• United States

Research Output 1963 2019

Filter
Article
2016
1 Citation (Scopus)
velocity measurement
pulses
power spectra
Doppler effect
ground truth
40 Citations (Scopus)
Tensile strength
Geometry
Lasers
Substrates
Grain size and shape
2 Citations (Scopus)

Room and ultrahigh temperature structure-mechanical property relationships of tungsten alloys formed by field assisted sintering technique (FAST)

Browning, P. N., Alagic, S., Kulkarni, A. K., Matson, L. & Singh, J., Sep 30 2016, In : Materials Science and Engineering A. 674, p. 701-712 12 p.

Research output: Contribution to journalArticle

tungsten alloys
Tungsten alloys
Spark plasma sintering
sintering
Tungsten
3 Citations (Scopus)
sediments
dipping
acoustics
profiles
towing
32 Citations (Scopus)

Selection of powder or wire feedstock material for the laser cladding of Inconel® 625

Heigel, J. C., Gouge, M. F., Michaleris, P. & Palmer, T., May 1 2016, In : Journal of Materials Processing Technology. 231, p. 357-365 9 p.

Research output: Contribution to journalArticle

Laser Cladding
Laser cladding
Powder
Powders
Feedstocks

Simulation and Measurement of Medium-Frequency Signals Coupling from a Line to a Loop Antenna

Damiano, N. W., Li, J., Zhou, C., Brocker, D., Qin, Y., Werner, D. H. & Werner, P. L., Jul 1 2016, In : IEEE Transactions on Industry Applications. 52, 4, p. 3527-3534 8 p., 7422061.

Research output: Contribution to journalArticle

Loop antennas
Electric lines
Coal mines
Communication systems
Electric potential
12 Citations (Scopus)

Size, weight, and power reduction regimes in achromatic gradient-index singlets

Campbell, S., Brocker, D., Nagar, J. & Werner, D. H., May 1 2016, In : Applied Optics. 55, 13, p. 3594-3598 5 p.

Research output: Contribution to journalArticle

weight reduction
gradients
Lenses
lenses
curvature
3 Citations (Scopus)
boundary value problems
acoustics
formulations
dipoles
Value Problem

The 2015 AAAI fall symposium series reports

Ahmed, N., Bello, P., Bringsjord, S., Clark, M., Hayes, B., Kolobov, A., Miller, C., Oliehoek, F., Stein, F. & Spaan, M., Jun 1 2016, In : AI Magazine. 37, 2, p. 85-90 6 p.

Research output: Contribution to journalArticle

Human robot interaction
Intelligent agents
Decision making
4 Citations (Scopus)

The control of ventilated supercavity pulsation and noise

Skidmore, G. M., Brungart, T. A., Lindau, J. W. V. & Moeny, M. J., Oct 1 2016, In : International Journal of Multiphase Flow. 85, p. 14-22 9 p.

Research output: Contribution to journalArticle

Frequency modulation
Ventilation
Vortex flow
Parametric oscillators
Gases
12 Citations (Scopus)

The Importance of Hemorheology and Patient Anatomy on the Hemodynamics in the Inferior Vena Cava

Aycock, K. I., Campbell, R. L., Lynch, F., Manning, K. B. & Craven, B. A., Dec 1 2016, In : Annals of Biomedical Engineering. 44, 12, p. 3568-3582 15 p.

Research output: Contribution to journalArticle

Hemodynamics
Shear stress
Blood
Secondary flow
Viscosity
4 Citations (Scopus)

Thermal reliability of copper alloy-diamond composites produced by field-assisted sintering technology

Rape, A., Kulkarni, A. K., Bhat, B. & Singh, J., Apr 1 2016, In : Journal of Composite Materials. 50, 9, p. 1241-1245 5 p.

Research output: Contribution to journalArticle

Diamond
Spark plasma sintering
Copper alloys
Copper
Diamonds

Towards a unified multiresolution vision model for autonomous ground robots

Sustersic, Jr., J. P., Wyble, B. P., Advani, S. & Narayanan, V., Jan 1 2016, In : Robotics and Autonomous Systems. 75, p. 221-232 12 p.

Research output: Contribution to journalArticle

Multiresolution
Robot
Robots
Color
Color Image
4 Citations (Scopus)

Transition matrix model for evolutionary game dynamics

Ermentrout, G. B., Griffin, C. & Belmonte, A., Mar 21 2016, In : Physical Review E. 93, 3, 032138.

