Engineering Science and Mechanics

  • United States

Research Output 1963 2020

Filter
Conference contribution
2014
17 Citations (Scopus)

Tissue strands as "bioink" for scale-up organ printing

Yu, Y. & Ozbolat, I. T., Jan 1 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2014. Institute of Electrical and Electronics Engineers Inc., p. 1428-1431 4 p. 6943868

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Printing
Tissue
Fabrication
Bioprinting
3D printers
5 Citations (Scopus)

Towards numerical simulation of nonhomogeneous thin-film silicon solar cells

Anderson, T. H., Faryad, M., Mackay, T. G. & Lakhtakia, A., Jan 1 2014, Physics, Simulation, and Photonic Engineering of Photovoltaic Devices III. SPIE, Vol. 8981. 898115

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon solar cells
Solar Cells
Thin Films
Solar cells
Silicon

Tungsten-oxide thin films of dense, columnar, and chiral morphologies

Tolenis, T., Swiontek, S. E., Lakhtakia, A. & Drazdys, R., Jan 1 2014, Nanostructured Thin Films VII. Lakhtakia, A., Mackay, T. G. & Suzuki, M. (eds.). SPIE, 91720X. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9172).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tungsten oxides
Oxide films
Oxides
Tungsten
Thin Films

Ultrasonic guided wave transmission through a geometry transition and NDE of composite-to-adhesive bond

Ren, B. & Lissenden, III, C. J., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., p. 1165-1172 8 p. (AIP Conference Proceedings; vol. 1581 33).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

adhesives
ultrasonics
composite materials
coefficients
geometry
2013

Advanced composite materials technology for rotorcraft

Makeev, A., Bakis, C. E., Strauch, E., Chris, M., Holemans, P., Miller, G., Spencer, D. & Patz, N., Jan 1 2013, 39th European Rotorcraft Forum 2013, ERF 2013. Russian Helicopters, p. 365-375 11 p. (39th European Rotorcraft Forum 2013, ERF 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

rotary wing aircraft
Fatigue of materials
composite materials
Composite materials
prepregs
1 Citation (Scopus)

Amplitude controlled array transducers for mode selection and beam steering of guided waves in plates

Kannajosyula, H., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Review of Progress in Quantitative Nondestructive Evaluation, Volume 32. Chimenti, D. E. & Thompson, D. O. (eds.). American Institute of Physics Inc., p. 215-222 8 p. (AIP Conference Proceedings; vol. 1511).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

beam steering
transducers
apodization
phased arrays
linear arrays

AMPS-1D simulation examination of the measured performance of a PbSe QD tandem solar cell structure

Nguyen, N., Jiang, Z., Forgie, K., Nam, W. J., Xu, J. & Fonash, S. J., Jan 1 2013, 39th IEEE Photovoltaic Specialists Conference, PVSC 2013. Institute of Electrical and Electronics Engineers Inc., p. 300-302 3 p. 6744152. (Conference Record of the IEEE Photovoltaic Specialists Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Semiconductor quantum dots
Solar cells
Zinc oxide
Photocurrents
Lead

A multiscale pressure-volume model of cerebrospinal fluid dynamics: Application to hydrocephalus

Kauffman, J. & Drapaca, C. S., Dec 16 2013, ASME 2013 2nd Global Congress on NanoEngineering for Medicine and Biology, NEMB 2013. NEMB2013-93086

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrodynamics
Hydrocephalus
Cerebrospinal Fluid
Pressure
Cerebrospinal Fluid Pressure
1 Citation (Scopus)

An active add-drop filter using an ytterbium and erbium co-doped silica microsphere

Monifi, F., Ozdemir, S. & Yang, L., Dec 1 2013, 2013 IEEE Photonics Conference, IPC 2013. p. 213-214 2 p. 6656510. (2013 IEEE Photonics Conference, IPC 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ytterbium
Erbium
ytterbium
Microspheres
erbium
1 Citation (Scopus)

