Applied Research Laboratory (ARL)

Article

Direct observations of rapid diffusion of Cu in Au thin films using in situ x-ray diffraction

Elmer, J. W., Palmer, T. & Specht, E. D., Jul 1 2006, In : Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 24, 4, p. 978-987 10 p., 102604JVA.

Research output: Contribution to journal › Article

x ray diffraction

Diffraction

X rays

Thin films

thin films

85 Citations (Scopus)

Direct observations of sigma phase formation in duplex stainless steels using In-situ synchrotron X-ray diffraction

Elmer, J. W., Palmer, T. & Specht, E. D., Mar 1 2007, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38, 3, p. 464-475 12 p.

Research output: Contribution to journal › Article

Stainless Steel

Synchrotrons

stainless steels

synchrotrons

Stainless steel

17 Citations (Scopus)

Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld

Palmer, T. & Elmer, J. W., Sep 1 2005, In : Scripta Materialia. 53, 5, p. 535-540 6 p.

Research output: Contribution to journal › Article

pearlite

Pearlite

Steel

austenite

Austenite

11 Citations (Scopus)

Direct observations of the α → γ transformation at different input powers in the heat-affected zone of 1045 C-Mn steel Arc welds observed by spatially resolved X-ray diffraction

Palmer, T. & Elmer, J. W., Jan 1 2005, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 36, 12, p. 3353-3369 17 p.

Research output: Contribution to journal › Article

heat affected zone

Steel

Heat affected zone

austenite

Austenite

4 Citations (Scopus)

DISCONTINUOUS PRECIPITATION IN Co-3wt. % Ti-2wt. % Fe ALLOY.

Singh, J., Lele, S. & Ranganathan, S., Jan 1 1981, In : Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 72, 7, p. 469-475 7 p.

Research output: Contribution to journal › Article

Aging of materials

spacing

Temperature

temperature

Light transmission

13 Citations (Scopus)

Discrete simulation development for a proposed shipyard steel processing facility

Williams, D. L., Finke, D. A., Medeiros, D. J. & Traband, M. T., 2001, In : Winter Simulation Conference Proceedings. 2, p. 882-887 6 p.

Research output: Contribution to journal › Article

Shipyards

Steel

Processing

Business Rules

Simulation

2 Citations (Scopus)

Discrimination between discrete and continuum scattering from the sub-seafloor

Holland, C., Steininger, G. & Dosso, S. E., Jan 1 2015, In : Journal of the Acoustical Society of America. 138, 2, p. 663-673 11 p.

Research output: Contribution to journal › Article

discrimination

continuums

scattering

sediments

marine environments

13 Citations (Scopus)

Dislocation shielding and flaw tolerance in titanium nitride

Kumar, S., Wolfe, D. E. & Haque, M. A., May 1 2011, In : International journal of plasticity. 27, 5, p. 739-747 9 p.

Research output: Contribution to journal › Article

Titanium nitride

Shielding

Defects

Titanium

Stress concentration

55 Citations (Scopus)

Displacement amplification of electroactive materials using the cymbal flextensional transducer

Meyer, Jr., R. J., Dogan, A., Yoon, C., Pilgrim, S. M. & Newnham, R. E., Jan 5 2001, In : Sensors and Actuators, A: Physical. 87, 3, p. 157-162 6 p.

Research output: Contribution to journal › Article

Amplification

Transducers

transducers

Lead

niobates

3 Citations (Scopus)

Dissolution of nitroglycerin from small arms propellants and their residues

Taylor, S., Richardson, C., Lever, J. H., Pitt, J. S., Bigl, S., Perron, N. & Bradley, J. P., Dec 1 2011, In : International Journal of Energetic Materials and Chemical Propulsion. 10, 5, p. 397-419 23 p.

Research output: Contribution to journal › Article

Nitroglycerin

Propellants

Dissolution

Nitrocellulose

Soils

17 Citations (Scopus)

Dissolvable metal supports for 3D direct metal printing

Hildreth, O. J., Nassar, A. R., Chasse, K. R. & Simpson, T. W., Jun 1 2016, In : 3D Printing and Additive Manufacturing. 3, 2, p. 91-97 7 p.

