• United States

Research Output

Filter
Paper
1994

Multi-objective optimization of laminated ceramic composites using genetic algorithms

Belegundu, A. D., Murthy, D. V., Salagame, R. R. & Constans, E. W., Jan 1 1994, p. 1015-1022. 8 p.

Research output: Contribution to conferencePaper

24 Scopus citations

Neural network based active vibration absorber with output feedback control

Ma, R. P. & Sinha, A., Dec 1 1994, p. 1023-1028. 6 p.

Research output: Contribution to conferencePaper

Optimization of a pin-fin sink: a design tool

Constans, E. W., Belegundu, A. D. & Kulkarni, A. K., Dec 1 1994, p. 25-32. 8 p.

Research output: Contribution to conferencePaper

10 Scopus citations

Radiatively driven hypersonic wind tunnel

Miles, R., Brown, G., Lempert, W., Natelson, D., Yetter, R., Guest, J., Williams, G. & Bogdonofff, S., Jan 1 1994.

Research output: Contribution to conferencePaper

4 Scopus citations

Shape optimization with p-adaptivity

Salagame, R. R. & Belegundu, A. D., Jan 1 1994, p. 354-362. 9 p.

Research output: Contribution to conferencePaper

3 Scopus citations
1993

Transient analysis of dissolution of a reactor bottom head into a melt pool

Tan, M. J., Cho, D. H. & Cheung, F. B., Jan 1 1993, p. 531-541. 11 p.

Research output: Contribution to conferencePaper

1992

Experimental study of the thermal erosion in a subscale solid-propellant launcher

Yeh, Y. P., Kuo, K. K., Cheung, F. B. & Litzinger, T. A., Jan 1 1992.

Research output: Contribution to conferencePaper

Navier-Stokes investigation of a transonic centrifugal compressor stage using an algebraic Reynolds stress model

Kunz, R. F. & Lakshminarayana, B., Jan 1 1992.

Research output: Contribution to conferencePaper

1991

A numerical investigation of supersonic nozzle boundary layer transition

Pauley, L. L. & Dagher, S. N., Jan 1 1991.

Research output: Contribution to conferencePaper

Experimental observation of impinging jet breakup utilizing laser-sheet illuminated photography

Kline, M. C., Woodward, R. D., Burch, R. L., Cheung, F. B. & Kuo, K. K., Jan 1 1991.

Research output: Contribution to conferencePaper

2 Scopus citations
1990

An analysis of direct solar thermal rocket propulsion

Venkateswaran, S., Merxle, C. L. & Thynell, S. T., Jan 1 1990.

Research output: Contribution to conferencePaper

Coupled modal sliding mode control of vibration in flexible structures

Kao, C. K. & Sinha, A., Jan 1 1990, p. 404-413. 10 p.

Research output: Contribution to conferencePaper

Effect of linear-anisotropic scattering on ir-signatures from cylindrical plumes

Thynell, S. T., Jan 1 1990.

Research output: Contribution to conferencePaper

Enhancement and morphometric analysis of digital images of turbulent flames

Sommer, H. J., Kao, C. C. & Turns, S. R., Jan 1 1990, p. 51-57. 7 p.

Research output: Contribution to conferencePaper

Experimental determination of the instant screw axis and angular acceleration axis

Sommer, H. J. & Buczek, F. L., Jan 1 1990, p. 141-142. 2 p.

Research output: Contribution to conferencePaper

6 Scopus citations

Numerical simulation of airflow in human bronchial passages during high-frequency ventilation

Kulkarni, A. K., Meyers, J. & McHugh, P., Jan 1 1990, p. 113-114. 2 p.

Research output: Contribution to conferencePaper

1 Scopus citations

Reconfigurable control of a power plant deaerator using learning automata

Garcia, H. E., Ray, A. & Edwards, R. M., Dec 1 1990, p. 9-15. 7 p.

Research output: Contribution to conferencePaper

1989

Decision support system for real-time control and monitoring of dynamical processes

Nann, S. R., Ray, A. & Kumara, S., Dec 1 1989, p. 361-365. 5 p.

Research output: Contribution to conferencePaper

4 Scopus citations

Effects of either CO2 or H2O and particles on radiation in a one-dimensional cylinder

Thynell, S. T., Jan 1 1989.