A new bioinspired pit texture to enhance the light-coupling efficiency of silicon solar cells

Chiadini, F., Scaglione, A., Fiumara, V. & Lakhtakia, A., Jan 1 2013, ICECom 2013 - Conference Proceedings: 21st International Conference on Applied Electromagnetics and Communications. IEEE Computer Society, 6684719. (ICECom 2013 - Conference Proceedings: 21st International Conference on Applied Electromagnetics and Communications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon solar cells
Textures
Prisms
Geometrical optics
Texturing
2 Citations (Scopus)

An immersed finite element method approach for brain biomechanics

Roy, S., Heltai, L., Drapaca, C. & Costanzo, F., Jan 1 2013, Mechanics of Biological Systems and Materials - Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics. p. 79-86 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biomechanics
Brain
Cerebrospinal fluid
Finite element method
Mechanics

A numerical averaging algorithm for rapid simulation of multiscale damage dynamics

Roy, A. & Cusumano, J. P., Jan 1 2013, 22nd Reliability, Stress Analysis, and Failure Prevention Conference; 25th Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers, (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Averaging
Damage
Simulation
Brittleness
Failure modes

A tunable add-drop filter based on active microsphere resonator

Monifi, F., Ozdemir, S. & Yang, L., Nov 19 2013, Conference on Lasers and Electro Optics, CLEO: Applications and Technology, CLEO_AT 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microspheres
Resonators
Ytterbium
resonators
Erbium

A tunable Add-Drop filter based on active microsphere resonator

Monifi, F., Ozdemir, S. & Yang, L., Jan 1 2013, 2013 Conference on Lasers and Electro-Optics, CLEO 2013. IEEE Computer Society, 6832983. (2013 Conference on Lasers and Electro-Optics, CLEO 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microspheres
Resonators
Ytterbium
Erbium
Crosstalk

Bioprinting induced cell damage in cellular micro-fluidic channel fabrication

Yu, Y. & Ozbolat, I. T., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1081. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluidics
Nozzles
Cells
Tissue
Fabrication
1 Citation (Scopus)

Cell viability characterization of bioprintable blood-vessel-like cellular channels towards 3D organ fabrication

Yu, Y. & Ozbolat, I. T., 2013, IIE Annual Conference and Expo 2013. Institute of Industrial Engineers, p. 2299-2304 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blood vessels
Fluidics
Printing
Nozzles
Cells
3 Citations (Scopus)

Characterization of compressively loaded filament wound composite cylinders using digital image correlation

Henry, T. C., Bakis, C. E., Emerson, R. P. & Riddick, J. C., Dec 1 2013, 28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013. p. 778-795 18 p. (28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fibers
Composite materials
Stiffness
Filament winding
Laminated composites

Characterization of printable micro-fluidic channels for organ printing

Zhang, Y., Yu, Y. & Ozbolat, I. T., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1024. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluidics
Microfluidics
Printing
Scaffolds
Tissue
1 Citation (Scopus)

Comparative study of nanomaterials for interlaminar reinforcement of fiber-composite panels

Chiu, K. R., Duenas, T., Dzenis, Y., Kaser, J., Bakis, C. E., Roberts, J. K. & Carter, D., Jun 4 2013, Behavior and Mechanics of Multifunctional Materials and Composites 2013. 86891D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8689).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanomaterials
fiber composites
Nanofibers
Reinforcement
reinforcement
12 Citations (Scopus)

Cumulative second harmonics in weakly nonlinear plates and shells

Liu, Y., Lissenden, C. J. & Rose, J. L., Jun 10 2013, Health Monitoring of Structural and Biological Systems 2013. 86950S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8695).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shell
Harmonic
Pipe
harmonics
Health Monitoring

Design of a fluidic flexible matrix composite damping treatment for a cantilever beam