Research output: Contribution to journalArticle

Evolutionary Game
Transition Model
Transition Matrix
Matrix Models
games
52 Citations (Scopus)

Ultrasensitive vector bending sensor based on multicore optical fiber

Villatoro, J., Van Newkirk, A., Antonio-Lopez, E., Zubia, J., Schülzgen, A. & Amezcua-Correa, R., Feb 15 2016, In : Optics Letters. 41, 4, p. 832-835 4 p.

Research output: Contribution to journalArticle

optical fibers
sensors
fusion
asymmetry
sensitivity
3 Citations (Scopus)

Uncovering spatial variation in acoustic environments using sound mapping

Job, J. R., Myers, K. R., Naghshineh, K. & Gill, S. A., Jul 1 2016, In : PloS one. 11, 7, e0159883.

Research output: Contribution to journalArticle

Acoustics
Ecosystem
spatial variation
acoustics
Microphones
2 Citations (Scopus)

Using the sound of nuclear energy

Garrett, S., Smith, J., Smith, R. W., Heidrich, B. & Heibel, M., Sep 1 2016, In : Nuclear Technology. 195, 3, p. 353-362 10 p.

Research output: Contribution to journalArticle

Thermoacoustic engines
nuclear energy
Nuclear energy
reactors
Acoustic waves
11 Citations (Scopus)

Wavenumber transform analysis for acoustic black hole design

Feurtado, P. A. & Conlon, S. C., Jul 1 2016, In : Journal of the Acoustical Society of America. 140, 1, p. 718-727 10 p.

Research output: Contribution to journalArticle

acoustics
transverse oscillation
Acoustics
viscoelastic damping
acoustic coupling
2015
37 Citations (Scopus)

(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing

Schmelzle, J., Kline, E. V., Dickman, C. J., Reutzel, E. W., Jones, G. & Simpson, T. W., Nov 1 2015, In : Journal of Mechanical Design, Transactions Of the ASME. 137, 11, 111711.

Research output: Contribution to journalArticle

3D printers
Consolidation
Metals
Inspection
Engineers
14 Citations (Scopus)

3D spatial reconstruction of thermal characteristics in directed energy deposition through optical thermal imaging

Kriczky, D. A., Irwin, J., Reutzel, E. W., Michaleris, P., Nassar, A. R. & Craig, J., Jul 1 2015, In : Journal of Materials Processing Technology. 221, p. 172-186 15 p.

Research output: Contribution to journalArticle

Infrared imaging
3D printers
Microstructure
Hot Temperature
Process monitoring
14 Citations (Scopus)

Activated carbon efficient atomistic model construction that depicts experimentally-determined characteristics

Huang, Y., Cannon, F. S., Watson, J. K., Reznik, B. & Mathews, J. P., Mar 1 2015, In : Carbon. 83, p. 1-14 14 p.

Research output: Contribution to journalArticle

Activated carbon
Pore size
Microporosity
Graphite
Coal
8 Citations (Scopus)

Active flow control for high speed jets with large window PIV

Berger, Z. P., Shea, P. R., Berry, M. G., Noack, B. R., Gogineni, S. & Glauser, M. N., Jan 1 2015, In : Flow, Turbulence and Combustion. 94, 1, p. 97-123 27 p.

Research output: Contribution to journalArticle

particle image velocimetry
Flow control
Velocity measurement
high speed
Flow fields
11 Citations (Scopus)
3D printers
Pulsed lasers
Laser beams
pulsed lasers
hardness
2 Citations (Scopus)

A Hybrid approach for efficient modeling of medium-frequency propagation in coal mines

Brocker, D., Sieber, P. E., Waynert, J. A., Li, J., Werner, P. L. & Werner, D. H., Feb 1 2015, In : IEEE Antennas and Propagation Magazine. 57, 1, p. 164-176 13 p., 7056419.

Research output: Contribution to journalArticle

Coal mines
coal
propagation
communication
communication networks
3 Citations (Scopus)
boundary element method
resonant frequencies
fluids
damping
modal response
1 Citation (Scopus)

A Model Constraint for Polydisperse Solids in Multifluid Flows

Kinzel, M. P., Peltier, L. J., Rosendall, B., Elbert, M., Rizhakov, A., Berkoe, J. & Knight, K., Nov 1 2015, In : Journal of Fluids Engineering, Transactions of the ASME. 137, 11, 111104.

Research output: Contribution to journalArticle

Fluids
Flow of fluids
Dynamic models
Momentum
Computational fluid dynamics
32 Citations (Scopus)
Energy harvesting
Vibrations (mechanical)
Acoustics
vibration
acoustics
13 Citations (Scopus)

An in situ AFM study of the evolution of surface roughness for zinc electrodeposition within an imidazolium based ionic liquid electrolyte

Keist, J. S., Orme, C. A., Wright, P. K. & Evans, J. W., Jan 10 2015, In : Electrochimica Acta. 152, p. 161-171 11 p.

