• United States

Research Output 1969 2019

Filter
Conference contribution
2019

Advanced analytical tool for flexible pavement design and evaluation

Huang, H., Luo, J., Moaveni, M., Qamhia, I. I., Tutumluer, E. & Tingle, J. S., Jan 1 2019, Airfield and Highway Pavements 2019: Design, Construction, Condition Evaluation, and Management of Pavements - Selected Papers from the International Airfield and Highway Pavements Conference 2019. Al-Qadi, I. L., Ozer, H., Loizos, A. & Murrell, S. (eds.). American Society of Civil Engineers (ASCE), p. 61-71 11 p. 007. (Airfield and Highway Pavements 2019: Design, Construction, Condition Evaluation, and Management of Pavements - Selected Papers from the International Airfield and Highway Pavements Conference 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pavements
Asphalt
Engines
Soils
Finite element method

Cascaded observers for the rotor position, speed and load torque of the PMSM using an extended dynamic model

Comanescu, M., Jun 1 2019, 2019 16th Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 8771650. (2019 16th Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchronous motors
Permanent magnets
Dynamic models
Loads (forces)
Torque

Discrete Time Sliding Mode Controller and Observer Scheme for Decoupled Current Control of the Induction Motor Drive

Comanescu, M., Apr 24 2019, 2019 IEEE Power and Energy Conference at Illinois, PECI 2019. Institute of Electrical and Electronics Engineers Inc., 8698783. (2019 IEEE Power and Energy Conference at Illinois, PECI 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric current control
Induction motors
Controllers
Electric potential

Securing PKES against Relay Attacks using Coordinate Tracing and Multi-Factor Authentication

Rizvi, S. S., Imler, J., Ritchey, L. & Tokar, M., Apr 16 2019, 2019 53rd Annual Conference on Information Sciences and Systems, CISS 2019. Institute of Electrical and Electronics Engineers Inc., 8692790. (2019 53rd Annual Conference on Information Sciences and Systems, CISS 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Authentication
Bluetooth
Bearings (structural)
Sensors

Threat modeling and analysis of voice assistant applications

Cho, G., Choi, J., Kim, H., Hyun, S. & Ryoo, J., Jan 1 2019, Information Security Applications - 19th International Conference, WISA 2018, Revised Selected Papers. Kang, B. B. & Jang, J. (eds.). Springer Verlag, p. 197-209 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11402 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling
Smartphones
Voice
Intuitive
Demonstrate
2018

An Implementation and Evaluation of Progressive Authentication Using Multiple Level Pattern Locks

Aiken, W., Kim, H., Ryoo, J. & Rosson, M. B., Oct 29 2018, 2018 16th Annual Conference on Privacy, Security and Trust, PST 2018. Deng, R. H., Marsh, S., Nurse, J., Lu, R., Sezer, S., Miller, P., Chen, L., McLaughlin, K. & Ghorbani, A. (eds.). Institute of Electrical and Electronics Engineers Inc., 8514215. (2018 16th Annual Conference on Privacy, Security and Trust, PST 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Authentication
Evaluation

Architectural solutions to mitigate security vulnerabilities in software systems

Anand, P. & Ryoo, J., Aug 27 2018, ARES 2018 - 13th International Conference on Availability, Reliability and Security. Association for Computing Machinery, 3233766. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Health care
Application programs

Cloud Reliability and Independence Standard: A Three Tiered System for Optimal Cloud Storage

English, E. M., Stacey, D. P., Rizvi, S. S. & Perino, D., Jun 21 2018, Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017. Institute of Electrical and Electronics Engineers Inc., p. 69-74 6 p. (Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cloud computing
Servers
Data storage equipment
Industry

Development of a robust sliding mode observer for the rotor time constant inverse of the induction motor

Comanescu, M., Apr 27 2018, Proceedings - 2018 IEEE International Conference on Industrial Technology, ICIT 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-February. p. 377-382 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction motors
Rotors
Fluxes
Feedback
Electric potential

