• 500 University Dr.

    17033 Hershey

    United States

Research Output 1975 2020

Filter
Conference contribution
2015
9 Citations (Scopus)

My idea is best! ownership bias and its influence on engineering concept selection

Toh, C. A., Patel, A. H., Strohmetz, A. A. & Miller, S. R., Jan 1 2015, 27th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering
Engineering Design
Filtering
Attribute
Engineering Education
3 Citations (Scopus)

Needle insertion force model for haptic simulation

Gordon, A., Barnett, A. C., Kim, I. & Moore, J. Z., Jan 1 2015, Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tissue
Parameter estimation
Materials properties
Mathematical models

Stochastic event detection in needle-tissue interaction

Kim, I., Gordon, A. & Miller, S. R., Jan 1 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Event Detection
Needles
Tissue
Interaction
Probability Distribution
1 Citation (Scopus)

Vibration needle tissue cutting with varying tip geometry

Barnett, A. C., Feidner, M. & Moore, J. Z., Jan 1 2015, Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tissue
Geometry
Oncology
Biopsy
6 Citations (Scopus)

Which one should I pick? Concept selection in engineering design industry

Toh, C. A., Miele, L. M. & Miller, S. R., Jan 1 2015, 27th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering Design
Industry
Conceptual design
Conceptual Design
Voids
2014
3 Citations (Scopus)

3D endobronchial ultrasound reconstruction and analysis for multimodal image-guided bronchoscopy

Zang, X., Bascom, R., Gilbert, C. R., Toth, J. & Higgins, W. E., Jan 1 2014, Medical Imaging 2014: Ultrasonic Imaging and Tomography. SPIE, 90400X. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 9040).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multidetector computed tomography
Bronchoscopy
Ultrasonics
Tomography
tomography
2 Citations (Scopus)

A novel method for providing global assessments of design concepts using single-word adjectives and semantic similarity

Gosnell, C. A. & Miller, S. R., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Semantic Similarity
Semantics
Evaluate
Engineering Design
Gold
1 Citation (Scopus)

Effects of over-the-counter medication product family packaging design on knowledge acquisition and consumer preferences

Cho, J., Miller, S. R., Simpson, T. W. & Shooter, S. B., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Product Family
Knowledge Acquisition
Knowledge acquisition
Packaging
Drugs
4 Citations (Scopus)

Medical radar considerations for detecting and monitoring Crohn's disease

Smith, S., Narayanan, R. M. & Messaris, E., Jan 1 2014, Radar Sensor Technology XVIII. SPIE, Vol. 9077. 90770W

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Radar
radar
Monitoring
Radar Cross Section
intestines
2 Citations (Scopus)

Motion analysis as an evaluation framework for eye-hand coordination: A case study in ultrasound-guided catheter insertion

Kim, I., Miller, S. R. & Freivalds, A., Jan 1 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Goggles
Motion Analysis
Catheters
Ultrasound
Insertion

Robotic rehabilitation device and patient orientation estimation

Homich, A. J., Doerzbacher, M. A., Piazza, S. J., Hills, E. C. & Moore, J. Z., Jan 1 2014, 38th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rehabilitation
Patient rehabilitation
Robotics
Filter
Gyroscopes
7 Citations (Scopus)

Searching for inspiration: An in-depth look at designers example finding practices

Miller, S. R. & Bailey, B. P., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fixation
Design Process
User Behavior
Retrieval
Design
4 Citations (Scopus)

The impact of virtual dissection on engineering student learning and self-efficacy

Toh, C. A., Disco, C. S. & Miller, S. R., Jan 1 2014, 16th International Conference on Advanced Vehicle Technologies; 11th International Conference on Design Education; 7th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Self-efficacy
Dissection
Student Learning
Students
Engineering
12 Citations (Scopus)

The role of individual risk attitudes on the selection of creative concepts in engineering design

Toh, C. A. & Miller, S. R., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering Design
Filtering
Students
Risk Aversion
Concepts
1 Citation (Scopus)

Using learning curves to assess resident surgical skill acquisition: A case study of ultrasound-guided catheter insertion

Kim, I., Miller, S. R. & Freivalds, A., Jan 1 2014, 2014 International Annual Meeting of the Human Factors and Ergonomics Society, HFES 2014. Human Factors an Ergonomics Society Inc., p. 2350-2354 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 2014-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Catheters
Ultrasonics
resident
learning
performance
7 Citations (Scopus)