Research output: Contribution to journalArticle

Ionic Liquids
Ionic liquids
Electrodeposition
Electrolytes
Zinc
268 Citations (Scopus)

Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing

Carroll, B. E., Palmer, T. & Beese, A. M., Apr 1 2015, In : Acta Materialia. 87, p. 309-320 12 p.

Research output: Contribution to journalArticle

3D printers
Ductility
Mechanical properties
Oxygen
Yield stress
21 Citations (Scopus)

Bending sensor combining multicore fiber with a mode-selective photonic lantern

Van Newkirk, A., Antonio-Lopez, J. E., Velazquez-Benitez, A., Albert, J., Amezcua-Correa, R. & Schülzgen, A., Nov 15 2015, In : Optics Letters. 40, 22, p. 5188-5191 4 p.

Research output: Contribution to journalArticle

photonics
fibers
sensors
sensitivity
curvature
44 Citations (Scopus)

Ceramic coating for corrosion (c3) resistance of nuclear fuel cladding

Alat, E., Motta, A. T., Comstock, R. J., Partezana, J. M. & Wolfe, D. E., Nov 15 2015, In : Surface and Coatings Technology. 281, p. 133-143 11 p.

Research output: Contribution to journalArticle

Nuclear fuel cladding
ceramic coatings
Ceramic coatings
nuclear fuels
corrosion resistance
66 Citations (Scopus)

Compact fiber-optic curvature sensor based on super-mode interference in a seven-core fiber

Salceda-Delgado, G., Van Newkirk, A., Antonio-Lopez, J. E., Martinez-Rios, A., Schülzgen, A. & Correa, R. A., Jan 1 2015, In : Optics Letters. 40, 7, p. 1468-1471 4 p.

Research output: Contribution to journalArticle

fiber optics
curvature
interference
fibers
sensors

Composite thermal annealed pyrolytic graphite heat spreaders produced with field-assisted sintering technology

Rape, A., Gott, K., Singh, J. & Kulkarni, A. K., Jan 1 2015, In : Journal of Enhanced Heat Transfer. 22, 4, p. 267-280 14 p.

Research output: Contribution to journalArticle

Spreaders
Spark plasma sintering
Graphite
pyrolytic graphite
sintering
12 Citations (Scopus)

Construction Strategy for Atomistic Models of Coal Chars Capturing Stacking Diversity and Pore Size Distribution

Wang, CA., Watson, J. K., Louw, E. & Mathews, J. P., Aug 20 2015, In : Energy and Fuels. 29, 8, p. 4814-4826 13 p.

Research output: Contribution to journalArticle

Coal
Pore size
Helium
Microporosity
Order disorder transitions
17 Citations (Scopus)

Correcting for color crosstalk and chromatic aberration in multicolor particle shadow velocimetry

McPhail, M. J., Fontaine, A. A., Krane, M. H., Goss, L. & Crafton, J., Feb 1 2015, In : Measurement Science and Technology. 26, 2, 025302.

Research output: Contribution to journalArticle

Crosstalk
crosstalk
Aberrations
Aberration
Velocity measurement
Harvesters
Single crystals
Sensors
Lead
Scalability
1 Citation (Scopus)

Design and testing of a shape memory alloy buoyancy engine for unmanned underwater vehicles

Angilella, A. J., Gandhi, F. S. & Miller, T. F., Oct 12 2015, In : Smart Materials and Structures. 24, 11, 115018.

Research output: Contribution to journalArticle

underwater vehicles
shape memory alloys
Buoyancy
Shape memory effect
buoyancy
3 Citations (Scopus)

Design considerations for spatially reconfigurable metamaterials

Turpin, J. P., Werner, D. H. & Wolfe, D. E., Aug 1 2015, In : IEEE Transactions on Antennas and Propagation. 63, 8, p. 3513-3521 9 p., 7105384.

Research output: Contribution to journalArticle

Metamaterials
slabs
resonators
varactor diodes
tiles
4 Citations (Scopus)

Development of a selective automated blossom thinning system for peaches

Lyons, D., Heinemann, P. H., Schupp, J. R., Baugher, T. A. & Liu, J., Jan 1 2015, In : Transactions of the ASABE. 58, 6, p. 1447-1457 11 p.