Research output: Contribution to journal › Article

3D printers

Printing

Metals

Machining

Electrochemical etching

16 Citations (Scopus)

Dissolvable Supports in Powder Bed Fusion-Printed Stainless Steel

Lefky, C. S., Zucker, B., Wright, D., Nassar, A. R., Simpson, T. W. & Hildreth, O. J., Mar 2017, In : 3D Printing and Additive Manufacturing. 4, 1, p. 3-11 9 p.

Research output: Contribution to journal › Article

Stainless Steel

Powders

Fusion reactions

Stainless steel

Dissolution

1 Citation (Scopus)

Distributed medium access control with conditionally altruistic users

Antoniadis, P., Fdida, S., Griffin, C., Jin, Y. & Kesidis, G., Dec 1 2013, In : Eurasip Journal on Wireless Communications and Networking. 2013, 1, 202.

Research output: Contribution to journal › Article

Medium access control

Carrier sense multiple access

Local area networks

Flow rate

Throughput

8 Citations (Scopus)

Distributed network control for mobile multi-modal wireless sensor networks

Bein, D., Wen, Y., Phoha, S., Madan, B. B. & Ray, A., Mar 1 2011, In : Journal of Parallel and Distributed Computing. 71, 3, p. 460-470 11 p.

Research output: Contribution to journal › Article

Distributed Networks

Sensor networks

Wireless Sensor Networks

Wireless sensor networks

Data Quality

6 Citations (Scopus)

Divergence of a stereotyped call in northern resident killer whales

Grebner, D. M., Parks, S. E., Bradley, D., Miksis-Olds, J. L., Capone, D. & Ford, J. K. B., Feb 1 2011, In : Journal of the Acoustical Society of America. 129, 2, p. 1067-1072 6 p.

Research output: Contribution to journal › Article

whales

divergence

British Columbia

straits

hydrophones

33 Citations (Scopus)

Drag reduction by coupled systems: Microbubble injection with homogeneous polymer and surfactant solutions

Fontaine, A. A., Deutsch, S., Brungart, T. A., Petrie, H. L. & Fenstermacker, M., Jan 1 1999, In : Experiments in Fluids. 26, 5, p. 397-403 7 p.

Research output: Contribution to journal › Article

drag reduction

Drag reduction

Surface-Active Agents

Skin friction

Polymers

11 Citations (Scopus)

Drag reduction on a flat plate at high reynolds number with slot-injected polymer solutions

Petrie, H. L., Brungart, T. A. & Fontaine, A. A., 1996, In : American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. 237, p. 3-7 5 p.

Research output: Contribution to journal › Article

Drag reduction

Polymer solutions

Reynolds number

Skin friction

Polymers

5 Citations (Scopus)

Dual-heater reactor design for hybrid physical-chemical vapor deposition of MgB₂ thin films

Lamborn, D. R., Wilke, R. H. T., Li, Q., Xi, X. X., Snyder, D. W. & Redwing, J. M., Jun 1 2007, In : IEEE Transactions on Applied Superconductivity. 17, 2, p. 2862-2866 5 p.

Research output: Contribution to journal › Article

reactor design

Physical vapor deposition

heaters

Chemical vapor deposition

vapor deposition

2 Citations (Scopus)

Dual temperature process for reduction in regrowth interfacial charge in AlGaN/GaN HEMTs grown on GaN substrates

Eichfeld, S. M., Won, D., Trumbull, K., Labella, M., Weng, X., Robinson, J. A., Snyder, D. W., Redwing, J. M., Paskova, T., Udwary, K., Mulholland, G., Preble, E. & Evans, K. R., Jul 1 2011, In : Physica Status Solidi (C) Current Topics in Solid State Physics. 8, 7-8, p. 2053-2055 3 p.

Research output: Contribution to journal › Article

high electron mobility transistors

temperature compensation

metalorganic chemical vapor deposition

temperature

electrical properties

Durable aluminate toughened zirconate composite thermal barrier coating (TBC) materials for high temperature operation

Schmitt, M. P., Stokes, J. L., Rai, A. K., Schwartz, A. J. & Wolfe, D. E., Aug 1 2019, In : Journal of the American Ceramic Society. 102, 8, p. 4781-4793 13 p.