Zhu, B., Rahn, C. D. & Bakis, C. E., Dec 1 2013, 28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013. p. 633-651 19 p. (28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cantilever beams
Fluidics
Orifices
Damping
Vibrations (mechanical)
1 Citation (Scopus)

Determination of high strain rate behavior of steel using finite element analysis and high strain rate experimentation

Schreiber, J., Eden, T. J. & Smid, I., Apr 25 2013, TMS 2013 - 142nd Annual Meeting and Exhibition, Supplemental Proceedings: Linking Science and Technology for Global Solutions. p. 1175-1181 7 p. (TMS Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
experimentation
strain rate
Strain rate
deletion

Development of a multi-ARM bioprinter for hybrid tissue engineering

Chen, H. & Ozbolat, I. T., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1025. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cartilage
Tissue engineering
Fabrication
Tissue
Printing
3 Citations (Scopus)

Effect of grating period on the excitation of multiple surface-plasmon- polariton waves guided by the interface of a metal grating and a photonic crystal

Hall, A. S., Faryad, M., Barber, G. D., Lakhtakia, A. & Mallouk, T. E., Jun 10 2013, Physics, Simulation, and Photonic Engineering of Photovoltaic Devices II. 862003. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8620).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface Plasmon Polariton
Guided Waves
Guided electromagnetic wave propagation
Photonic crystals
Photonic Crystal
2 Citations (Scopus)

Effect of localized plastic deformation on higher harmonic guided wave mode generation in plate

Liu, Y., Choi, G., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM 2013. Chang, F-K. (ed.). DEStech Publications, Vol. 2. p. 1992-1999 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Plastics
Plastic deformation
Ultrasonic waves
Finite Element Analysis
2 Citations (Scopus)

Efficiency enhancement of amorphous-silicon tandem solar cell due to multiple surface-plasmon-polariton waves

Faryad, M. & Lakhtakia, A., Jun 10 2013, Physics, Simulation, and Photonic Engineering of Photovoltaic Devices II. 862005. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8620).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface Plasmon Polariton
Amorphous Silicon
Solar Cells
Amorphous silicon
Reflectance
1 Citation (Scopus)

Electrical anisotropy of unidirectional glass fiber reinforced composites containing carbon black

Gungor, S. & Bakis, C. E., Aug 12 2013, SAMPE 2013 Conference and Exhibition: Education and Green Sky - Materials Technology for a Better World. p. 2091-2099 9 p. (International SAMPE Technical Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soot
Carbon black
Glass fibers
Anisotropy
Composite materials
2 Citations (Scopus)

Electron paramagnetic resonance as a probe of technologically relevant processing effects on CdTe solar cell materials

Pigott, M., Young, L., Lenahan, P. M., Halverson, A., Andreini, K. W. & Korevaar, B. A., Jan 1 2013, 39th IEEE Photovoltaic Specialists Conference, PVSC 2013. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 6744231. (Conference Record of the IEEE Photovoltaic Specialists Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paramagnetic resonance
Solar cells
Processing
Defects
Etching

Engineering the spectral properties of photonic molecules

Peng, B., Lei, F., Ozdemir, S., Long, G. L. & Yang, L., Jan 1 2013, 2013 Conference on Lasers and Electro-Optics, CLEO 2013. IEEE Computer Society, 6833969. (2013 Conference on Lasers and Electro-Optics, CLEO 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photonics
Resonators
Tuning
Molecules

Engineering the spectral properties of photonic molecules

Peng, B., Lei, F., Ozdemir, S., Long, G. L. & Yang, L., Nov 19 2013, Conference on Lasers and Electro Optics, CLEO: Applications and Technology, CLEO_AT 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photonics
Resonators
Tuning
engineering
photonics
2 Citations (Scopus)

Engineering the spectral properties of photonic molecules

Peng, B., Lei, F., Ozdemir, S., Long, G. L. & Yang, L., Nov 21 2013, CLEO: QELS_Fundamental Science, CLEO:QELS FS 2013. (CLEO: QELS_Fundamental Science, CLEO:QELS FS 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photonics
Resonators
Tuning
engineering
photonics