Digital feed-forward control of gas mixture with high-speed valve switching

Martin, C. R. & Batzel, T. D., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedforward control
Gas mixtures
Flow rate
Switching frequency
Partial pressure
1 Citation (Scopus)

Electrical signatures for chemical action at the work surface in an oxyfuel flame

Martin, C. R., Kinney, J., Matzik, A. & Molina, J., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Ions
Impurities
Salts
Copper

Evaluating ballast stabilization during initial compaction phase

Liu, S., Huang, H. & Qiu, T., Jan 1 2018, Railroad Ballast Testing and Properties. Szecsy, R., Stark, T. D. & Swan, R. H. (eds.). ASTM International, p. 105-122 18 p. (ASTM Special Technical Publication; vol. STP 1605).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rails
Compaction
Stabilization
Railroad tracks
Railroads

Evaluation of liquid propulsion system design on priming event pressure levels

Kiaoulias, D., Zvorsky, I., Ismail, S., Meyers, N., Bhalla, J. & Moore, J. D., Jan 1 2018, 2018 Joint Propulsion Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 2018-4757. (2018 Joint Propulsion Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propulsion
Systems analysis
Liquids
Monopropellants
Water hammer
1 Citation (Scopus)

IoE Security Threats and You

Ryoo, J., Kim, S., Cho, J., Kim, H., Tjoa, S. & Derobertis, C., Jun 21 2018, Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017. Institute of Electrical and Electronics Engineers Inc., p. 13-19 7 p. (Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Internet
Ecosystems
User interfaces
Marketing
Internet of things
1 Citation (Scopus)

Long-term field performance of flexible pavements using warm mix asphalt technologies

Shen, S., Zhang, W., Wu, S., Mohammad, L. & Muhunthan, B., Jan 1 2018, Asphalt Paving Technology 2018 - Journal of the Association of Asphalt Paving Technologists, AAPT 2018. McDaniel, R. S., Blankenship, P., Hand, A., Rowe, G., West, R., Braham, A., Copeland, A. & Baumgardner, G. (eds.). Association of Asphalt Paving Technologist, p. 163-198 36 p. (Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions; vol. 87).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Asphalt
Pavements
Asphalt pavements
Asphalt mixtures
Moisture

Multi-Layer Defense Model for Securing Online Financial Transactions

Gualdoni, J., Kurtz, A., Myzyri, I., Wheeler, M. & Rizvi, S. S., Jun 21 2018, Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017. Institute of Electrical and Electronics Engineers Inc., p. 75-79 5 p. (Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Purchasing
Authentication
Internet
Websites

Preventing identity theft using biometrics based authentication system

Zahrouni, L., Blackwood, D., Rizvi, S. S., Gualdoni, J. & Almiani, M., Jan 12 2018, 2017 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies, AEECT 2017. Al-Oqily, I. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. (2017 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies, AEECT 2017; vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

biometrics
Biometrics
Authentication
Application programs
Mobile devices
2 Citations (Scopus)

Securing the Internet of Things (IoT): A Security Taxonomy for IoT

Rizvi, S. S., Kurtz, A., Pfeffer, J. & Rizvi, M., Sep 5 2018, Proceedings - 17th IEEE International Conference on Trust, Security and Privacy in Computing and Communications and 12th IEEE International Conference on Big Data Science and Engineering, Trustcom/BigDataSE 2018. Institute of Electrical and Electronics Engineers Inc., p. 163-168 6 p. 8455902. (Proceedings - 17th IEEE International Conference on Trust, Security and Privacy in Computing and Communications and 12th IEEE International Conference on Big Data Science and Engineering, Trustcom/BigDataSE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taxonomies
Data privacy
Security of data
Data communication systems
Internet of things
1 Citation (Scopus)

Securing Wireless Networks from Sinkhole and Sybil Attacks Using Secure Data Aggregation Protocol