Research output: Contribution to journal › Article

High temperature operations

Thermal barrier coatings

Composite coatings

Fracture toughness

Durability

28 Citations (Scopus)

Dynamic agent classification and tracking using an ad hoc mobile acoustic sensor network

Friedlander, D., Griffin, C., Jacobson, N., Phoha, S. & Brooks, R. R., Mar 15 2003, In : Eurasip Journal on Applied Signal Processing. 2003, 4, p. 371-377 7 p.

Research output: Contribution to journal › Article

Sensor networks

Acoustics

Sensors

Microsensors

Mobile ad hoc networks

4 Citations (Scopus)

Dynamic clustering of multi-modal sensor networks in urban scenarios

Wen, Y., Bein, D. & Phoha, S., Jan 1 2014, In : Information Fusion. 15, 1, p. 130-140 11 p.

Research output: Contribution to journal › Article

Sensor networks

Sensor nodes

Controllers

Magnetic sensors

Sensors

5 Citations (Scopus)

Dynamics of temporal variations in phonatory flow

Krane, M. H., Barry, M. & Wei, T., Jul 1 2010, In : Journal of the Acoustical Society of America. 128, 1, p. 372-383 12 p.

Research output: Contribution to journal › Article

inertia

cycles

Bernoulli theorem

jet flow

waveforms

Dynamic stabilization of the Rayleigh-Bénard instability by acceleration modulation

Swaminathan, A., Garrett, S. L., Poese, M. E. & Smith, R. W., Oct 1 2018, In : Journal of the Acoustical Society of America. 144, 4, p. 2334-2343 10 p.

Research output: Contribution to journal › Article

convection

stabilization

modulation

containers

vibration

6 Citations (Scopus)

Effective Mass Effects in Triangular Quantum Wells Achieved From Compositional Grading

Schwartz, C., Aug 1988, In : IEEE Journal of Quantum Electronics. 24, 8, p. 1712-1715 4 p.

Research output: Contribution to journal › Article

Electron energy levels

Semiconductor quantum wells

energy levels

quantum wells

flat layers

10 Citations (Scopus)

Effect of a downstream ventilated gas cavity on turbulent boundary layer wall pressure fluctuation spectra

Young, S. D., Brungart, T. A., Lauchle, G. C. & Howe, M. S., Dec 1 2005, In : Journal of the Acoustical Society of America. 118, 6, p. 3506-3512 7 p.

Research output: Contribution to journal › Article

wall pressure

turbulent boundary layer

upstream

cavities

gases

12 Citations (Scopus)

Effect of a moving wall on a fully developed, equilibrium turbulent boundary layer

Brungart, T. A., Lauchle, G. C., Deutsch, S. & Riggs, E. T., Apr 1 2001, In : Experiments in Fluids. 30, 4, p. 418-425 8 p.

Research output: Contribution to journal › Article

turbulent boundary layer

Boundary layers

boundary layers

Statistics

statistics

8 Citations (Scopus)

Effect of an applied electric field upon one-dimensional localization

Schwartz, C. & Ting, C. S., Jan 1 1987, In : Physical Review B. 36, 13, p. 7169-7172 4 p.

Research output: Contribution to journal › Article

electric fields

electrons

potential energy

causes

coefficients

Effect of artificial alert sound, background noise, and vehicle type on: Detectability and localizability of quiet cars by blind pedestrians

Emerson, R. W., Kim, D. S., Naghshineh, K. & Myers, K., Jan 1 2015, In : ITE Journal (Institute of Transportation Engineers). 85, 4, p. 42-44 3 p.

Research output: Contribution to journal › Article

Acoustic noise

Railroad cars

Acoustic waves

Internal combustion engines

Loudspeakers

8 Citations (Scopus)

Effect of directed energy deposition processing parameters on laser deposited Inconel^® 718: Microstructure, fusion zone morphology, and hardness

Kistler, N. A., Nassar, A. R., Reutzel, E. W., Corbin, D. & Beese, A. M., May 1 2017, In : Journal of Laser Applications. 29, 2, 022005.