Vibrating needle cutting force

Barnett, A. C., Wolkowicz, K. & Moore, J. Z., Jan 1 2014, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), Vol. 2. V002T02A025

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Oncology
Biopsy
Skin
Blood
2013
5 Citations (Scopus)

Designing public safety mobile applications for disconnected, interrupted, and low bandwidth communication environments

Erickson, P., Weinert, A., Breimyer, P., Samperi, M., Huff, J., Parra, C. & Miller, S. R., Dec 1 2013, 2013 IEEE International Conference on Technologies for Homeland Security, HST 2013. p. 790-796 7 p. 6699028. (2013 IEEE International Conference on Technologies for Homeland Security, HST 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

incident
communication
personnel
user interface
Homelands
8 Citations (Scopus)

Exploring the utility of product dissection for early-phase idea generation

Toh, C. A. & Miller, S. R., Jan 1 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T06A034. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissection
Qualitative Analysis
Engineering Design
Analysis of variance (ANOVA)
Design Process

Geometric and analytical modeling of long flexible needle insertion on deformable bio-tissues for biomedical applications

Xiaofeng, Q., Moore, J. Z. & Lee, Y. S., Jan 1 2013, 43rd International Conference on Computers and Industrial Engineering 2013, CIE 2013. Curran Associates Inc., p. 1274-1288 15 p. (Proceedings of International Conference on Computers and Industrial Engineering, CIE; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tissue
Buckling
Oncology
Drug delivery
2 Citations (Scopus)

Investigation of friction in needle to soft tissue interaction

Abdullah, A. M., Barnett, A., Moore, J. Z. & Wolfe, D. E., Dec 1 2013, 41st North American Manufacturing Research Conference 2013 - Transactions of the North American Manufacturing Research Institution of SME, NAMRC 2013. p. 30-36 7 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 41).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tissue
Friction
Surface roughness
Coatings

Novel instant vacuum needle biopsy system

Barnett, A., McLaughlin, P. W., Zheng, H. & Moore, J. Z., Jan 1 2013, 37th Mechanisms and Robotics Conference. American Society of Mechanical Engineers, V06AT07A010. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biopsy
Instant
Needles
Vacuum
Insertion
3 Citations (Scopus)

Tesla-based blood pump and its applications

Jhun, C-S., Newswanger, R., Cysyk, J., Lukic, B., Weiss, W. & Rosenberg, G., 2013, ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation, FMD 2013. American Society of Mechanical Engineers, FMD2013-16162

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pump
Blood
Pumps

Tissue cutting mechanics and applications for needle core biopsy and guidance

Wang, Y., Tai, B. L., Chen, R. K., Moore, J. Z., Mcgill, C. S., Xu, K., Mclaughlin, P. W. & Shih, A. J., Mar 11 2013, Micro Manufacturing Techniques and Applications. p. 13-22 10 p. (Applied Mechanics and Materials; vol. 289).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biopsy
Needles
Mechanics
Tissue
Geometry

Vibration tissue cutting for blunt hollow needles

Barnett, A., Abdullah, A., Gordon, A., Moore, J. Z. & Lee, Y. S., 2013, 41st North American Manufacturing Research Conference 2013 - Transactions of the North American Manufacturing Research Institution of SME, NAMRC 2013. Vol. 41. p. 21-29 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tissue
Cutting tools
Health care
Skin
10 Citations (Scopus)

Visual inspection or product dissection? The impact of designer-product interactions on engineering design creativity

Toh, C. A. & Miller, S. R., Jan 1 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T06A011. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissection
Engineering Design
Inspection
Interaction
Dissect
2012

A comparison of thrombus susceptibility for two pulsatile 50 CC left ventricular assist pumps

Navitsky, M. A., Deutsch, S. & Manning, K. B., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 69-70 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pumps

A correlative study of fluid mechanics and evidence of thrombus formation within the penn state 50 cc left ventricular assist device

Topper, S. R., Navitsky, M. A., Siedlecki, C. A., Deutsch, S., Rosenberg, G. & Manning, K. B., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 783-784 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Fluid mechanics
1 Citation (Scopus)

Device specific aortic outflow cannula jets studied using 2D PIV and high-performance 3D CFD simulation

Menon, P. G., Teslovich, N., Chen, C. Y., Sotiropoulos, F., Undar, A. & Pekkan, K., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 67-68 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational fluid dynamics
Acrylonitrile
Pediatrics
Styrene
Butadiene

Experimental and computational studies of a formed thrombus within a backward-facing step geometry