Rizvi, S. S., Gualdoni, J. & Razaque, A., Sep 5 2018, Proceedings - 17th IEEE International Conference on Trust, Security and Privacy in Computing and Communications and 12th IEEE International Conference on Big Data Science and Engineering, Trustcom/BigDataSE 2018. Institute of Electrical and Electronics Engineers Inc., p. 721-726 6 p. 8455973

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wireless networks
Agglomeration
Network protocols
Access control
Authentication

Security Patterns As Architectural Solution - Mitigating Cross-Site Scripting Attacks in Web Applications

Anand, P. & Ryoo, J., Jun 21 2018, Proceedings - 2017 International Conference on Software Security and Assurance, ICSSA 2017. Institute of Electrical and Electronics Engineers Inc., p. 25-31 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experiments

Sliding mode speed and load torque observer for core and copper loss minimization control of the induction motor drive

Comanescu, M., Apr 27 2018, Proceedings - 2018 IEEE International Conference on Industrial Technology, ICIT 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-February. p. 534-539 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction motors
Loads (forces)
Torque
Fluxes
Copper
2017

Activation time analysis in a propulsion system

Moore, J. D., Jan 1 2017, 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, (53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propulsion
Chemical activation
Propellants
Orifices
Hydrazine
3 Citations (Scopus)

Addressing Security Challenges in Cloud Computing - A Pattern-Based Approach

Anand, P., Ryoo, J. & Kim, H., Jan 10 2017, Proceedings - 2015 1st International Conference on Software Security and Assurance, ICSSA 2015. Ryoo, J. & Kim, H. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 13-18 6 p. 7812940. (Proceedings - 2015 1st International Conference on Software Security and Assurance, ICSSA 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cloud computing
Internet
1 Citation (Scopus)

A framework for the design and optimization of self-folding structures

Bowen, L., Frecker, M. I., Simpson, T. W. & Strzelec, R. A., Jan 1 2017, 41st Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Folding
Optimization
Framework
Design
Trial and error
5 Citations (Scopus)

A Fuzzy-Logic Approach for Evaluating a Cloud Service Provider

Mitchell, J., Rizvi, S. S. & Ryoo, J., Jan 10 2017, Proceedings - 2015 1st International Conference on Software Security and Assurance, ICSSA 2015. Ryoo, J. & Kim, H. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 19-24 6 p. 7812941. (Proceedings - 2015 1st International Conference on Software Security and Assurance, ICSSA 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuzzy logic
Fuzzy inference
Cloud computing
Industry

A human factors-based ICrossing system

Fayerweather, A., Fillman, D., Smith, R. & Huang, H., Jan 1 2017, 2017 Joint Rail Conference, JRC 2017. American Society of Mechanical Engineers, (2017 Joint Rail Conference, JRC 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Human engineering
Rails
Crossings (pipe and cable)
Detectors
cell phone

A new power efficient wireless modem

Razaque, A., Almani, M., Rizvi, S. S. & Vamsi, B., Feb 2 2017, Proceedings of the 2016 19th International Multi-Topic Conference, INMIC 2016. Institute of Electrical and Electronics Engineers Inc., 7840104. (Proceedings of the 2016 19th International Multi-Topic Conference, INMIC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

modems
Power Amplifier
Modems
power amplifiers
Power amplifiers

Behavior of geogrid-reinforced railroad ballast particles under different loading configurations during initial compaction phase

Liu, S., Huang, H. & Qiu, T., Jan 1 2017, 2017 Joint Rail Conference, JRC 2017. American Society of Mechanical Engineers, (2017 Joint Rail Conference, JRC 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroads
railroad
Rails
Compaction
Railroad tracks

Blackbox: Distributed peer to peer file storage and backup

Razaque, A., Almani, M. & Rizvi, S. S., Mar 1 2017, 2016 Annual Connecticut Conference on Industrial Electronics, Technology and Automation, CT-IETA 2016. Institute of Electrical and Electronics Engineers Inc., 7868258

