• United States

Research Output 1963 2019

Filter
Conference contribution
2017
1 Citation (Scopus)

Development of an analytical model for beams with two dimples in opposing direction

Ghazwani, M., Myers, K. R. & Naghshineh, K., Jan 1 2017, Acoustics, Vibration and Phononics. American Society of Mechanical Engineers (ASME), Vol. 13.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analytical models
Natural frequencies
Differential equations
Finite element method
Strain energy

Dynamically reconfigurable AES cryptographic core for small, power limited mobile sensors

Rasheed, A., Cotter, M., Smith, B., Levan, D. & Phoha, S., Jan 17 2017, 2016 IEEE 35th International Performance Computing and Communications Conference, IPCCC 2016. Institute of Electrical and Electronics Engineers Inc., 7820667. (2016 IEEE 35th International Performance Computing and Communications Conference, IPCCC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cryptography
Throughput
Hardware
Controllers
Sensors
5 Citations (Scopus)

Electric and magnetic target polarization in quantum radar

Brandsema, M., Narayanan, R. M. & Lanzagorta, M., Jan 1 2017, Radar Sensor Technology XXI. Doerry, A. & Ranney, K. I. (eds.). SPIE, Vol. 10188. 101880C

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Radar
radar
Radar cross section
Polarization
Radar Cross Section

Employing multidimensional data visualization tools to assess the impact of constraint uncertainties on complex design problems

Stump, G. M., Miller, S. W., Yukish, M. A. & Farrell, C. M., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Data visualization
Multidimensional Data
Data Visualization
Uncertainty
Budget Constraint

Estimating material wavespeed using the wavenumber transform of rectangular plate mode shapes

Shepherd, M. R., Jan 1 2017, Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics and Laser Vibrometry - Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics. Springer New York LLC, Vol. 8B. p. 41-46 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hammers
Modal analysis
Frequency response
Natural frequencies
Damping

Experimental comparison of a traditionally built versus additively manufactured aircraft heat exchanger

Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jan 1 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0902

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat exchangers
Aircraft
Pressure drop
Geometry
Heat transfer

Fiber optic sensors based on strongly coupled multicore fiber

Schülzgen, A., Van Newkirk, A., Antonio-Lopez, J. E., Correa, R. A., Zubia, J. & Villatoro, J., Jan 1 2017, Advanced Photonics, Sensors 2017. OSA - The Optical Society, (Optics InfoBase Conference Papers; vol. Part F58-Sensors 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fiber optic sensors
Fibers
Temperature

In-situ creep specimen monitoring: A comparison of guided wave and local transducer techniques

Guers, M. J. & Tittmann, B. R., Feb 16 2017, 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 36. Bond, L. J. & Chimenti, D. E. (eds.). American Institute of Physics Inc., 050004. (AIP Conference Proceedings; vol. 1806).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

transducers
in situ measurement
ultrasonics
reactors
wire
2 Citations (Scopus)

Invited Paper: A model of paradoxical privacy behavior in users and online sites

Griffin, C., Rajtmajer, S. & Squicciarini, A., Jan 6 2017, Proceedings - 2016 IEEE 2nd International Conference on Collaboration and Internet Computing, IEEE CIC 2016. Institute of Electrical and Electronics Engineers Inc., p. 206-211 6 p. 7809708

Research output: Chapter in Book/Report/Conference proceedingConference contribution

privacy
social network
costs
interaction
resources
2 Citations (Scopus)

Little data, big stories: Taking the pulse of large-scaled events on twitter

Dudas, P. M., Weirman, S. & Griffin, C., Jan 6 2017, Proceedings - 2016 IEEE 2nd International Conference on Collaboration and Internet Computing, IEEE CIC 2016. Institute of Electrical and Electronics Engineers Inc., p. 474-482 9 p. 7809742

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Social sciences
twitter
Electric network analysis
Bombing
event
1 Citation (Scopus)

Model prediction for deposition height during a direct metal deposition process

Li, J., Wang, Q., Michaleris, P. & Reutzel, E. W., Jun 29 2017, 2017 American Control Conference, ACC 2017. Institute of Electrical and Electronics Engineers Inc., p. 2188-2194 7 p. 7963277

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metals
Lasers
3D printers
Geometry
Real time control

Naval applications of marine acoustics

Bradley, D., Jan 1 2017, Proceedings of ACOUSTICS 2017 Perth: Sound, Science and Society - 2017 Annual Conference of the Australian Acoustical Society, AAS 2017. McMinn, T. & Duncan, A. (eds.). Australian Acoustical Society, (Proceedings of ACOUSTICS 2017 Perth: Sound, Science and Society - 2017 Annual Conference of the Australian Acoustical Society, AAS 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

requirements
acoustics
resources
navy
sonar

Optimal discovery of ambient acoustic noise field

Bogdan, C. C., Wixom, A. S., McDaniel, J. G. & Andersson, S. B., Jun 29 2017, 2017 American Control Conference, ACC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3329-3334 6 p. 7963461. (Proceedings of the American Control Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustic noise
Maximum principle
Differential equations
Acoustics
Decomposition
1 Citation (Scopus)