Research output: Contribution to conferencePaper

Multi-level hypotheses testing for fault detection in continuous processes

Ray, A., Dec 1 1989, p. 2223-2227. 5 p.

Research output: Contribution to conferencePaper

Near-minimum-time control of a flexible robot arm via linear programming

Sinha, A. & Peng, H., Dec 1 1989, p. 227-235. 9 p.

Research output: Contribution to conferencePaper

Probabilistic method to compute the optimal slip load for a mistuned bladed disk assembly with friction dampers

Chen, S. & Sinha, A., Dec 1 1989, p. 231-239. 9 p.

Research output: Contribution to conferencePaper

3 Scopus citations

Robust mechanical design through minimum sensitivity

Belegundu, A. D. & Zhang, S., Dec 1 1989, p. 233-239. 7 p.

Research output: Contribution to conferencePaper

Shape optimization of robotic manipulators for maximum stiffness and load carrying capacity

Lamancusa, J. S., Saravanos, D. A. & Sommer, H. J., Dec 1 1989, p. 191-200. 10 p.

Research output: Contribution to conferencePaper

1 Scopus citations
1988

Fluid mechanics of cavitation inception in rectangular slots

Cimbala, J. M. & Blair, W. G., Dec 1 1988, p. 84-89. 6 p.

Research output: Contribution to conferencePaper

Integrated use of microcomputers as a laboratory tool in mechanical engineering education

Trethewey, M. W., Kulakowski, B. T., Lamancusa, J. S., Sommer, H. J. & Cimbala, J. M., Dec 1 1988, p. 461-469. 9 p.

Research output: Contribution to conferencePaper

Networking for real-time flexible manufacturing systems

Ray, A., Dec 1 1988, p. 757-762. 6 p.

Research output: Contribution to conferencePaper

Observer design for compensation of network-induced delays in integrated communication and control systems

Luck, R. & Ray, A., Dec 1 1988, p. 175-182. 8 p.

Research output: Contribution to conferencePaper

1 Scopus citations

Redundancy management and failure detection of ultrasonic ranging sensors for robotic applications

Luck, R. & Ray, A., Dec 1 1988, p. 557-564. 8 p.

Research output: Contribution to conferencePaper

7 Scopus citations

Service access porcedure (SAP) for the transmission control protocol (TCP).

Ray, A. & Phoha, S., Dec 1 1988, p. 1167-1171. 5 p.

Research output: Contribution to conferencePaper

1987

COMPUTERIZED SYSTEM FOR POWER PLANT COST ESTIMATION.

Sinha, A., Adibhatla, S. & Leigh, D. C., Jan 1 1987, p. 87-94. 8 p.

Research output: Contribution to conferencePaper

1 Scopus citations

EFFECTS OF TRANSVERSE OSCILLATIONS ON NATURAL CONVECTIVE FLOW INDUCED BY COMBINED THERMAL AND MASS DIFFUSIONS IN POROUS MEDIA.

Wang, C. & Tu, C. J., Dec 1 1987, p. 325-329. 5 p.

Research output: Contribution to conferencePaper

ONSET OF CIRCULATION DUE TO BUOYANT JET IN A TWO-LAYER STRATIFIED MEDIUM.

Kulkarni, A. K. & Murphy, F., Dec 1 1987, p. 313-318. 6 p.

Research output: Contribution to conferencePaper

1 Scopus citations

OPERATION AND EVALUATION OF A NOVEL PROCESS FOR THE RECOVERY OF ENERGY FROM WOOD.

Kulkarni, A. K. & White, E. W., Jan 1 1987, p. 109-114. 6 p.

Research output: Contribution to conferencePaper

PROBABILISTIC OPTIMAL DESIGN OF STRUCTURES USING SECOND-MOMENT CRITERIA.

Belegundu, A. D. & Zhang, S., Dec 1 1987, p. 67-74. 8 p.

Research output: Contribution to conferencePaper

SHAPE OPTIMUM DESIGN OF ROBOTIC MANIPULATORS WITH STATIC PERFORMANCE CRITERIA.

Saravanos, D. A., Lamancusa, J. S. & Sommer, III, H. J., Dec 1 1987, p. 37-44. 8 p.

Research output: Contribution to conferencePaper

4 Scopus citations
1986

EXPERIMENTAL INVESTIGATION OF THE UNSTEADY FLOW DOWNSTREAM OF A TWO-DIMENSIONAL SQUARE CAVITY.

