• United States

Research Output 1963 2019

Filter
Article
2019
1 Citation (Scopus)

Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys

Zuback, J. S., Palmer, T. & Debroy, T., Jan 5 2019, In : Journal of Alloys and Compounds. 770, p. 995-1003 9 p.

Research output: Contribution to journalArticle

3D printers
Carbon
Dissimilar metals
Welds
Microstructure
Bubbles (in fluids)
Cavitation
Computational fluid dynamics
Liquids
Vapors

An assessment of pressure variations in artificially ventilated cavities

Fronzeo, M. A., Kinzel, M. P. & Lindau, J. W. V., Apr 1 2019, In : Ocean Engineering. 177, p. 85-96 12 p.

Research output: Contribution to journalArticle

Computational fluid dynamics
Vortex flow
Carbon fibers
Polymers
Fabrication
Uncertainty
carbon fiber

Comparison of water, helium, and carbon dioxide as coolants for next generation power plants using TRACE

Garrett, G. & Watson, J. K., Apr 1 2019, In : Annals of Nuclear Energy. 126, p. 292-302 11 p.

Research output: Contribution to journalArticle

Coolants
Helium
Carbon dioxide
Power plants
Engines

Computed Tomography Data to Generate a Reproducible, Anatomically Accurate Hemilaryngeal Model

Hintze, J. M., Myers, C. E., McPhail, M. J., Tchoukalova, Y. D. & Lott, D. G., Jan 1 2019, In : Otolaryngology - Head and Neck Surgery (United States).

Research output: Contribution to journalArticle

Vocal Cords
Larynx
Tomography
Laryngeal Neoplasms
Regenerative Medicine
Imitation
Cascades (fluid mechanics)
Dynamic Networks
Difference equations
Network Topology

Coupled simulations of atmospheric turbulence-modified ship airwakes and helicopter flight dynamics

Thedin, R., Kinzel, M. P., Horn, J. F. & Schmitz, S., Jan 1 2019, In : Journal of Aircraft. 56, 2, p. 812-824 13 p.

Research output: Contribution to journalArticle

Atmospheric boundary layer
Atmospheric turbulence
Flight dynamics
Helicopters
Ships

Depth-Dependent Geoacoustic Inferences With Dispersion at the New England Mud Patch via Reflection Coefficient Inversion

Belcourt, J., Holland, C., Dosso, S. E., Dettmer, J. & Goff, J. A., Jan 1 2019, (Accepted/In press) In : IEEE Journal of Oceanic Engineering.

Research output: Contribution to journalArticle

Sediments
Acoustic wave velocity
Shearing

Durable aluminate toughened zirconate composite thermal barrier coating (TBC) materials for high temperature operation

Schmitt, M. P., Stokes, J. L., Rai, A. K., Schwartz, A. J. & Wolfe, D. E., Jan 1 2019, In : Journal of the American Ceramic Society.

Research output: Contribution to journalArticle

High temperature operations
Thermal barrier coatings
Composite coatings
Fracture toughness
Durability
4 Citations (Scopus)
Repair
Porosity
Mechanical properties
Microstructure
Substrates
1 Citation (Scopus)
Transesophageal Echocardiography
Swine
Equipment and Supplies
Law Enforcement
Sus scrofa

Evaluation of a subgrid-scale computational fluid dynamics model for ice roughness

Hanson, D. R. & Kinzel, M. P., Jan 1 2019, In : Journal of Aircraft. 56, 2, p. 787-799 13 p.

Research output: Contribution to journalArticle

Ice
Dynamic models
Computational fluid dynamics
Surface roughness
Heat transfer

Formation processes for large ejecta and interactions with melt pool formation in powder bed fusion additive manufacturing

Nassar, A. R., Gundermann, M. A., Reutzel, E. W., Guerrier, P., Krane, M. H. & Weldon, M. J., Dec 1 2019, In : Scientific reports. 9, 1, 5038.

Research output: Contribution to journalArticle

Open Access
Powders
Particle Size
Lasers
Behavior Observation Techniques

Generalized Polynomial Chaos With Optimized Quadrature Applied to a Turbulent Boundary Layer Forced Plate

Wixom, A. S., Walters, G. S., Martinelli, S. L. & Williams, D. M., Feb 1 2019, In : Journal of Computational and Nonlinear Dynamics. 14, 2, 021010.

Research output: Contribution to journalArticle

Turbulent Boundary Layer
Polynomial Chaos
Generalized Polynomials
Quadrature
Chaos theory

Higher-order free-wake method for propeller-wing systems

Cole, J. A., Maughmer, M. D., Kinzel, M. P. & Bramesfeld, G., Jan 1 2019, In : Journal of Aircraft. 56, 1, p. 150-165 16 p.

Research output: Contribution to journalArticle

Propellers
Conceptual design
Vorticity
Propulsion
Computational fluid dynamics

Improving model parameters in vibrating systems using neumann series

Liem, A. T., Gregory McDaniel, J. & Wixom, A. S., Feb 1 2019, In : Journal of Vibration and Acoustics, Transactions of the ASME. 141, 1, 011017.