Probabilistic forecasting of symbol sequences with deep neural networks

Hauser, M., Fu, Y., Li, Y., Phoha, S. & Ray, A., Jun 29 2017, 2017 American Control Conference, ACC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3147-3152 6 p. 7963431

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Time series
Combustors
Deep neural networks
Entropy
Statistics

Radiated sound from a cross-flow turbine with pitching hydrofoils

Jonson, M. L., Jefferies, R. W., Goldschmidt, M. Z. & McEntee, J., Jan 1 2017, Acoustics, Vibration and Phononics. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrofoils
Turbines
Acoustic waves
Hydrophones
Mammals
2 Citations (Scopus)

Sequential design of UAV fuselage pods using bounding aerodynamic models

Valenti, J. D., Kinzel, M. P. & Miller, S. W., Jan 1 2017, Symposia: Gas-Liquid Two-Phase Flows; Gas and Liquid-Solid Two-Phase Flows; Numerical Methods for Multiphase Flow; Turbulent Flows: Issues and Perspectives; Flow Applications in Aerospace; Fluid Power; Bio-Inspired Fluid Mechanics; Flow Manipulation and Active Control; Fundamental Issues and Perspectives in Fluid Mechanics; Transport Phenomena in Energy Conversion from Clean and Sustainable Resources; Transport Phenomena in Materials Processing and Manufacturing Processes. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuselages
Unmanned aerial vehicles (UAV)
Aerodynamics
Computational fluid dynamics
Drag
2 Citations (Scopus)

Theoretical considerations for a dynamic calibration target for through-wall and through-rubble motion-sensing Doppler radar

Harner, M. J., Brandsema, M., Narayanan, R. M., Jendzurski, J. R. & Paulter, N. G., Jan 1 2017, Radar Sensor Technology XXI. Doerry, A. & Ranney, K. I. (eds.). SPIE, Vol. 10188. 101880A

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Doppler radar
Doppler
Radar
Calibration
Sensing
1 Citation (Scopus)

The use of lithium fuel with planetary in situ oxidizers

Baker, T. M., Miller, T. F., Paul, M. V. & Peters, J. A., Jan 1 2017, 10th Symposium on Space Resource Utilization, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

oxidizers
lithium
Lithium
energy sources
primary batteries

Toward single-mode UV to near-IR guidance using hollow-core antiresonant silica fiber

Selim Habib, M. D., Antonio-Lopez, J. E., Van Newkirk, A., Zacarias, J. C. A., Schu¨lzgen, A., Amezuca-Correa, R., Markos, C., Bang, O. & Bache, M., Jan 1 2017, The European Conference on Lasers and Electro-Optics, CLEO_Europe 2017. OSA - The Optical Society, (Optics InfoBase Conference Papers; vol. Part F82-CLEO_Europe 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon Dioxide
Silica
Fibers
2 Citations (Scopus)

Two applications of design as a sequential decision process

Miller, S. W., Simpson, T. W. & Yukish, M. A., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fidelity
Bilevel Optimization
Lower Solution
Finite Element Modeling
Systems Engineering
1 Citation (Scopus)

Validation of PSV for turbulence measurements and modeling

Harris, J. R., Berger, Z. P., Truong, C. & Hinkle, S., Jan 1 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0253. (AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Velocity measurement
Turbulence
Flow fields
Pressure transducers
Lasers
1 Citation (Scopus)

Vibration amplitude and fastener torque dependence of damping in a jointed structure

Jerome, T. W., Hambric, S. A. & Shepherd, M. R., Jan 1 2017, 29th Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fasteners
Vibrations (mechanical)
Torque
Damping
Vibration
2 Citations (Scopus)

What's mine is yours: Pretrained CNNs for limited training sonar ATR

McKay, J., Gerg, I. D., Monga, V. & Raj, R. G., Dec 19 2017, OCEANS 2017 � Anchorage. Institute of Electrical and Electronics Engineers Inc., p. 1-7 7 p. (OCEANS 2017 - Anchorage; vol. 2017-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Automatic target recognition
neural nets
target recognition
sonar
Sonar
2016
1 Citation (Scopus)

Active flow control of a turbulent boundary layer with large-window and stereo-PIV

Gomit, G., Ganapathisubramani, B., Berger, Z. P. & Lavoie, P., Jan 1 2016, 54th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA, Vol. 0.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow control
Velocity measurement
Boundary layers
Blow molding
Wall flow

Additive manufacturing of magnesium alloy powders: Investigations into process development using elektron®MAP+43 via laser powder bed fusion and directed energy deposition