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Redundancy
Copying
MATLAB
1 Citation (Scopus)

Black-box: A new secure distributed peer-To-peer file storage and backup system

Rizvi, S. S. & Razaque, A., Feb 2 2017, Proceedings of the 2016 19th International Multi-Topic Conference, INMIC 2016. Institute of Electrical and Electronics Engineers Inc., 7840163. (Proceedings of the 2016 19th International Multi-Topic Conference, INMIC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

backups
Peer to Peer
Black Box
files
Redundancy

Design of an adaptive estimator for the speed and load torque of the PMSM using an extended dynamic model

Comanescu, M., Apr 26 2017, 2017 IEEE International Conference on Industrial Technology, ICIT 2017. Institute of Electrical and Electronics Engineers Inc., p. 276-281 6 p. 7913096

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic models
Loads (forces)
Torque
Rotors
Electric potential
1 Citation (Scopus)

Design of a pseudo-MRAS sliding mode observer with double feedback for estimation of the rotor time constant of the induction motor

Comanescu, M., Apr 26 2017, 2017 IEEE International Conference on Industrial Technology, ICIT 2017. Institute of Electrical and Electronics Engineers Inc., p. 270-275 6 p. 7913095

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction motors
Rotors
Fluxes
Feedback
Electric potential
1 Citation (Scopus)

Design of estimators for the inverse of the rotor time constant of the induction motor with known flux

Comanescu, M., Oct 20 2017, Conference Proceedings - 2017 8th International Symposium on Sensorless Control for Electrical Drives, SLED 2017. Institute of Electrical and Electronics Engineers Inc., p. 43-48 6 p. 8078428

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction Motor
Time Constant
Induction motors
Rotor
Rotors
1 Citation (Scopus)

Development of 10 inch diameter titanium rolling metal diaphragm tank for green propellant

Conomos, H., Alongi, C. G., Yager, J., Goddard, R. A., Salzler, T. J., Fetes, J. P., Burch, K. J. & Moore, J. D., Jan 1 2017, 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, (53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellants
Diaphragms
Titanium
Metals
Dynamic response

Development of a flux, speed and rotor time constant estimation scheme for the sensorless induction motor drive

Comanescu, M., Oct 20 2017, Conference Proceedings - 2017 8th International Symposium on Sensorless Control for Electrical Drives, SLED 2017. Institute of Electrical and Electronics Engineers Inc., p. 213-218 6 p. 8078452

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction Motor
Time Constant
Induction motors
Rotor
Sliding Mode Observer

Gas thermometry using two-thermocouple radiation correction

Martin, C. R., LePera, S. & Vandsburger, U., Jan 1 2017, Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermocouples
Radiation
Gases
Temperature
Air

Optimally-Tuned plasmonic nanoantenna dimer arrays for electro-optical sensing

Zimmerman, D. T., Wambold, R. A., Weisel, G. J. & Willis, B. G., Jan 23 2017, 2016 IEEE Photonics Conference, IPC 2016. Institute of Electrical and Electronics Engineers Inc., p. 412-413 2 p. 7831162. (2016 IEEE Photonics Conference, IPC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dimers
Gold
dimers
electric conductors
optical resonance
1 Citation (Scopus)

Propulsion education at the Pennsylvania State University

Boyer, J. E., Yetter, R. A., Risha, G. A. & Maicke, B. A., Jan 1 2017, 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, (53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propulsion
Education
Students
Engineering research
Research laboratories
1 Citation (Scopus)

Protecting an automobile network using distributed firewall system

Rizvi, S. S., Willett, J., Perino, D., Vasbinder, T. & Marasco, S., Mar 22 2017, Proceedings of the 2nd International Conference on Internet of Things and Cloud Computing, ICC 2017. Hamdan, H., Boubiche, D. E. & Hidoussi, F. (eds.). Association for Computing Machinery, a174. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Security systems
Automobiles
Railroad cars
Automotive industry
Brakes
2 Citations (Scopus)