Taylor, J. O., Witmer, K. P., Neuberger, T., Craven, B. A., Meyer, R. S., Deutsch, S. & Manning, K. B., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 1315-1316 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geometry
1 Citation (Scopus)

Measurement of time-dependent functional activity of adsorbed fibrinogen and platelet adhesion on material surfaces

Xu, L., Soman, P., Scheetz, B. M. & Siedlecki, C., Dec 12 2012, Proteins at Interfaces III State of the Art. American Chemical Society, p. 373-394 22 p. (ACS Symposium Series; vol. 1120).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Platelets
Fibrinogen
Adhesion
Epitopes
Biocompatible Materials
15 Citations (Scopus)

The impact of product dissection activities on the novelty of design outcomes

Toh, C. A., Miller, S. R. & Kremer, G. E. O., Dec 1 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. p. 615-624 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissection
Engineering Design
Pedagogy
Design
Experimentation

Towards the development of an objective assessment technique for use in engineering design education

Miller, S. R., Bailey, B. P. & Kirlik, A., Jan 1 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Education
Students
Engineering education
Experiments
2011

A Fabry-Pérot pressure sensor fabricated on left ventricular assist device for heart failure implant

Zhou, M. D., Yang, C., Liu, Z., Cysyk, J. & Zheng, S., 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11. p. 1232-1235 4 p. 5969401

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Pressure sensors
Blood pressure
Diaphragms
Interferometers

A particle image velocimetry study of the penn state 50CC left ventricular assist device: The impact of varying heart rate

Navitsky, M. A., Nanna, J. C., Topper, S. R., Deutsch, S. & Manning, K. B., Dec 1 2011, ASME 2011 Summer Bioengineering Conference, SBC 2011. PARTS A AND B ed. p. 295-296 2 p. (ASME 2011 Summer Bioengineering Conference, SBC 2011; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Velocity measurement
1 Citation (Scopus)

Characterizing radii on the tips of biopsy needles

Gleason, M. A., Brown, C. A., Moore, J. Z. & Shih, A. J., Dec 1 2011, Proceedings - ASPE 2011 Spring Topical Meeting: Structured and Freeform Surfaces. 1 p. (Proceedings - ASPE 2011 Spring Topical Meeting: Structured and Freeform Surfaces; vol. 51).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biopsy
Needles
4 Citations (Scopus)

Microfiltration device for continuous, label-free bacteria separation from whole blood for sepsis treatment

Aran, K., Morales, M., Sasso, L. A., Lo, J., Zheng, M., Johnston, I., Kamdar, N., Ündar, A. & Zahn, J. D., Dec 1 2011, 15th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2011, MicroTAS 2011. p. 497-499 3 p. (15th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2011, MicroTAS 2011; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microfiltration
Labels
Bacteria
Blood
Membranes

Multi-laboratory uncertainty analysis of PIV-measured flow quantities relevant to blood damage in the FDA nozzle model

Hariharan, P., Giarra, M., Reddy, V., Day, S. W., Manning, K. B., Deutsch, S., Myers, M. R., Stewart, S. F. C., Burgreen, G. W., Paterson, E. G. & Malinauskas, R. A., Dec 1 2011, ASME 2011 Summer Bioengineering Conference, SBC 2011. PARTS A AND B ed. p. 301-302 2 p. (ASME 2011 Summer Bioengineering Conference, SBC 2011; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Uncertainty analysis
Nozzles
Blood
2010

Experime ntal wall shear estimation as a means of predicting thrombus formation within a 50cc PENN state blood pump

Nanna, J. C., Topper, S. R., Yang, N., Roszelle, B. N., Deutsch, S. & Manning, K. B., Dec 1 2010, ASME 2010 Summer Bioengineering Conference, SBC 2010. PARTS A AND B ed. p. 127-128 2 p. (ASME 2010 Summer Bioengineering Conference, SBC 2010; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shear walls
Blood
Pumps

In vitro viscoelastic flow measurements of a pediatric end-to-side anastomosis to the 12CC penn state ventricular assist device

Perone, M. V., Yang, N., Roszelle, B. N., Deutsch, S. & Manning, K. B., Dec 1 2010, ASME 2010 Summer Bioengineering Conference, SBC 2010. PARTS A AND B ed. p. 625-626 2 p. (ASME 2010 Summer Bioengineering Conference, SBC 2010; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Flow measurement

