• 500 University Dr.

    17033 Hershey

    United States

Research Output 1975 2020

Filter
Conference contribution
Conference contribution
3 Citations (Scopus)

3D endobronchial ultrasound reconstruction and analysis for multimodal image-guided bronchoscopy

Zang, X., Bascom, R., Gilbert, C. R., Toth, J. & Higgins, W. E., Jan 1 2014, Medical Imaging 2014: Ultrasonic Imaging and Tomography. SPIE, 90400X. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 9040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multidetector computed tomography
Bronchoscopy
Ultrasonics
Tomography
tomography

A comparison of thrombus susceptibility for two pulsatile 50 CC left ventricular assist pumps

Navitsky, M. A., Deutsch, S. & Manning, K. B., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 69-70 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pumps
1 Citation (Scopus)

A comprehensive flow study of the 12 cc Penn State pulsatile pediatric ventricular assist device

Roszelle, B. N., Deutsch, S. & Manning, K. B., Dec 1 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART B ed. p. 1037-1038 2 p. (Proceedings of the ASME Summer Bioengineering Conference, SBC2008; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Heart-Assist Devices

A correlative study of fluid mechanics and evidence of thrombus formation within the penn state 50 cc left ventricular assist device

Topper, S. R., Navitsky, M. A., Siedlecki, C. A., Deutsch, S., Rosenberg, G. & Manning, K. B., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 783-784 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Fluid mechanics

A Fabry-Pérot pressure sensor fabricated on left ventricular assist device for heart failure implant

Zhou, M. D., Yang, C., Liu, Z., Cysyk, J. & Zheng, S., 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11. p. 1232-1235 4 p. 5969401

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Pressure sensors
Blood pressure
Diaphragms
Interferometers

A fluid dynamics study focusing on wall shear rates within the Penn State 12 CC pulsatile pediatric ventricular assist device: A comparison of mechanical heart valve types

Cooper, B. T., Roszelle, B. N., Long, T. C., Deutsch, S. & Manning, K. B., Dec 1 2007, Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007. p. 679-680 2 p. (Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Fluid dynamics
Washing
Shear deformation
Rotational flow

AFM investigation of molecular level events at biomaterial-biological interface

Agnihotri, A. & Siedlecki, C., 2002, Bioengineering, Proceedings of the Northeast Conference. Moxon, K., Sherif, D. E. & Kanakasabai, S. (eds.). p. 125-126 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatible Materials
Biomaterials
Atomic force microscopy
Graphite
Urethane

AFM investigation of molecular level events at biomaterial-biological interface

Agnihotri, A. & Siedlecki, C., Jan 1 2002, Proceedings of the IEEE 28th Annual Northeast Bioengineering Conference, NEBC 2002. El-Sherif, D., Moxon, K. & Kanakasabai, S. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 125-126 2 p. 999497. (Proceedings of the IEEE Annual Northeast Bioengineering Conference, NEBEC; vol. 2002-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatible Materials
Biomaterials
Atomic force microscopy
Graphite
Urethane

AFM techniques to measure protein adsorption and activity on biomaterial surfaces

Xu, L., Soman, P., Weksler, J., Padsalgikar, A., Runt, J. P. & Siedlecki, C., Dec 1 2008, 8th World Biomaterials Congress 2008. 1 p. (8th World Biomaterials Congress 2008; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatible Materials
Biomaterials
Proteins
Adsorption
15 Citations (Scopus)

A haptic surgical simulator for laparoscopic cholecystectomy using real-time deformable organs

Webster, R., Haluck, R., Zoppetti, G., Benson, A., Boyd, J., Charles, N., Reeser, J. & Sampson, S., Dec 1 2003, Proceedings of the IASTED International Conference on Biomedical Engineering. Hamza, M. H. (ed.). p. 219-222 4 p. (Proceedings of the IASTED International Conference on Biomedical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ducts
Simulators
Laparoscopy
Stretching
Differential equations
11 Citations (Scopus)

Algorithm-based decision rules to safely reduce laboratory test ordering

Schubart, J. R., Fowler, C. E., Donowitz, G. R. & Connors, A. F., Jan 1 2001, MEDINFO 2001 - Proceedings of the 10th World Congress on Medical Informatics. IOS Press, p. 523-527 5 p. (Studies in Health Technology and Informatics; vol. 84).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hospitalization
Potassium
Testing
Length of Stay
Quality of Health Care
1 Citation (Scopus)

An electrokinetic microdevice for isolation and quantification of circulating cell-free DNA from physiological samples

Lamanda, A., Lu, Y., Gill, N. & Wong, P. K., Aug 5 2015, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2015. Institute of Electrical and Electronics Engineers Inc., p. 544-547 4 p. 7180981. (2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electrokinetics
isolation
DNA
deoxyribonucleic acid
cells
1 Citation (Scopus)

