• 500 University Dr.

    17033 Hershey

    United States

Research Output

Filter
Conference contribution
2019

But will it print? Assessing student use of design for additive manufacturing and exploring its effect on design performance and manufacturability

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Complex solutions for complex problems? Exploring the effects of task complexity on student use of design for additive manufacturing and creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Do students want to dissect? A survey of student opinions on the use of product dissection in the classroom

Riegel, C., Starkey, E. M., Hunter, S. T. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guidance system development for radial-probe endobronchial ultrasound bronchoscopy

Zhao, W., Bascom, R., Toth, J. & Higgins, W. E., Jan 1 2019, Medical Imaging 2019: Image-Guided Procedures, Robotic Interventions, and Modeling. Fei, B. & Linte, C. A. (eds.). SPIE, 109511P. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10951).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Leveraging animations to enhance learning through virtual product dissection

Kearney, K. G., Starkey, E. M. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Measuring and optimizing design variety using herfindahl index

Ahmed, F., Ramachandran, S. K., Fuge, M., Hunter, S. & Miller, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

New textured polyphosphazene biomaterials with improved biocompatibility

Xu, L., Chen, C., Allcock, H. R. & Siedlecki, C., Jan 1 2019, Society for Biomaterials Annual Meeting and Exposition 2019: The Pinnacle of Biomaterials Innovation and Excellence - Transactions of the 42nd Annual Meeting. Society for Biomaterials, 1 p. (Transactions of the Annual Meeting of the Society for Biomaterials and the Annual International Biomaterials Symposium; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Novel inverted tubular design for improved endoscope positioning

Saxena, A., Lagnese, I., Fell, B., Pauli, E., Haluck, R. & Moore, J., Jan 1 2019, Frontiers in Biomedical Devices, BIOMED - 2019 Design of Medical Devices Conference, DMD 2019. American Society of Mechanical Engineers (ASME), (Frontiers in Biomedical Devices, BIOMED - 2019 Design of Medical Devices Conference, DMD 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Real-time path-based fusion of spatial databases with temporal control inputs for assistive operation of wheelchairs

Wolkowicz, K. L., Leary, R. D., Moore, J. Z. & Brennan, S. N., Jan 1 2019, Advanced Driver Assistance and Autonomous Technologies; Advances in Control Design Methods; Advances in Robotics; Automotive Systems; Design, Modeling, Analysis, and Control of Assistive and Rehabilitation Devices; Diagnostics and Detection; Dynamics and Control of Human-Robot Systems; Energy Optimization for Intelligent Vehicle Systems; Estimation and Identification; Manufacturing. American Society of Mechanical Engineers (ASME), V001T05A009. (ASME 2019 Dynamic Systems and Control Conference, DSCC 2019; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Should it stay or should it go? A case study of concept screening in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Statistical determination of decision-making regions for branching paths: An algorithm with a wheelchair assistance application

Wolkowicz, K. L., Leary, R. D., Moore, J. Z. & Brennan, S. N., Jan 1 2019, Advanced Driver Assistance and Autonomous Technologies; Advances in Control Design Methods; Advances in Robotics; Automotive Systems; Design, Modeling, Analysis, and Control of Assistive and Rehabilitation Devices; Diagnostics and Detection; Dynamics and Control of Human-Robot Systems; Energy Optimization for Intelligent Vehicle Systems; Estimation and Identification; Manufacturing. American Society of Mechanical Engineers (ASME), V001T05A008. (ASME 2019 Dynamic Systems and Control Conference, DSCC 2019; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

The trajectory of psychological safety in engineering teams: A longitudinal exploration in engineering design education

Miller, S., Jablokow, K., Marhefka, J., Mohammed, S., Heininger, K. & Ritter, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

An electrokinetic PCR chip with in situ electrochemical amplicon detection for comprehensive microbiological analysis of hospital acquired infections

Liu, T., Lu, Y., Sun, Y. & Wong, P. K., Jan 1 2018, 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018. Chemical and Biological Microsystems Society, p. 63-65 3 p. (22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An electrothermal bioprocessor with centimeter-scale fluid motion for acute bacterial infection diagnostics in resource-limited settings