Engineering the spectral properties of photonic molecules

Peng, B., Lei, F., Ozdemir, S., Long, G. L. & Yang, L., Nov 18 2013, CLEO: Science and Innovations, CLEO_SI 2013. (CLEO: Science and Innovations, CLEO_SI 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photonics
Resonators
Tuning
engineering
photonics

Enhanced performance of symmetric double layer capacitor by flexible binder-free SWCNT membrane electrodes

Ma, D., Kalupson, J., Shetty, P., Adu, K. W. & Rajagopalan, R., Jan 1 2013, Carbon Nanomaterials. Materials Research Society, p. 63-68 6 p. (Materials Research Society Symposium Proceedings; vol. 1505).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electrochemical capacitors
Binders
capacitors
Capacitors
membranes
3 Citations (Scopus)

Estimation of internal variables from Hodgkin-Huxley neuron voltage

Sinha, A., Schiff, S. & Huebel, N., Dec 1 2013, 2013 6th International IEEE EMBS Conference on Neural Engineering, NER 2013. p. 194-197 4 p. 6695905

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Neurons
Electric potential
Potassium
Sodium
Computer simulation
13 Citations (Scopus)

Evaluating the scalability of multilayer MoS2 transistors

Das, S. & Appenzeller, J., Dec 16 2013, 71st Device Research Conference, DRC 2013 - Conference Digest. p. 153-154 2 p. 6633839

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scalability
Multilayers
Transistors
2 Citations (Scopus)

Evaluation of millimeter-size fluidic flexible matrix composite tubes

Vashisth, A., Zhu, B., Wimmer, B. M., Bakis, C. E. & Rahn, C. D., Jan 1 2013, Mechanics and Behavior of Active Materials; Structural Health Monitoring; Bioinspired Smart Materials and Systems; Energy Harvesting. American Society of Mechanical Engineers, V002T06A029. (ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluidics
Stiffness
Pressurization
Composite materials
Flow control
1 Citation (Scopus)

Fabrication and testing of artificial emerald ash borer visual decoys

Pulsifer, D. P., Lakhtakia, A., Narkhede, M. S., Domingue, M. J., Post, B. G., Kumar, J., Martín-Palma, R. J. & Baker, T. C., Jun 4 2013, Bioinspiration, Biomimetics, and Bioreplication 2013. 86860L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ashes
beryl
decoys
ashes
Fabrication
4 Citations (Scopus)

Fatigue and ratcheting experimental responses of alloy 617 under high temperature multiaxial loading

Quayyum, S., Sengupta, M., Choi, G., Lissenden, III, C. J. & Hassan, T., Dec 1 2013, ASME 2013 Pressure Vessels and Piping Conference, PVP 2013. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat exchangers
Creep
Fatigue of materials
Strain rate
Temperature

Full-field strain analysis of compressively loaded flat composite laminates containing undulated fiber architecture

Henry, T. C., Bakis, C. E., Smith, E. & Riddick, J. C., 2013, American Helicopter Society International - AHS HRC International Technical Specialists' Meeting on Rotorcraft Structures and Survivability 2013. American Helicopter Society International, p. 121-133 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laminates
Fibers
Composite materials

Functionally gradient tissue scaffold design and deposition path planning for bio-additive processes

Khoda, A. K. M., Ozbolat, I. T. & Koc, B., 2013, IIE Annual Conference and Expo 2013. Institute of Industrial Engineers, p. 2253-2262 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Porosity
Scaffolds
Fabrication
Pore size

Guided wave mode pairs for transmissibility in adhesively bonded metal plates

Puthillath, P., Ren, B., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Review of Progress in Quantitative Nondestructive Evaluation, Volume 32. Chimenti, D. E. & Thompson, D. O. (eds.). American Institute of Physics Inc., p. 199-206 8 p. (AIP Conference Proceedings; vol. 1511).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

metal plates
adhesives
waveguides
ultrasonics
evaluation
1 Citation (Scopus)