An investigation into the driving factors of creativity in design for additive manufacturing

Barclift, M., Simpson, T. W., Nusiner, M. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Manufacturing
Students
Engineering
Sketching
1 Citation (Scopus)

A novel approach to the correlation of fluid dynamics and thromboembolism associated with cardiovascular prosthetic devices

Cooper, B. T., Long, G. D., Knight, L. C. & Manning, K. B., Dec 1 2009, World Congress on Medical Physics and Biomedical Engineering: Image Processing, Biosignal Processing, Modelling and Simulation, Biomechanics. 4 ed. p. 1396-1399 4 p. (IFMBE Proceedings; vol. 25, no. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluid dynamics
Prosthetics
Reynolds number
Computational fluid dynamics
Blood
2 Citations (Scopus)

A novel method for providing global assessments of design concepts using single-word adjectives and semantic similarity

Gosnell, C. A. & Miller, S. R., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Semantic Similarity
Semantics
Evaluate
Engineering Design
Gold

A particle image velocimetry study of the penn state 50CC left ventricular assist device: The impact of varying heart rate

Navitsky, M. A., Nanna, J. C., Topper, S. R., Deutsch, S. & Manning, K. B., Dec 1 2011, ASME 2011 Summer Bioengineering Conference, SBC 2011. PARTS A AND B ed. p. 295-296 2 p. (ASME 2011 Summer Bioengineering Conference, SBC 2011; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Velocity measurement
43 Citations (Scopus)

A prototype haptic suturing simulator

Webster, R. W., Zimmerman, D. I., Mohler, B. J., Melkonian, M. G. & Haluck, R. S., Jan 1 2001, Medicine Meets Virtual Reality 2001 - Outer Space, Inner Space, Virtual Space. IOS Press, p. 567-569 3 p. (Studies in Health Technology and Informatics; vol. 81).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Simulators
Sutures
Skin
Tissue

Asymmetric flexure hinge for compliant vibrational tissue cutting

Jones, J. A., Lee, Y. S. & Moore, J. Z., Jan 1 2017, Bio and Sustainable Manufacturing. American Society of Mechanical Engineers, (ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hinges
Tissue
Vibrations (mechanical)
Ultrasonics
Stiffness
29 Citations (Scopus)

A virtual reality surgical trainer for navigation in laparoscopic surgery

Haluck, R. S., Webster, R. W., Snyder, A. J., Melkonian, M. G., Mohler, B. J., Dise, M. L. & Lefever, A., Jan 1 2001, Medicine Meets Virtual Reality 2001 - Outer Space, Inner Space, Virtual Space. IOS Press, p. 171-176 6 p. (Studies in Health Technology and Informatics; vol. 81).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laparoscopy
Surgery
Virtual reality
Navigation
Laparoscopes
2 Citations (Scopus)

Biological fluid separation in microfluidic channels using flow rate control

Yang, S., Undar, A. & Zahn, J. D., Dec 1 2005, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. Vol. 261 FED. p. 283-289 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Channel flow
Microfluidics
Blood
Flow rate
Fluids
23 Citations (Scopus)

Blade oblique cutting of tissue for investigation of biopsy needle insertion

Moore, J. Z., McGill, C. S., Shih, A. J., McLaughlin, P. W., Zhang, Q. & Zheng, H., Nov 24 2009, Transactions of the North American Manufacturing Research Institution of SME - 37th Annual North American Manufacturing Research Conference, NAMRC 37. Vol. 37. p. 49-56 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biopsy
Needles
Tissue
Cutting tools
Liver
1 Citation (Scopus)

Blood viscoelasticity changes in cardiac surgery

Thurston, G. B., Henderson, N., Undar, A. & Calhoon, J. H., 1998, Southern Biomedical Engineering Conference - Proceedings. IEEE, p. 103 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Viscoelasticity
Surgery
Blood
Capillary tubes
Elasticity

But will it print? Assessing student use of design for additive manufacturing and exploring its effect on design performance and manufacturability

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Manufacturing
Students
Design
2 Citations (Scopus)

Can wearable sensors be used to capture engineering design team interactions? An investigation into the reliability of sociometric badges

Chen, H. E. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering Design
Sensor
Interaction
Team Work
Wearable sensors
1 Citation (Scopus)

Characterizing radii on the tips of biopsy needles

Gleason, M. A., Brown, C. A., Moore, J. Z. & Shih, A. J., Dec 1 2011, Proceedings - ASPE 2011 Spring Topical Meeting: Structured and Freeform Surfaces. 1 p. (Proceedings - ASPE 2011 Spring Topical Meeting: Structured and Freeform Surfaces; vol. 51).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biopsy
Needles