Lu, Y., Torab, P. & Wong, P. K., Jan 1 2018, 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018. Chemical and Biological Microsystems Society, p. 1775-1777 3 p. (22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A single cell biosensor for probing bladder cancer heterogeneity

Torab, P., Yan, Y. & Wong, P. K., Jan 1 2018, 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018. Chemical and Biological Microsystems Society, p. 285-286 2 p. (22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Confidently exploring the solution space: The within-subject effects of product dissection on design variety and creative self-efficacy

Starkey, E. M., Alzayed, M. A., Hunter, S. T. & Miller, S. R., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Discriminating spatial intent from noisy joystick signals for wheelchair path planning and guidance

Wolkowicz, K. L., Leary, R. D., Moore, J. Z. & Brennan, S. N., Jan 1 2018, Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control. American Society of Mechanical Engineers (ASME), (ASME 2018 Dynamic Systems and Control Conference, DSCC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Fixated on fixation? An exploration of the benefits and deficits of design "Fixation" in engineering design

Starkey, E. M., Zeng, W. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Helping teams expand the breadth of their solution space through product dissection: A simulation based investigation

Alzayed, M. A., McComb, C., Hunter, S. T. & Miller, S. R., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

How engineering design students' creative preferences and cognitive styles impact their concept generation and screening

Heininger, K., Chen, H. E., Jablokow, K. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Human validation of computer vs human generated design sketches

Lopez, C., Miller, S. R. & Tucker, C. S., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Optimal multimodal virtual bronchoscopy for convex-probe endobronchial ultrasound

Higgins, W. E., Zang, X., Cheirsilp, R., Byrnes, P. D., Kuhlengel, T. K., Toth, J. & Bascom, R., Jan 1 2018, Medical Imaging 2018: Image-Guided Procedures, Robotic Interventions, and Modeling. Fei, B. & Webster, R. J. (eds.). SPIE, 1057618. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10576).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Sensibuildity: The design of a communication system to identify and prevent work-related injuries in the construction industry

Alzayed, M. A., Castro E Costa, E., Agarwal, P., Kakarlamudi, S., Bilen, S. G. & Miller, S. R., Jan 1 2018, 62nd Human Factors and Ergonomics Society Annual Meeting, HFES 2018. Human Factors and Ergonomics Society Inc., p. 1631-1635 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching design freedom: Exploring the effects of design for additive manufacturing education on the cognitive components of students’ creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

The earlier the better? Investigating the importance of timing on effectiveness of design for additive manufacturing education

Prabhu, R., Simpson, T. W., Miller, S. R. & Meisel, N. A., Jan 1 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Uncovering ownership bias: The influence of idea goodness and creativity on design professionals' concept selection practices

Zheng, X. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Unpacking subjective creativity ratings: Using embeddings to explain and measure idea novelty

Ahmed, F., Fuge, M., Hunter, S. & Miller, S., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

When are designers willing to take risks? How concept creativity and prototype fidelity influence perceived risk

Starkey, E. M., Menold, J. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2017

An investigation into the driving factors of creativity in design for additive manufacturing

Barclift, M., Simpson, T. W., Nusiner, M. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Asymmetric flexure hinge for compliant vibrational tissue cutting

Jones, J. A., Lee, Y. S. & Moore, J. Z., Jan 1 2017, Bio and Sustainable Manufacturing. American Society of Mechanical Engineers, (ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Can wearable sensors be used to capture engineering design team interactions? An investigation into the reliability of sociometric badges

Chen, H. E. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Does designing for additive manufacturing help us be more creative? an exploration in engineering design education

Sinha, S., Chen, H. E., Meisel, N. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Do technological advancements lead to learning enhancements? an exploration in virtual product dissection

Starkey, E. M., Spencer, C., Lesniak, K., Tucker, C. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite element analysis on stellite 17mm tube valve for pediatric ventricular assist device

Scheib, C. M., Newswanger, R. K., Beese, A. M., Bowen, T., Lewis, G., Roush, E. P., Jhun, C-S., Weiss, W. & Rosenberg, G., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Linking creativity measurements to product market favorability: A data-mining approach