Cimbala, J. M. & Kim, N. H., Dec 1 1986, p. 37-39. 3 p.

Research output: Contribution to conferencePaper

KNOWLEDGE-BASED SYSTEM FOR CONTINUOUS SEAM WELDING IN THE AUTONOMOUS MANUFACTURING ENVIRONMENT.

Thompson, D. R., Ray, A. & Kumara, S., Dec 1 1986, p. 339-350. 12 p.

Research output: Contribution to conferencePaper

MICROBUBBLE DRAG REDUCTION.

Merkle, C. L., Deutsch, S., Pal, S., Cimbala, J. & Seelig, W., Dec 1 1986, p. 199-215. 17 p.

Research output: Contribution to conferencePaper

4 Scopus citations

MODIFICATION OF THE PEDALLING MECHANICS OF CYCLISTS.

Sanderson, D. J., Sommer, III, H. J. & Cavanagh, P. R., Dec 1 1986, p. 17-20. 4 p.

Research output: Contribution to conferencePaper

NOVEL SUBOPTIMAL CONTROLLER FOR THE PENN STATE ELECTRIC VENTRICULAR ASSIST DEVICE.

Tsach, U., Sinha, A., Gaselowitz, D. B. & Hsu, H. K., Dec 1 1986, p. 182-183. 2 p.

Research output: Contribution to conferencePaper

SUBOPTIMAL CONTROLLER FOR THE PENN STATE EVAD: THEORY AND IMPLEMENTATION.

Tsach, U., Geselowitz, D. B., Tirinato, J., Sinha, A. & Hsu, H. K., Dec 1 1986, p. 77-81. 5 p.

Research output: Contribution to conferencePaper

1985

SERVICE ACCESS PROCEDURE (SAP) IN SUPPORT OF THE WIS ARCHITECTURE.

Ray, A., Angevine, R. M. & Haughney, J. F., Dec 1 1985, p. 404-408. 5 p.

Research output: Contribution to conferencePaper

1 Scopus citations
1983

ON-LINE SIGNAL VALIDATION AND FEEDBACK CONTROL IN A NUCLEAR REACTOR.

Ray, A., Bernard, J. A. & Lanning, D. D., Dec 1 1983.

Research output: Contribution to conferencePaper

5 Scopus citations
1982

COMPUTER PROGRAM FOR DAMAGE-TOLERANT OPTIMAL DESIGN OF COMPLEX STRUCTURES.

Nguyen, D. T., Arora, J. S. & Belegundu, A. D., Dec 1 1982, p. 5-19. 15 p.

Research output: Contribution to conferencePaper

1980

TRANSIENTS IN A POWER-PLANT FEED-PUMP SYSTEM.

Ray, A., Jan 1 1980, p. 129-133. 5 p.

Research output: Contribution to conferencePaper

1979

REGRESSIVE OSTEOMETRIC SCALING APPLICATIONS TO MIRROR SYMMETRY AND STATISTICAL COORDINATE MODELS.

Sommer, III, H. J. & Miller, N. R., Jan 1 1979, p. 87-89. 3 p.

Research output: Contribution to conferencePaper

1 Scopus citations

THERMAL INTERACTIONS OF A MOLTEN CORE DEBRIS POOL WITH SURROUNDING STRUCTURAL MATERIALS.

Baker, L., Cheung, F. B., Farhadieh, R., Stein, R. P., Gabor, J. D. & Bingle, J. D., Jan 1 1979, p. 389-399. 11 p.

Research output: Contribution to conferencePaper

2 Scopus citations
1978

APPLICATION OF MATHEMATICAL MODELING TO DESIGN OF A PRACTICAL CONTROLLER FOR A COMMERCIAL SCALE FOSSIL POWER PLANT.

Ray, A. & Berkowitz, D. A., Jan 1 1978, p. 1-12. 12 p.

Research output: Contribution to conferencePaper

DYNAMIC MODELING, TESTING, AND CONTROL OF FLUIDIZED BED SYSTEMS.

Berkowitz, D. A., Ray, A., Sumaria, V. & Wilson, M., Jan 1 1978, p. 488-500. 13 p.

Research output: Contribution to conferencePaper

1 Scopus citations