Tandon, R., Palmer, T., Gieseke, M., Noelke, C. & Kaierle, S., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA), (World PM 2016 Congress and Exhibition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Magnesium alloys
Powders
Fusion reactions
Lasers
1 Citation (Scopus)

Advanced gradient-index lens design tools to maximize system performance and reduce SWaP

Campbell, S., Nagar, J., Brocker, D., Easum, J. A., Turpin, J. P. & Werner, D. H., Jan 1 2016, Advanced Optics for Defense Applications: UV through LWIR. Marasco, P. L., Andresen, B. F., Vizgaitis, J. N., Sanghera, J. S. & Snyder, M. P. (eds.). SPIE, Vol. 9822.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lens Design
lens design
System Performance
Lenses
Optics
1 Citation (Scopus)

Advanced sonar technologies for high clearance rate mine countermeasures

Sternlicht, D. D., Fernandez, J. E., Prater, J. L., Weaver, J. N., Isaacs, J. C., Montgomery, T. C., Loeffler, C. M. & Purcell, M., Nov 28 2016, OCEANS 2016 MTS/IEEE Monterey, OCE 2016. Institute of Electrical and Electronics Engineers Inc., 7761133

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synthetic aperture sonar
clearance rate
countermeasures
sonar
Sonar

Advancements in multi-objective and surrogate-Assisted GRIN lens design and optimization

Campbell, S., Nagar, J., Easum, J. A., Brocker, D., Werner, D. H. & Werner, P. L., Jan 1 2016, Novel Optical Systems Design and Optimization XIX. Davis, A. J., Hahlweg, C. F. & Mulley, J. R. (eds.). SPIE, Vol. 9948. 994807

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lens Design
lens design
gradient index optics
Gradient index optics
Lenses
5 Citations (Scopus)

Analytical formulation of the quantum electromagnetic cross section

Brandsema, M., Narayanan, R. M. & Lanzagorta, M., Jan 1 2016, Radar Sensor Technology XX. Doerry, A. & Ranney, K. I. (eds.). SPIE, Vol. 9829. 98291H

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Radar Cross Section
radar cross sections
Radar cross section
Cross section
electromagnetism

An analytical design methodology for dispersion-corrected metamaterial lenses

Brocker, D., Campbell, S., Werner, D. H. & Werner, P. L., Oct 25 2016, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1951-1952 2 p. 7696682. (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metamaterials
Ray tracing
ray tracing
Lenses
lenses
1 Citation (Scopus)

A new GRIN lens design paradigm based on wavefront matching

Nagar, J., Campbell, S., Brocker, D., Easum, J. A. & Werner, D. H., Oct 25 2016, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1603-1604 2 p. 7696508. (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

lens design
Wavefronts
Lenses
gradients
Gradient index optics

An in-depth study of peer influence on collective decision making for multi-party access control

Tyagi, A., Squicciarini, A., Rajtmajer, S. & Griffin, C., Jan 1 2016, Proceedings - 2016 IEEE 17th International Conference on Information Reuse and Integration, IRI 2016. Institute of Electrical and Electronics Engineers Inc., p. 305-314 10 p. (Proceedings - 2016 IEEE 17th International Conference on Information Reuse and Integration, IRI 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Access control
Decision making
Peer influence
Social networks
User studies

An investigation into acoustic dipole source calibration methods for turbomachinery sound radiation in reverberant fields

Jonson, M. L. & Young, S. D., Jan 1 2016, Acoustics, Vibration, and Wave Propagation. American Society of Mechanical Engineers (ASME), Vol. 13.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrophones
Turbomachinery
Acoustics
Acoustic waves
Calibration
1 Citation (Scopus)

An investigation of gas jets submerged in water

Fronzeo, M. & Kinzel, M. P., 2016, 46th AIAA Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluids
Gases
Water
Computational fluid dynamics
Turbulence
2 Citations (Scopus)

A physics-based tribology model and parametric assessments of loss-of-lubrication using reduced-order system level analysis

Yu, Q., Mclntyre, S., Kunz, R. F., Chang, L. & Bill, R., Jan 1 2016, 72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities. American Helicopter Society, Vol. 3. p. 2630-2645 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tribology
Lubrication
Physics
Gears
Heat transfer
3 Citations (Scopus)

Application of the discrete element roughness method to ice accretion geometries

Hanson, D. R. & Kinzel, M. P., Jan 1 2016, 46th AIAA Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, (46th AIAA Fluid Dynamics Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ice
Surface roughness
Geometry
Heat transfer
Glazes
6 Citations (Scopus)

Application of topology optimization and design for additive manufacturing guidelines on an automotive component

Reddy, S. N., Maranan, V., Simpson, T. W., Palmer, T. & Dickman, C. J., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Topology Optimization
Shape optimization
Manufacturing
Costs