Replacing mechanized oxyfuel cutting sensors with ion current sensing

Martin, C. R., Jan 1 2017, Manufacturing Equipment and Systems. American Society of Mechanical Engineers, (ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sensors
Ions
Temperature
Flow rate
Calibration

Security evaluation of cloud service providers using third party auditors

Rizvi, S. S., Bolish, T. A. & Pfeffer, J. R., Mar 22 2017, Proceedings of the 2nd International Conference on Internet of Things and Cloud Computing, ICC 2017. Hamdan, H., Boubiche, D. E. & Hidoussi, F. (eds.). Association for Computing Machinery, a106. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cloud computing
Data transfer
Risk assessment
Gages
Industry
1 Citation (Scopus)

Surge event mitigation in propulsion systems

Gilbert, J. & Moore, J. D., Jan 1 2017, 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, (53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propulsion
Water hammer
Monopropellants
Surges (fluid)
Liquids
2016
1 Citation (Scopus)

A hybrid adaptive observer for the speed and flux estimation of induction motors

Comanescu, M., May 10 2016, 2016 IEEE Applied Power Electronics Conference and Exposition, APEC 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-May. p. 2855-2860 6 p. 7468269

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction motors
Fluxes
Feedback
3 Citations (Scopus)

A speed adaptive sensorless flux observer for the induction motor drive using Sylvester criterion design

Comanescu, M., May 10 2016, 2016 IEEE Applied Power Electronics Conference and Exposition, APEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 2759-2763 5 p. 7468254. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC; vol. 2016-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction motors
Fluxes
Feedback
Experiments
4 Citations (Scopus)

Bypassing the integrity checking of rights objects in OMA DRM: A case study with the MelOn music service

Choi, J., Aiken, W., Ryoo, J. & Kim, H., Jan 4 2016, ACM IMCOM 2016: Proceedings of the 10th International Conference on Ubiquitous Information Management and Communication. Association for Computing Machinery, Inc, a62. (ACM IMCOM 2016: Proceedings of the 10th International Conference on Ubiquitous Information Management and Communication).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reverse engineering
Industry

Design and implementation of a Sliding Mode Pseudo-MRAS speed and load torque estimator for the induction motor

Murray, B., Orr, J. & Comanescu, M., Dec 21 2016, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 2743-2747 5 p. 7793106

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adaptive systems
Induction motors
Loads (forces)
Torque
Fluxes
4 Citations (Scopus)

Design of a MRAS-based estimator for the speed and rotor time constant of the induction motor using sliding mode

Comanescu, M., Jul 28 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2016. Institute of Electrical and Electronics Engineers Inc., p. 740-745 6 p. 7525807. (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction Motor
Adaptive systems
Reference Model
Adaptive Systems
Sliding Mode
2 Citations (Scopus)

Design of a MRAS-type sliding mode observer for estimation of the rotor time constant of the induction motor

Comanescu, M., Dec 21 2016, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 2748-2753 6 p. 7793350

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Induction motors
Rotors
Fluxes
Inductance
Stators
7 Citations (Scopus)

Design of a second-order sliding mode MRAS speed estimator for the induction motor drive

Orr, J., Murray, B. & Comanescu, M., Apr 25 2016, 2016 IEEE Power and Energy Conference at Illinois, PECI 2016. Institute of Electrical and Electronics Engineers Inc., 7459239. (2016 IEEE Power and Energy Conference at Illinois, PECI 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adaptive systems
Induction motors
Fluxes
Stators
Electric potential
3 Citations (Scopus)

Effects of water hammer on propulsion systems

Brindle, B., Gilbert, J., Moore, J. D. & Risha, G. A., Jan 1 2016, 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016. American Institute of Aeronautics and Astronautics Inc, AIAA, (52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Water hammer
Propulsion
Propellants
Monopropellants
Hydrazine