Christian, E. L. B., Zheng, X. & Miller, S. R., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Measurement of syringe needle forces for a haptic robotic training device

Pepley, D., Yovanoff, M., Mirkin, K., Miller, S., Han, D. & Moore, J., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Mining for creativity: Determining the creativity of ideas through data mining techniques

Toh, C. A., Starkey, E. M., Tucker, C. S. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Personalized learning in medical education: Designing a user interface for a dynamic haptic robotic trainer for central venous catheterization

Yovanoff, M., Pepley, D., Mirkin, K., Moore, J., Han, D. & Miller, S., Jan 1 2017, Proceedings of the Human Factors and Ergonomics Society 2017 International Annual Meeting, HFES 2017. Human Factors an Ergonomics Society Inc., p. 615-619 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 2017-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Risky business: The driving factors of creative risk taking attitudes in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2016

Design of a virtual reality haptic robotic central venous catheterization training simulator

Pepley, D., Yovanoff, M., Mirkin, K., Han, D., Miller, S. & Moore, J., Jan 1 2016, 40th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Dynamic characterization of invasive leader cells during 3D collective cancer invasion

Dean, Z., Utzinger, U. & Wong, P. K., Jan 1 2016, 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016. Chemical and Biological Microsystems Society, p. 459-460 2 p. (20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

How do I choose? The influence of concept selection methods on student team decision-making

Zheng, X. & Miller, S. R., Jan 1 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Image-guided endobronchial ultrasound

Higgins, W. E., Zang, X., Cheirsilp, R., Byrnes, P., Kuhlengel, T., Bascom, R. & Toth, J., Jan 1 2016, Medical Imaging 2016: Image-Guided Procedures, Robotic Interventions, and Modeling. Webster, R. J. & Yaniv, Z. R. (eds.). SPIE, 97862G. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 9786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Intricate geometric design and manufacturing on vibration-assisted needles for medical applications

Cai, Y., Moore, J. & Lee, Y. S., Jan 1 2016, Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Let's get physical? The impact of dissection modality on engineering student design learning

Starkey, E. M., McKay, A. S., Hunter, S. T. & Miller, S. R., Jan 1 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

Needle cutting of skin simulants

Barnett, A. C., Tan, L., Barrett, J. & Moore, J. Z., Jan 1 2016, Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

On-line estimation of wheelchair tire slip utilizing an instantaneous center of rotation extended kalman filter

Wolkowicz, K., Pentzer, J., Miller, C., Moore, J. Z. & Brennan, S. N., Jan 1 2016, Advances in Control Design Methods, Nonlinear and Optimal Control, Robotics, and Wind Energy Systems; Aerospace Applications; Assistive and Rehabilitation Robotics; Assistive Robotics; Battery and Oil and Gas Systems; Bioengineering Applications; Biomedical and Neural Systems Modeling, Diagnostics and Healthcare; Control and Monitoring of Vibratory Systems; Diagnostics and Detection; Energy Harvesting; Estimation and Identification; Fuel Cells/Energy Storage; Intelligent Transportation. American Society of Mechanical Engineers, (ASME 2016 Dynamic Systems and Control Conference, DSCC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

The Preferences for Creativity Scale (PCS): Identifying the underlying constructs of creative concept selection

Toh, C. A. & Miller, S. R., Jan 1 2016, 28th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations
2015

An electrokinetic microdevice for isolation and quantification of circulating cell-free DNA from physiological samples

Lamanda, A., Lu, Y., Gill, N. & Wong, P. K., Aug 5 2015, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2015. Institute of Electrical and Electronics Engineers Inc., p. 544-547 4 p. 7180981. (2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Diagnosis of edema and inflammation in human intestines using ultrawideband radar

Smith, S., Narayanan, R. M. & Messaris, E., Jan 1 2015, Radar Sensor Technology XIX; and Active and Passive Signatures VI. Doerry, A., Hawley, C. T., Gilbreath, G. C. & Ranney, K. I. (eds.). SPIE, Vol. 9461. 946118

Research output: Chapter in Book/Report/Conference proceedingConference contribution