Research output: Contribution to journalArticle

Taylor series
Stiffness matrix
Vibrations (mechanical)
Equations of motion
estimates

Linearized Bayesian Inversion for Experiment Geometry at the New England Mud Patch

Belcourt, J., Dosso, S. E., Holland, C. & Dettmer, J., Jan 1 2019, (Accepted/In press) In : IEEE Journal of Oceanic Engineering.

Research output: Contribution to journalArticle

Geometry
Bathymetry
Experiments
Nonlinear analysis
Global positioning system

Modeling of slightly-compressible isentropic flows and compressibility effects on fluid-structure interactions

Zhang, L. T., Krane, M. H. & Yu, F., Mar 30 2019, In : Computers and Fluids. 182, p. 108-117 10 p.

Research output: Contribution to journalArticle

Compressible flow
Fluid structure interaction
Compressibility
Fluids
Acoustic waves

Neutronic and mechanical evaluation of rare earth doped and undoped nitride-based coatings for accident tolerant fuels

Alat, E., Brova, M. J., Younker, I. M., Motta, A. T., Fratoni, M. & Wolfe, D. E., May 1 2019, In : Journal of Nuclear Materials. 518, p. 419-430 12 p.

Research output: Contribution to journalArticle

accidents
Nitrides
Rare earths
nitrides
Accidents
3D printers
Powders
Feedstocks
Fusion reactions

Opinion dynamics in the presence of increasing agreement pressure

Semonsen, J., Griffin, C., Squicciarini, A. & Rajtmajer, S., Apr 1 2019, In : IEEE Transactions on Cybernetics. 49, 4, p. 1270-1278 9 p., 8291046.

Research output: Contribution to journalArticle

Complex networks
1 Citation (Scopus)

Pareto Optimal Decision Making in a Distributed Opportunistic Sensing Problem

Fitzgerald, J. & Griffin, C., Feb 1 2019, In : IEEE Transactions on Cybernetics. 49, 2, p. 719-725 7 p., 8098606.

Research output: Contribution to journalArticle

Decision making
Sensors
Polynomials
Computational complexity

Scattering statistics of rock outcrops: Model-data comparisons and Bayesian inference using mixture distributions

Olson, D. R., Lyons, A. P., Abraham, D. A. & Sbø, T. O., Feb 1 2019, In : Journal of the Acoustical Society of America. 145, 2, p. 761-774 14 p.

Research output: Contribution to journalArticle

outcrops
inference
statistics
rocks
scattering

Sequential hypothesis tests for streaming data via symbolic time-series analysis

Virani, N., Jha, D. K., Ray, A. & Phoha, S., May 1 2019, In : Engineering Applications of Artificial Intelligence. 81, p. 234-246 13 p.

Research output: Contribution to journalArticle

Time series analysis
Time series
Dynamical systems
Statistics
Testing
1 Citation (Scopus)

Tailoring particle alignment and grain orientation during tape casting and templated grain growth

Walton, R. L., Vaudin, M. D., Hofer, A. K., Kupp, E. R., Meyer, Jr., R. J. & Messing, G. L., May 1 2019, In : Journal of the American Ceramic Society. 102, 5, p. 2405-2414 10 p.

Research output: Contribution to journalArticle

Grain growth
Tapes
Casting
Torque
Full width at half maximum

Transmission-error frequency-domain-behavior of failing gears

Mark, W. D., Isaacson, A. C. & Wagner, M. E., Jan 15 2019, In : Mechanical Systems and Signal Processing. 115, p. 102-119 18 p.

Research output: Contribution to journalArticle

Gears
Gear teeth
Fatigue of materials
Bending (deformation)
Spalling

Use of noise correlation matrices to interpret ocean ambient noise

Nichols, S. M. & Bradley, D., Apr 1 2019, In : Journal of the Acoustical Society of America. 145, 4, p. 2337-2349 13 p.

Research output: Contribution to journalArticle

sound generators
Acoustic generators
principal components analysis
Principal component analysis
oceans

Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength

Brown, D. W., Adams, D. P., Balogh, L., Carpenter, J. S., Clausen, B., Livescu, V., Martinez, R. M., Morrow, B. M., Palmer, T., Pokharel, R., Strantza, M. & Vogel, S. C., Jul 15 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 7, p. 3399-3413 15 p.

Research output: Contribution to journalArticle

Stainless Steel
Neutron diffraction
Strength of materials
neutron diffraction
stainless steels

Validation of the discrete element roughness method for predicting heat transfer on rough surfaces

Hanson, D. R., Kinzel, M. P. & McClain, S. T., Jun 1 2019, In : International Journal of Heat and Mass Transfer. 136, p. 1217-1232 16 p.

Research output: Contribution to journalArticle

roughness
Surface roughness
heat transfer
Heat transfer
sands

WeldANA: Welding decision support tool for conceptual design

Miller, S. W., Finke, D. A., Kupinski, M. & Ligetti, C. B., Apr 1 2019, In : Journal of Manufacturing Systems. 51, p. 120-131 12 p.

