustics, p. 227-234 8 p. (Proceedings of the Institute of Acoustics; vol. 40).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

synthetic apertures
sonar
ratings
imagery

Metamaterial characterization for acoustic cloaking applications

Hanford, A. D., Kerrian, P., Beck, B. S. & Capone, D., Jan 1 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). KU Leuven - Departement Werktuigkunde, p. 3097-3109 13 p. (Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Metamaterials
Acoustics
acoustics
bulk modulus
foams

Multi-functional nano-porous ceramics

Yamamoto, N., Singh, J. & Dai, J., Jan 1 2018, 33rd Technical Conference of the American Society for Composites 2018. DEStech Publications Inc., p. 1958-1964 7 p. (33rd Technical Conference of the American Society for Composites 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Toughening
Metals
Thermodynamic stability
Porosity
Crystal whiskers

Nuclear storage cask inspection robotics as a case study in system design challenges

Bracken, J., Brennan, S. N., Van Sant, I., Lissenden, III, C. J. & Reichard, K. M., Jan 1 2018, Design, Reliability, Safety, and Risk. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 13).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Robotics
Inspection
Systems analysis
Spent fuels
Nuclear fuels
1 Citation (Scopus)

Reliability centered additive manufacturing computational design framework

Harris, P., Laskowski, B., Reutzel, E. W., Earthman, J. C. & Hess, A. J., Jun 25 2018, 2018 IEEE Aerospace Conference, AERO 2018. IEEE Computer Society, p. 1-10 10 p. (IEEE Aerospace Conference Proceedings; vol. 2018-March).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3D printers
manufacturing
defect
corrosion
Defects

Signal processing methods for in-situ creep specimen monitoring

Guers, M. J. & Tittmann, B. R., Apr 20 2018, 44th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 37. American Institute of Physics Inc., Vol. 1949. 100005

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

signal processing
group velocity
envelopes
velocity measurement
phase velocity

Spanwise velocity correlations along a circular cylinder using particle shadow velocimetry

Hinkle, S. S., Jefferies, R. W., Truong, C., Harris, J. R. & McPhail, M. J., Jan 1 2018, AIAA Aerospace Sciences Meeting. 210059 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Aerospace Sciences Meeting, 2018; no. 210059).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Circular cylinders
Velocity measurement
Turbulent flow
Light emitting diodes
Reynolds number

Stereoscopic particle shadow velocimetry

Harris, J. R., McPhail, M. J., Truong, C. & Fontaine, A. A., Jan 1 2018, Fluids Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Velocity measurement
Flow fields
Lasers
Light emitting diodes
Cameras
1 Citation (Scopus)

The effect of out-of-plane shear within the depth of correlation in macroscopic planar particle shadow velocimetry

Truong, C., Harris, J. R. & McPhail, M. J., Jan 1 2018, AIAA Aerospace Sciences Meeting. 210059 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Aerospace Sciences Meeting, 2018; no. 210059).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Velocity measurement
Imaging systems
Light emitting diodes
Light sources
Lighting

Wing camber variation of an autonomous underwater glider

Angilella, A. J., Gandhi, F. S. & Lear, M. H., Jan 1 2018, AIAA/AHS Adaptive Structures. 209979 ed. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA/AHS Adaptive Structures Conference, 2018; no. 209979).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Gliders
Cambers
Shape memory effect
Durability
Finite element method
2017

Advances and applications in comprehensive Gearbox Aero-thermodynamics and tribology simulation

McIntyre, S. M. & Kunz, R. F., Jan 1 2017, 73rd American Helicopter Society International Annual Forum Special Sessions 2017. American Helicopter Society, Vol. 2017-May. p. 242-261 20 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Tribology
Thermodynamics
Lubrication
Computational fluid dynamics
Multiphase flow

A flow regime map for gas jets

Fronzeo, M. A., Kinzel, M. P. & Lindau, J. W. V., Jan 1 2017, Symposia: Gas-Liquid Two-Phase Flows; Gas and Liquid-Solid Two-Phase Flows; Numerical Methods for Multiphase Flow; Turbulent Flows: Issues and Perspectives; Flow Applications in Aerospace; Fluid Power; Bio-Inspired Fluid Mechanics; Flow Manipulation and Active Control; Fundamental Issues and Perspectives in Fluid Mechanics; Transport Phenomena in Energy Conversion from Clean and Sustainable Resources; Transport Phenomena in Materials Processing and Manufacturing Processes. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1C-2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Gases
Liquids
Flow structure
Computational fluid dynamics
Flow rate
3 Citations (Scopus)