Complex solutions for complex problems? Exploring the effects of task complexity on student use of design for additive manufacturing and creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Manufacturing
Students
Self-efficacy
Education

Confidently exploring the solution space: The within-subject effects of product dissection on design variety and creative self-efficacy

Starkey, E. M., Alzayed, M. A., Hunter, S. T. & Miller, S. R., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Self-efficacy
Dissection
Students
Embodiment
Engineering Design

Continuous particle cross over in microfluidic channels for continuous biosensing

Yang, S., Undar, A. & Zahn, J. D., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gaussian distribution
Flow structure
Microfluidics
Pixels
Fluids

Correlating leaflet design and closing dynamics with turbulent flows near bileaflet mechanical heart valves

Herbertson, L. H., Deutsch, S. & Manning, K. B., Dec 1 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART B ed. p. 1091-1092 2 p. (Proceedings of the ASME Summer Bioengineering Conference, SBC2008; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heart Valves
Turbulent flow

Data integration in multi-dimensional data sets: Informational asymmetry in the valid correlation of subdivided samples

Zeng, Q. T., Pratt, J. P., Pak, J., Kim, E. Y., Ravnic, D., Huss, H. & Mentzer, S. J., 2006, Biological and Medical Data Analysis - 7th International Symposium, ISBMDA 2006, Proceedings. Vol. 4345 LNBI. p. 423-432 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multidimensional Data
Data integration
Data Integration
Asymmetry
Flow cytometry
28 Citations (Scopus)

Defining the role of haptic feedback in minimally invasive surgery

Bholat, O. S., Haluck, R., Kutz, R. H., Gorman, P. J. & Krummel, T. M., Jan 1 1999, Medicine Meets Virtual Reality - The Convergence of Physical and Informational Technologies: Options for a New Era in Healthcare. IOS Press, p. 62-66 5 p. (Studies in Health Technology and Informatics; vol. 62).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Minimally Invasive Surgical Procedures
Palpation
Surgery
Feedback
Aptitude

Design and in vivo testing of a permanent implantable left ventricular assist device

Rosenberg, G., Weiss, W., Snyder, A. J. & Pierce, W. S., Dec 1 1992, 1992 Advances in Bioengineering. Publ by ASME, p. 501-504 4 p. (American Society of Mechanical Engineers, Bioengineering Division (Publication) BED; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Cams
Telemetering
Testing
Electric motors
5 Citations (Scopus)

Designing public safety mobile applications for disconnected, interrupted, and low bandwidth communication environments

Erickson, P., Weinert, A., Breimyer, P., Samperi, M., Huff, J., Parra, C. & Miller, S. R., Dec 1 2013, 2013 IEEE International Conference on Technologies for Homeland Security, HST 2013. p. 790-796 7 p. 6699028. (2013 IEEE International Conference on Technologies for Homeland Security, HST 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

incident
communication
personnel
user interface
Homelands
3 Citations (Scopus)

Design of a virtual reality haptic robotic central venous catheterization training simulator

Pepley, D., Yovanoff, M., Mirkin, K., Han, D., Miller, S. & Moore, J., Jan 1 2016, 40th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Haptics
Virtual Reality
Virtual reality
Robotics
Robotic arms

Design philosophy of Penn State cardiovascular devices

Rosenberg, G., 1994, Advances in Bioengineering. ASME, Vol. 28. p. 27-28 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Artificial heart
Left ventricular assist devices

Detection of simulated microemboli using a diffraction grating ultrasound probe and spectral energy criteria

Ballakur, S. G., Blebea, J., Hazard, S. W., Zickler, R. & Weiss, W., Jan 1 2002, Proceedings of the IEEE 28th Annual Northeast Bioengineering Conference, NEBC 2002. El-Sherif, D., Moxon, K. & Kanakasabai, S. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 163-164 2 p. 999516. (Proceedings of the IEEE Annual Northeast Bioengineering Conference, NEBEC; vol. 2002-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffraction gratings
Signal processing
Ultrasonics

Detection of simulated microemboli using a diffraction grating ultrasound probe and spectral energy criteria

Ballakur, S. G., Blebea, J., Hazard, S. W., Zickler, R. & Weiss, W., 2002, Bioengineering, Proceedings of the Northeast Conference. Moxon, K., Sherif, D. E. & Kanakasabai, S. (eds.). p. 163-164 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffraction gratings
Linear regression
Ultrasonics
1 Citation (Scopus)

DEVELOPMENT AND VERIFICATION OF EVAD/MOCK LOOP SYSTEM MODEL.