Research output: Contribution to journalArticle

Conceptual design
Welding
Design aids
Weldability
Decision theory
Powders
Perovskite
Doping (additives)
Oxygen vacancies
Air
2018

A bio-inspired climb and glide energy utilization strategy for undersea vehicle transit

Miller, T. F., Feb 1 2018, In : Ocean Engineering. 149, p. 78-94 17 p.

Research output: Contribution to journalArticle

Energy utilization
Fish
Hotels
Animals
Drag reduction
1 Citation (Scopus)

A multiphase level-set approach for all-Mach numbers

Kinzel, M. P., Lindau, J. W. V. & Kunz, R. F., May 15 2018, In : Computers and Fluids. 167, p. 1-16 16 p.

Research output: Contribution to journalArticle

Mach number
Conservation
Compressible flow
Multiphase flow
3 Citations (Scopus)
Atmospheric boundary layer
Atmospheric turbulence
Ships
Helicopters
Geometry
5 Citations (Scopus)
3D printers
Powders
Tomography
Learning systems
Fusion reactions
5 Citations (Scopus)

Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing

Dunbar, A. J. & Nassar, A. R., Jan 2 2018, In : Virtual and Physical Prototyping. 13, 1, p. 14-19 6 p.

Research output: Contribution to journalArticle

3D printers
Process Monitoring
Process monitoring
Powder
Fusion
1 Citation (Scopus)

Atomic layer deposition of PbTiO3 and PbZrxTi1-xO3 films using metal alkyl and alkylamide precursors

Sbrockey, N. M., Tompa, G. S., Lavelle, R., Trumbull, K. A., Fanton, M. A., Snyder, D. W., Polcawich, R. G. & Potrepka, D. M., May 2 2018, In : Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 36, 3, 031509.

Research output: Contribution to journalArticle

Atomic layer deposition
atomic layer epitaxy
metal films
Metals
Zirconium

Coherent perfect absorption in a weakly absorbing fiber

Jahromi, A. K., Van Newkirk, A. & Abouraddy, A. F., Aug 1 2018, In : IEEE Photonics Journal. 10, 4, 8376000.

Research output: Contribution to journalArticle

Open Access
Fiber lasers
fibers
Fibers
fiber lasers
Fiber amplifiers
1 Citation (Scopus)

Comparison of Single-Phase and Two-Phase Composite Thermal Barrier Coatings with Equal Total Rare-Earth Content

Rai, A. K., Schmitt, M. P., Dorfman, M. R., Zhu, D. & Wolfe, D. E., Apr 1 2018, In : Journal of Thermal Spray Technology. 27, 4, p. 556-565 10 p.

Research output: Contribution to journalArticle

Thermal barrier coatings
Composite coatings
Rare earths
rare earth elements
coatings
Thermal barrier coatings
Composite coatings
Rare earths
sprayers
rare earth elements
4 Citations (Scopus)
Precipitates
Microstructure
Shape memory effect
Austenite
3D printers
2 Citations (Scopus)

Design and evaluation of an additively manufactured aircraft heat exchanger

Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jun 25 2018, In : Applied Thermal Engineering. 138, p. 254-263 10 p.

Research output: Contribution to journalArticle

3D printers
Heat exchangers
Aircraft
Geometry
Heat transfer
3 Citations (Scopus)
Fidelity
Modeling
Model
Structural Design
Decision Model

Dynamic stabilization of the Rayleigh-Bénard instability by acceleration modulation

Swaminathan, A., Garrett, S. L., Poese, M. E. & Smith, R. W., Oct 1 2018, In : Journal of the Acoustical Society of America. 144, 4, p. 2334-2343 10 p.

Research output: Contribution to journalArticle

convection
stabilization
modulation
containers
vibration
2 Citations (Scopus)
Preheating
Lasers
Substrates
Laser cladding
Stress relaxation
2 Citations (Scopus)
Heterojunctions
insulators
engineering
condensed matter physics
symmetry
1 Citation (Scopus)

Imaging shallow gas migration pathways in a mud-volcano province using an autonomous underwater vehicle (Malta Plateau, Mediterranean Sea)

Savini, A., Pinson, S., Bistacchi, A., Etiope, G. & Holland, C., Jan 1 2018, In : Near Surface Geophysics. 16, 6, p. 681-699 19 p.

Research output: Contribution to journalArticle

Malta
underwater vehicles
Mediterranean Sea
mud volcano
autonomous underwater vehicle
2 Citations (Scopus)

Impact of compositional gradients on selectivity of dissolvable support structures for directed energy deposited metals

Lefky, C. S., Zucker, B., Nassar, A. R., Simpson, T. W. & Hildreth, O. J., Jul 1 2018, In : Acta Materialia. 153, p. 1-7 7 p.

Research output: Contribution to journalArticle

Stainless Steel
Metals
Stainless steel
Materials properties
Corrosion
2 Citations (Scopus)

Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel

Meredith, S. D., Zuback, J. S., Keist, J. S. & Palmer, T., Dec 19 2018, In : Materials Science and Engineering A. 738, p. 44-56 13 p.

Research output: Contribution to journalArticle

Stainless Steel
stainless steels
grade
heat treatment
Nitrogen