Research output: Contribution to journal › Article

Inconel (trademark)

Fusion reactions

hardness

fusion

Hardness

8 Citations (Scopus)

Effect of directed energy deposition processing parameters on laser deposited Inconel^® 718: External morphology

Corbin, D., Nassar, A. R., Reutzel, E. W., Beese, A. M. & Kistler, N. A., May 1 2017, In : Journal of Laser Applications. 29, 2, 022001.

Research output: Contribution to journal › Article

Inconel (trademark)

beads

Profilometry

Lasers

Processing

40 Citations (Scopus)

Effect of extended solid solution of Hf on the microstructure of the laser clad Ni-Fe-Cr-Al-Hf alloys

Singh, J. & Mazumder, J., Jan 1 1987, In : Acta Metallurgica. 35, 8, p. 1995-2003 9 p.

Research output: Contribution to journal › Article

Solid solutions

Laser cladding

Microstructure

Lasers

Scanning electron microscopy

9 Citations (Scopus)

Effect of Fast-Neutron Irradiation on the Pressure and Temperature Dependence of the Elastic Moduli of SiO₂ Glass

Strakna, R. E., Clark, A. E., Bradley, D. & Slie, W. M., Dec 1 1963, In : Journal of Applied Physics. 34, 5, p. 1439-1443 5 p.

Research output: Contribution to journal › Article

neutron irradiation

fast neutrons

pressure dependence

modulus of elasticity

temperature dependence

11 Citations (Scopus)

Effect of Gd content on mechanical properties and erosion durability of sub-stoichiometric Gd₂Zr₂O₇

Schmitt, M. P., Stokes, J. L., Gorin, B. L., Rai, A. K., Zhu, D., Eden, T. J. & Wolfe, D. E., Mar 15 2017, In : Surface and Coatings Technology. 313, p. 177-183 7 p.

Research output: Contribution to journal › Article

durability

Rare earths

erosion

Erosion

Durability

119 Citations (Scopus)

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys

Denlinger, E. R., Heigel, J. C., Michaleris, P. & Palmer, T., Jan 1 2015, In : Journal of Materials Processing Technology. 215, p. 123-131 9 p.

Research output: Contribution to journal › Article

3D printers

Nickel alloys

Titanium alloys

Residual stresses

Lasers

2 Citations (Scopus)

Effect of liquid phase additions on microstructure and thermal properties in copper and copper-diamond composites

Rape, A., Liu, X., Kulkarni, A. & Singh, J., 2014, In : Advances in Materials Science and Engineering. 2014, 832308.

Research output: Contribution to journal › Article

Diamond

Copper

Diamonds

Thermodynamic properties

Microstructure

Effect of prior deformation on Co-Ti, Co-Ti-Nb and Co-Ti-Fe alloys

Singh, J., Apr 1 1986, In : Journal of Materials Science. 21, 4, p. 1134-1138 5 p.

Research output: Contribution to journal › Article

Ternary alloys

Hardness

Isotherms

Annealing

Transmission electron microscopy

12 Citations (Scopus)

Effect of processing conditions on the microstructure, porosity, and mechanical properties of Ti-6Al-4V repair fabricated by directed energy deposition

Kistler, N. A., Corbin, D., Nassar, A. R., Reutzel, E. W. & Beese, A. M., Feb 1 2019, In : Journal of Materials Processing Technology. 264, p. 172-181 10 p.

Research output: Contribution to journal › Article

Repair

Porosity

Mechanical properties

Microstructure

Substrates

148 Citations (Scopus)

Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing

Wang, Z., Palmer, T. & Beese, A. M., May 15 2016, In : Acta Materialia. 110, p. 226-235 10 p.

Research output: Contribution to journal › Article

3D printers

Austenitic stainless steel

Tensile properties

Microstructure

Processing

4 Citations (Scopus)

Effect of soot self-absorption on color-ratio pyrometry in laminar coflow diffusion flames

Kempema, N. & Long, M. B., Mar 1 2018, In : Optics Letters. 43, 5, p. 1103-1106 4 p.