Higher harmonic guided waves in isotropic weakly non-linear elastic plates

Chillara, V. K. & Lissenden, III, C. J., Jan 1 2013, Review of Progress in Quantitative Nondestructive Evaluation, Volume 32. Chimenti, D. E. & Thompson, D. O. (eds.). American Institute of Physics Inc., p. 145-149 5 p. (AIP Conference Proceedings; vol. 1511).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

elastic plates
harmonics
wave generation
8 Citations (Scopus)

High resistivity and high TCR vanadium oxide thin films for infrared imaging prepared by bias target ion beam deposition

Jin, Y., Hitesh, A. B., Ozcelik, A., Jackson, T. N. & Horn, M. W., Sep 17 2013, Infrared Technology and Applications XXXIX. 87043C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8704).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vanadium
vanadium oxides
Infrared Imaging
Infrared imaging
Resistivity
2 Citations (Scopus)

High temperature - High energy density polymer-coated glass capacitors

Manoharan, M., Lanagan, M. T., Zhang, S., Kushner, D., Zou, C. & Murata, T., Sep 16 2013, 2013 IEEE Transportation Electrification Conference and Expo: Components, Systems, and Power Electronics - From Technology to Business and Public Policy, ITEC 2013. 6574520. (2013 IEEE Transportation Electrification Conference and Expo: Components, Systems, and Power Electronics - From Technology to Business and Public Policy, ITEC 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Capacitors
Glass
Polymers
Temperature

Improving the corrosion resistance of magnesium by vapor phase processing

Wolfe, R. C. & Shaw, B., Sep 2 2013, NACE International - Corrosion 2013 Conference and Expo. (NACE - International Corrosion Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium
Corrosion resistance
Vapors
Corrosion rate
Corrosion

Information-theoretic characterization of bifurcations in nonlinear dynamical systems with noise

Patil, N. S. & Cusumano, J. P., Jan 1 2013, 9th International Conference on Multibody Systems, Nonlinear Dynamics, and Control. American Society of Mechanical Engineers, V07BT10A035. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nonlinear dynamical systems
Nonlinear Dynamical Systems
Bifurcation
Time series
Entropy
1 Citation (Scopus)

Integration of a reliability model within a virtual analysis system for printed circuit boards

Goerdt, B. B., Dababneh, A., Marler, T., Ozbolat, I. T., Weintraub, B. & Johnson, R., Jan 1 2013, Emerging Technologies. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 11).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Printed circuit boards
Reliability analysis
Virtual reality
User interfaces
Visualization
11 Citations (Scopus)

Interface defects and negative bias temperature instabilities in 4H-SiC PMOSFETs - A combined DCIV/SDR study

Aichinger, T., Lenahan, P. M. & Peters, D., Feb 25 2013, Silicon Carbide and Related Materials 2012, ECSCRM 2012. p. 529-532 4 p. (Materials Science Forum; vol. 740-742).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon carbide
silicon carbides
Defects
defects
Magnetic resonance

Interfacial blister evolution of coated surfaces under severe thermal and pressure transients

Harris, J. T., Segall, A. E., Robinson, D. & Carter, R., Dec 1 2013, ASME 2013 Pressure Vessels and Piping Conference, PVP 2013. Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Indentation
Finite element method
Coatings
Defects
Capacitance
4 Citations (Scopus)

Irradiation testing of ultrasonic transducers

Daw, J., Tittmann, B., Reinhardt, B., Kohse, G., Ramuhalli, P., Montgomery, R., Chien, H. T., Villard, J. F., Palmer, J. & Rempe, J., Dec 1 2013, 2013 3rd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and Their Applications, ANIMMA 2013. 6728097. (2013 3rd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and Their Applications, ANIMMA 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic transducers
transducers
ultrasonics
Ultrasonics
Irradiation