Research output: Contribution to journalArticle

deblossoming
robotics
End effectors
Robotic arms
peaches
2 Citations (Scopus)

Discrimination between discrete and continuum scattering from the sub-seafloor

Holland, C., Steininger, G. & Dosso, S. E., Jan 1 2015, In : Journal of the Acoustical Society of America. 138, 2, p. 663-673 11 p.

Research output: Contribution to journalArticle

discrimination
continuums
scattering
sediments
marine environments

Effect of artificial alert sound, background noise, and vehicle type on: Detectability and localizability of quiet cars by blind pedestrians

Emerson, R. W., Kim, D. S., Naghshineh, K. & Myers, K. R., Jan 1 2015, In : ITE Journal (Institute of Transportation Engineers). 85, 4, p. 42-44 3 p.

Research output: Contribution to journalArticle

Acoustic noise
Railroad cars
Acoustic waves
Internal combustion engines
Loudspeakers
106 Citations (Scopus)

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys

Denlinger, E. R., Heigel, J. C., Michaleris, P. & Palmer, T., Jan 1 2015, In : Journal of Materials Processing Technology. 215, p. 123-131 9 p.

Research output: Contribution to journalArticle

3D printers
Nickel alloys
Titanium alloys
Residual stresses
Lasers
3 Citations (Scopus)

Employing microsecond pulses to form laser-fired contacts in photovoltaic devices

Raghavan, A. S., Palmer, T., Kragh-Buetow, K. C., Domask, A. C., Reutzel, E. W., Mohney, S. E. & Debroy, T., Aug 1 2015, In : Progress in Photovoltaics: Research and Applications. 23, 8, p. 1025-1036 12 p.

Research output: Contribution to journalArticle

Laser pulses
Aluminum
Lasers
pulses
lasers
10 Citations (Scopus)

Evaluation of ice-adhesion strength on erosion-resistant materials

Soltis, J., Palacios, J., Eden, T. J. & Wolfe, D. E., Jan 1 2015, In : AIAA journal. 53, 7, p. 1825-1835 11 p.

Research output: Contribution to journalArticle

Bond strength (materials)
Ice
Erosion
Titanium nitride
Coatings
6 Citations (Scopus)

Evaluation of Incoherent Interface Strength of Solid-State-Bonded Ti64/Stainless Steel Under Dynamic Impact Loading

Verma, D., Singh, J., Varma, A. H. & Tomar, V., Aug 27 2015, In : JOM. 67, 8, p. 1694-1703 10 p.

Research output: Contribution to journalArticle

Stainless Steel
Strength of materials
Stainless steel
Steel
Strain rate
16 Citations (Scopus)

Evaluation of the interfacial shear strength and residual stress of TiAlN coating on ZIRLO™ fuel cladding using a modified shear-lag model approach

Liu, Y., Bhamji, I., Withers, P. J., Wolfe, D. E., Motta, A. T. & Preuss, M., Mar 1 2015, In : Journal of Nuclear Materials. 466, p. 718-727 10 p.

Research output: Contribution to journalArticle

shear strength
Shear strength
residual stress
Residual stresses
time lag
3 Citations (Scopus)

Experimental evidence of modal wavenumber relation to zeros in the wavenumber spectrum of a simply supported plate (L)

Robin, O., Berry, A., Atalla, N., Hambric, S. A. & Shepherd, M. R., May 1 2015, In : Journal of the Acoustical Society of America. 137, 5, p. 2978-2981 4 p.

Research output: Contribution to journalArticle

thin plates
2 Citations (Scopus)

Failure prediction of pressure vessels using finite element analysis

Evans, C. J. & Miller, T. F., Oct 1 2015, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 137, 5, 051206.

Research output: Contribution to journalArticle

Pressure vessels
Finite element method
Welds
Elongation
Materials properties
1 Citation (Scopus)

Fast computation of seabed spherical-wave reflection coefficients in geoacoustic inversion

Quijano, J. E., Dosso, S. E., Dettmer, J. & Holland, C., Oct 1 2015, In : Journal of the Acoustical Society of America. 138, 4, p. 2106-2117 12 p.

Research output: Contribution to journalArticle

spherical waves
wave reflection
inversions
reflectance
Inversion
12 Citations (Scopus)

Fusion zone microstructure and geometry in complete-joint-penetration laser-arc hybrid welding of low-alloy steel

Wei, H. L., Blecher, J. J., Palmer, T. & Debroy, T., Jan 1 2015, In : Welding Journal. 94, 4, p. 135s-144s

Research output: Contribution to journalArticle

High strength steel
Welding
Fusion reactions
Microstructure
Geometry