A higher-order free-wake method for propeller-wing systems

Cole, J. A., Maughmer, M. D., Bramesfeld, G. & Kinzel, M. P., Jan 1 2017, 35th AIAA Applied Aerodynamics Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Propellers
Flow fields
Conceptual design
Vorticity
Propulsion
1 Citation (Scopus)

An improved CFD approach for ice-accretion prediction using the discrete element roughness method

Hanson, D. & Kinzel, M. P., Jan 1 2017, Symposia: Gas-Liquid Two-Phase Flows; Gas and Liquid-Solid Two-Phase Flows; Numerical Methods for Multiphase Flow; Turbulent Flows: Issues and Perspectives; Flow Applications in Aerospace; Fluid Power; Bio-Inspired Fluid Mechanics; Flow Manipulation and Active Control; Fundamental Issues and Perspectives in Fluid Mechanics; Transport Phenomena in Energy Conversion from Clean and Sustainable Resources; Transport Phenomena in Materials Processing and Manufacturing Processes. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1C-2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Ice
Computational fluid dynamics
Surface roughness
Glazes
Heat transfer

Anti-resonant hollow core fiber for precision timing applications

Van Newkirk, A., Antonio Lopez, J. E., Amezcua Correa, R., Schülzgen, A. & Mazurowski, J., Jan 1 2017, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications XI. Yin, S. & Guo, R. (eds.). SPIE, 103820E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10382).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Timing
hollow
time measurement
Fiber
fibers

Anti-resonant hollow core fiber for precision timing applications

Van Newkirk, A., Antonio Lopez, J. E., Amezcua Correa, R., Schülzgen, A. & Mazurowski, J., Sep 7 2017, Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems. Hull, T. B., Hallibert, P. & Kim, D. W. (eds.). SPIE, 104010F. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10401).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Timing
hollow
time measurement
Fiber
fibers
3 Citations (Scopus)

Antiresonant hollow core fiber with seven nested capillaries

Antonio-Lopez, J. E., Habib, S., Van Newkirk, A., Lopez-Galmiche, G., Eznaveh, Z. S., Alvarado-Zacarias, J. C., Bang, O., Bache, M., Schulzgen, A. & Correa, R. A., Jan 23 2017, 2016 IEEE Photonics Conference, IPC 2016. Institute of Electrical and Electronics Engineers Inc., p. 402-403 2 p. 7831157. (2016 IEEE Photonics Conference, IPC 2016).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

hollow
fibers
Fibers
Bandwidth
tubes
2 Citations (Scopus)

A practical application of an unsteady formulation of the Kutta-Joukowski theorem

Cole, J. A., Maughmer, M. D., Bramesfeld, G. & Kinzel, M. P., Jan 1 2017, 35th AIAA Applied Aerodynamics Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Potential flow
Propellers
Airfoils

Artificially ventilated cavities: Evaluating the constant-pressure approximation

Fronzeo, M. A., Kinzel, M. P. & Lindau, J. W. V., Jan 1 2017, Symposia: Fluid Measurement and Instrumentation; Fluid Dynamics of Wind Energy; Renewable and Sustainable Energy Conversion; Energy and Process Engineering; Microfluidics and Nanofluidics; Development and Applications in Computational Fluid Dynamics; DNS/LES and Hybrid RANS/LES Methods. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B-2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Probability density function
Computational fluid dynamics
Vortex flow
1 Citation (Scopus)

A unified homogenous multiphase CFD model for cavitation

Kinzel, M. P., Lindau, J. W. V. & Kunz, R. F., 2017, Symposia: Fluid Measurement and Instrumentation; Fluid Dynamics of Wind Energy; Renewable and Sustainable Energy Conversion; Energy and Process Engineering; Microfluidics and Nanofluidics; Development and Applications in Computational Fluid Dynamics; DNS/LES and Hybrid RANS/LES Methods. American Society of Mechanical Engineers (ASME), Vol. 1B-2017.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Cavitation
Computational fluid dynamics
Bubbles (in fluids)