Research output: Contribution to journal › Article

self absorption

diffusion flames

soot

temperature measurement

color

25 Citations (Scopus)

Effect of substrate misorientation on surface morphology of homoepitaxial CdTe films grown by organometallic vapor phase epitaxy

Snyder, D. W., Mahajan, S., Ko, E. I. & Sides, P. J., Dec 1 1991, In : Applied Physics Letters. 58, 8, p. 848-850 3 p.

Research output: Contribution to journal › Article

vapor phase epitaxy

misalignment

poles

spherical caps

curves

43 Citations (Scopus)

Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens

Ziemian, C. W., Sharma, M. M., Bouffard, B. D., Nissley, T. & Eden, T. J., Jan 1 2014, In : Materials and Design. 54, p. 212-221 10 p.

Research output: Contribution to journal › Article

Fatigue of materials

Coatings

Blasting

Substrates

Shot peening

4 Citations (Scopus)

Effect of substrate thickness and preheating on the distortion of laser deposited ti-6al-4v

Corbin, D., Nassar, A. R., Reutzel, E. W., Beese, A. M. & Michaleris, P., Jun 1 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 6, 061009.

Research output: Contribution to journal › Article

Preheating

Lasers

Substrates

Laser cladding

Stress relaxation

22 Citations (Scopus)

Effect of Surface Preparation on the Microstructure, Adhesion, and Tensile Properties of Cold-Sprayed Aluminum Coatings on AA2024 Substrates

Sharma, M. M., Eden, T. J. & Golesich, B. T., Jan 1 2014, In : Journal of Thermal Spray Technology. 24, 3, p. 410-422 13 p.

Research output: Contribution to journal › Article

Aluminum coatings

aluminum coatings

sprayed coatings

Sprayed coatings

tensile properties

10 Citations (Scopus)

Effects of a compositionally graded buffer layer on stress evolution during GaN and Al_xGa_1-xN MOCVD on SiC substrates

Acord, J. D., Weng, X., Dickey, E. C., Snyder, D. W. & Redwing, J. M., Apr 1 2008, In : Journal of Crystal Growth. 310, 7-9, p. 2314-2319 6 p.

Research output: Contribution to journal › Article

Organic Chemicals

Organic chemicals

Buffer layers

metalorganic chemical vapor deposition

Chemical vapor deposition

5 Citations (Scopus)

Effects of composition on dislocation microstructure and stress in Si-doped Al_xGa_1-xN

Manning, I. C., Weng, X., Fanton, M. A., Snyder, D. W. & Redwing, J. M., Apr 1 2010, In : Journal of Crystal Growth. 312, 8, p. 1301-1306 6 p.

Research output: Contribution to journal › Article

Epilayers

Tensile stress

inclination

Transmission electron microscopy

Defects

1 Citation (Scopus)

Effects of contraction joint width, fill condition, faulting and beveling on wheel-slap noise

Dare, T. P., Bernhard, R. & Thornton, W., May 1 2011, In : Noise Control Engineering Journal. 59, 3, p. 228-233 6 p.

Research output: Contribution to journal › Article

Faulting

wheels

contraction

Noise

Wheels

Effects of crystal structure and cation size on molten silicate reactivity with environmental barrier coating materials

Stokes, J. L., Harder, B. J., Wiesner, V. L. & Wolfe, D. E., Jan 1 2019, (Accepted/In press) In : Journal of the American Ceramic Society.

Research output: Contribution to journal › Article

Silicates

Aluminosilicates

Magnesium

Cations

Molten materials

10 Citations (Scopus)

Effects of gravitational orientation on surface deformation and weld pool geometry during gas tungsten arc welding

Kang, N., Mahank, T. A., Kulkarni, A. K. & Singh, J., Mar 1 2003, In : Materials and Manufacturing Processes. 18, 2, p. 169-180 12 p.

Research output: Contribution to journal › Article

Tungsten

Electric arc welding

Welds

Gases

Welding

6 Citations (Scopus)

Effects of gravitational orientation on the microstructural evolution of gas tungsten arc welds in an Al-4 wt% Cu alloy

Kang, N., Singh, J. & Kulkarni, A. K., Sep 1 2003, In : Journal of Materials Science. 38, 17, p. 3579-3589 11 p.

Research output: Contribution to journal › Article

Tungsten

Microstructural evolution

Welds

Gases

Solidification