A validation effort of dual jet flow simulations

Valenti, J. D., Fronzeo, M., Kinzel, M. P. & Myers, L. M., 2016, 46th AIAA Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow simulation
Turbulence models
Nozzles
Computational fluid dynamics
Aeroacoustics
4 Citations (Scopus)

Characterizing successful robotic insertion and removal from a dry storage cask using peg-like jamming and wedging analysis

McNelly, B. P., Leary, R., Brennan, S. N. & Reichard, K. M., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jamming
Robotics
Robots
Geometry
Inspection
10 Citations (Scopus)

Constrained social-energy minimization for multi-party sharing in online social networks

Rajtmajer, S., Squicciarini, A., Griffin, C., Karumanchi, S. & Tyagi, A., Jan 1 2016, AAMAS 2016 - Proceedings of the 2016 International Conference on Autonomous Agents and Multiagent Systems. International Foundation for Autonomous Agents and Multiagent Systems (IFAAMAS), p. 680-688 9 p. (Proceedings of the International Joint Conference on Autonomous Agents and Multiagent Systems, AAMAS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Access control
2 Citations (Scopus)

Corrosion resistant coatings for zirconium-alloy cladding with improved accident tolerance

Xu, P., Lahoda, E. J., Ray, S., Partezana, J. M., Sridharan, K. & Wolfe, D. E., Jan 1 2016, Top Fuel 2016: LWR Fuels with Enhanced Safety and Performance. American Nuclear Society, p. 1189-1196 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconium alloys
Accidents
Corrosion
Coatings
Oxidation resistance

Deriving an optimally deceptive policy in two-player iterated games

Paulson, E., Hamilton, B. A. & Griffin, C., Jul 28 2016, 2016 American Control Conference, ACC 2016. Institute of Electrical and Electronics Engineers Inc., p. 3808-3813 6 p. 7525506. (Proceedings of the American Control Conference; vol. 2016-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Costs
Genetic algorithms

Design and simulation of a shape memory alloy buoyancy heat engine in the low latitude thermocline

Angilella, A. J., Gandhi, F. S., Miller, T. F. & Dipalma, M., Jan 1 2016, 24th AIAA/AHS Adaptive Structures Conference. American Institute of Aeronautics and Astronautics Inc, AIAA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat engines
Buoyancy
Shape memory effect
Temperature distribution
Gliders
1 Citation (Scopus)

Determination of image resolution from SAS image statistics

Prater, J. L., King, J. L. & Brown, D., Feb 8 2016, OCEANS 2015 - MTS/IEEE Washington. Institute of Electrical and Electronics Engineers Inc., 7404483. (OCEANS 2015 - MTS/IEEE Washington).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

image resolution
SAS
Image resolution
Synthetic apertures
Statistics
1 Citation (Scopus)

Digital data requirements for powder bed fusion additive manufacturing and the implementation of a transparent communication architecture

Dunbar, A. J., Nassar, A. R., Reutzel, E. W. & Blecher, J. J., Jan 1 2016, SAMPE Long Beach 2016 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2016-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Powders
Fusion reactions
Communication
Naproxen

Dimensional accuracy and machine variability of titanium parts manufactured using the eos direct metal laser sintered (dmls) process

Mitchell, W. F., Reutzel, E. W., Merdes, T. A. & Lang, D. C., Jan 1 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 211-215 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Efficient modeling of a small circular loop coupling to multi-conductor transmission lines above a PEC ground

Qin, Y., Brocker, D., Werner, P. L., Werner, D. H. & Zhou, C., Oct 25 2016, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1977-1978 2 p. 7696695

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric conductors
electric conductors
Induced currents
transmission lines
Electric lines

Efficient modeling of the coupling from a small circular loop to a multi-conductor transmission line above a lossy ground

Qin, Y., Brocker, D., Werner, P. L., Werner, D. H. & Zhou, C., Oct 25 2016, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1979-1980 2 p. 7696696. (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

loop antennas
Loop antennas
current distribution
transmission lines
Electric lines

Embedded wireless corrosion detection technology

Banks, J., Reichard, K. M., Sinding, K., Ledford, K. & Tittmann, B. R., Jun 27 2016, 2016 IEEE Aerospace Conference, AERO 2016. IEEE Computer Society, Vol. 2016-June. 7500562

Research output: Chapter in Book/Report/Conference proceedingConference contribution

corrosion
Corrosion
repair
sensor
Repair
4 Citations (Scopus)

Energy-based path planning for skid-steer vehicles operating in areas with mixed surface types

Pentzer, J. L., Reichard, K. M. & Brennan, S. N., Jul 28 2016, 2016 American Control Conference, ACC 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-July. p. 2110-2115 6 p. 7525230

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Robots
Kinematics
Energy conservation
Sampling