Fikse, T. H., Rosenberg, G., Snyder, A. J., Landis, D. L., Hanson, K. L., Kern, S. E., Geselowitz, D. B. & Pierce, W. S., 1984, IEEE/Engineering in Medicine and Biology Society Annual Conference. Semmlow, J. L. & Welkowitz, W. (eds.). IEEE, p. 33-37 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric motors
Mechanical drives
Blood
Hydraulics
Pumps

Development of a wavelet analytical tool for isolating and evaluating cavitation-induced hemolysis generated during mechanical heart valve closure

Herbertson, L. H., Deutsch, S. & Manning, K. B., Dec 1 2007, Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007. p. 139-140 2 p. (Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Hydrophones
Wavelet analysis
Blood
Acoustics
1 Citation (Scopus)

Device specific aortic outflow cannula jets studied using 2D PIV and high-performance 3D CFD simulation

Menon, P. G., Teslovich, N., Chen, C. Y., Sotiropoulos, F., Undar, A. & Pekkan, K., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 67-68 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational fluid dynamics
Acrylonitrile
Pediatrics
Styrene
Butadiene

Diagnosis of edema and inflammation in human intestines using ultrawideband radar

Smith, S., Narayanan, R. M. & Messaris, E., Jan 1 2015, Radar Sensor Technology XIX; and Active and Passive Signatures VI. Doerry, A., Hawley, C. T., Gilbreath, G. C. & Ranney, K. I. (eds.). SPIE, Vol. 9461. 946118

Research output: Chapter in Book/Report/Conference proceedingConference contribution

edema
intestines
Inflammation
Ultra-wideband (UWB)
Radar
3 Citations (Scopus)

Discriminating spatial intent from noisy joystick signals for wheelchair path planning and guidance

Wolkowicz, K. L., Leary, R. D., Moore, J. Z. & Brennan, S. N., Jan 1 2018, Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control. American Society of Mechanical Engineers (ASME), (ASME 2018 Dynamic Systems and Control Conference, DSCC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wheelchairs
Motion planning
Position measurement
Trajectories
Patient monitoring
3 Citations (Scopus)

Does designing for additive manufacturing help us be more creative? an exploration in engineering design education

Sinha, S., Chen, H. E., Meisel, N. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Engineering Design
Manufacturing
Education
Industrial engineering

Do students want to dissect? A survey of student opinions on the use of product dissection in the classroom

Riegel, C., Starkey, E. M., Hunter, S. T. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissect
Dissection
Students
Module
Content Analysis

Do technological advancements lead to learning enhancements? an exploration in virtual product dissection

Starkey, E. M., Spencer, C., Lesniak, K., Tucker, C. S. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissection
Student Learning
Enhancement
Students
Engineering
1 Citation (Scopus)

DRIVE SYSTEM TO POWER PNEUMATIC BLOOD PUMPS.

Waldhausen, G., Weiss, W., Rosenberg, G., Landis, D., Cleary, T. & Pierce, W. S., 1986, Unknown Host Publication Title. ASME, p. 174-175 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pneumatics
Blood
Pumps
Artificial heart
Control systems

Dynamic characterization of invasive leader cells during 3D collective cancer invasion

Dean, Z., Utzinger, U. & Wong, P. K., Jan 1 2016, 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016. Chemical and Biological Microsystems Society, p. 459-460 2 p. (20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gene expression
Assays
Microscopic examination
Genes

Effective production of FXIIa and thrombin by model biomaterials

Bussard, K. M., Vogler, E. A. & Siedlecki, C., Jan 1 2002, Proceedings of the IEEE 28th Annual Northeast Bioengineering Conference, NEBC 2002. El-Sherif, D., Moxon, K. & Kanakasabai, S. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 129-130 2 p. 999499. (Proceedings of the IEEE Annual Northeast Bioengineering Conference, NEBEC; vol. 2002-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatible Materials
Biomaterials
Thrombin
Chemical activation
Coagulation
1 Citation (Scopus)

Effects of over-the-counter medication product family packaging design on knowledge acquisition and consumer preferences

Cho, J., Miller, S. R., Simpson, T. W. & Shooter, S. B., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Product Family
Knowledge Acquisition
Knowledge acquisition
Packaging
Drugs
14 Citations (Scopus)

Elastically deformable 3D organs for haptic surgical simulation

Webster, R., Haluck, R., Ravenscroft, R., Mohler, B., Crouthamel, E., Frack, T., Terlecki, S. & Sheaffer, J., Jan 1 2002, Medicine Meets Virtual Reality 02/10 - Digital Upgrades: Applying Moore's Law to Health. IOS Press, p. 570-572 3 p. (Studies in Health Technology and Informatics; vol. 85).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Differential equations
Simulators