Particle image velocimetry flow measurements about a vena cava filter

Navitsky, M. A., Nanna, J. C., Pearson, J. J., Scanlon, M. P., Lynch, F., Shontz, S. M. & Manning, K. B., Dec 1 2010, ASME 2010 Summer Bioengineering Conference, SBC 2010. PARTS A AND B ed. p. 671-672 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow measurement
Velocity measurement

The challenges of developing a pediatric ventricular assist device from a fluid dynamics perspective

Roszelle, B. N., Cooper, B. T., Yang, N., Deutsch, S. & Manning, K. B., Dec 1 2010, ASME 2010 Summer Bioengineering Conference, SBC 2010. PARTS A AND B ed. p. 241-242 2 p. (ASME 2010 Summer Bioengineering Conference, SBC 2010; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Fluid dynamics

Thrombus prediction in adult and pediatric pulsatile ventricular assist devices: The role of experimental fluid dynamics

Nanna, J. C., Roszelle, B. N., Cooper, B. T., Yang, N., Reddy, V., Deutsch, S. & Manning, K. B., Jun 8 2010, Proceedings of the 2010 IEEE 36th Annual Northeast Bioengineering Conference, NEBEC 2010. 5458129. (Proceedings of the 2010 IEEE 36th Annual Northeast Bioengineering Conference, NEBEC 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Shear walls
Fluid dynamics
Animals
Velocity measurement
9 Citations (Scopus)

Tissue oblique cutting flow angle and needle insertion contact length

Moore, J. Z. & Shin, A. J., Nov 16 2010, Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME. p. 711-718 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 38).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tissue
Biopsy
Liver
Gels
2009
1 Citation (Scopus)

A comprehensive flow study of the 12 cc Penn State pulsatile pediatric ventricular assist device

Roszelle, B. N., Deutsch, S. & Manning, K. B., Dec 1 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART B ed. p. 1037-1038 2 p. (Proceedings of the ASME Summer Bioengineering Conference, SBC2008; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Heart-Assist Devices
1 Citation (Scopus)

A novel approach to the correlation of fluid dynamics and thromboembolism associated with cardiovascular prosthetic devices

Cooper, B. T., Long, G. D., Knight, L. C. & Manning, K. B., Dec 1 2009, World Congress on Medical Physics and Biomedical Engineering: Image Processing, Biosignal Processing, Modelling and Simulation, Biomechanics. 4 ed. p. 1396-1399 4 p. (IFMBE Proceedings; vol. 25, no. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluid dynamics
Prosthetics
Reynolds number
Computational fluid dynamics
Blood
23 Citations (Scopus)

Blade oblique cutting of tissue for investigation of biopsy needle insertion

Moore, J. Z., McGill, C. S., Shih, A. J., McLaughlin, P. W., Zhang, Q. & Zheng, H., Nov 24 2009, Transactions of the North American Manufacturing Research Institution of SME - 37th Annual North American Manufacturing Research Conference, NAMRC 37. Vol. 37. p. 49-56 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biopsy
Needles
Tissue
Cutting tools
Liver

Correlating leaflet design and closing dynamics with turbulent flows near bileaflet mechanical heart valves

Herbertson, L. H., Deutsch, S. & Manning, K. B., Dec 1 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART B ed. p. 1091-1092 2 p. (Proceedings of the ASME Summer Bioengineering Conference, SBC2008; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heart Valves
Turbulent flow

Impact of outlet valve orientation on fluid dynamics of the 12 CC Penn State pediatric ventricular assist device

Valenti, I. E., Roszelle, B. N., Perone, M. V., Deutsch, S. & Manning, K. B., 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART A ed. p. 427-428 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pediatrics
Heart-Assist Devices
Hydrodynamics
Fluid dynamics
8 Citations (Scopus)

Micronutrient transfer: Infant absorption

Lönnerdal, B. & Kelleher, S. L., Apr 22 2009, Breast-Feeding: Early Influences on Later Health. p. 29-40 12 p. (Advances in Experimental Medicine and Biology; vol. 639).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Micronutrients
Newborn Infant
Intestinal Absorption
Human Milk
Weaning
1 Citation (Scopus)

Numerical study of blood flow at the end-to-side anastomosis of a left ventricular assist device for adult patients

Yang, N., Deutsch, S., Paterson, E. G. & Manning, K. B., Dec 1 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART B ed. p. 1039-1040 2 p. (Proceedings of the ASME Summer Bioengineering Conference, SBC2008; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Left ventricular assist devices
Heart-Assist Devices
Blood