Penn State Erie, The Behrend College

  • United States

Research Output

Filter
Conference contribution
2016

Design of multipurpose products: A study on user expectations

Viswanathan, V. & Sangelkar, S. C., Jan 1 2016, 4th International Conference on Design Creativity, ICDC 2016. The Design Society

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Detecting the impact of human mega-events on spectrum usage

Abdallah, A., MacKenzie, A. B., Marojevic, V., Kalliovaara, J., Bacchus, R., Riaz, A., Roberson, D., Juhani, H. & Ekman, R., Mar 30 2016, 2016 13th IEEE Annual Consumer Communications and Networking Conference, CCNC 2016. Institute of Electrical and Electronics Engineers Inc., p. 523-529 7 p. 7444835. (2016 13th IEEE Annual Consumer Communications and Networking Conference, CCNC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Distributed and robust support vector machine

Liu, Y., Ding, H., Huang, Z. & Xu, J., Dec 1 2016, 27th International Symposium on Algorithms and Computation, ISAAC 2016. Hong, S-H. (ed.). Schloss Dagstuhl- Leibniz-Zentrum fur Informatik GmbH, Dagstuhl Publishing, p. 54.1-54.13 (Leibniz International Proceedings in Informatics, LIPIcs; vol. 64).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Effect of applied electricity on springback during bending and flattening of 304/316 stainless steel, titanium AMS-T-9046 and magnesium AZ31B

Niebauer, J., Grimm, T., Shaffer, D., Sweeney, I., Ragai, I. & Roth, J. T., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Effect of cooling rate on the crystal polymorphism in beta-nucleated isotactic polypropylene as revealed by a combined WAXS/FSC analysis

Rhoades, A. M., Wonderling, N., Gohn, A., Williams, J., Mileva, D., Gahleitner, M. & Androsch, R., May 18 2016, VIII International Conference on "Times of Polymers and Composites": From Aerospace to Nanotechnology. D'Amore, A., Grassia, L. & Acierno, D. (eds.). American Institute of Physics Inc., 4949651. (AIP Conference Proceedings; vol. 1736).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of fiber morphology on the elastic properties of statistically equivalent uncorrelated volume elements

Sanei, S. H. R. & Fertig, R. S., Jan 1 2016, SAMPE Long Beach 2016 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2016-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Effect of graphene nanoplatelet thickness on electrochemical performance of dye-sensitized solar cell

Gong, J., Sumathy, K., Zhou, Z. & Qiao, Q., Aug 5 2016, 2016 IEEE International Conference on Electro Information Technology, EIT 2016. IEEE Computer Society, p. 297-301 5 p. 7535255. (IEEE International Conference on Electro Information Technology; vol. 2016-August).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Effect of nanostructures and wettability on the instability of thin water films on a solid surface: A molecular dynamics study

Sun, L., Zhou, J. & Jones, P., Jan 1 2016, ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 7921. (ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrically assisted global springback elimination after single point incremental forming

Neveux, T., Ruszkiewicz, B. J., Grimm, T., Roth, J. T. & Ragai, I., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Electrically assisted global springback elimination in ams-t-9046 titanium after single point incremental forming

Grimm, T. J., Roth, J. T. & Ragai, I., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Electrohydrodynamic-jet deposition of Pt-based Fuel cell catalysts

Hollinger, A. S. & Kenis, P. J. A., Jan 1 2016, ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2016, collocated with the ASME 2016 Power Conference and the ASME 2016 10th International Conference on Energy Sustainability. American Society of Mechanical Engineers, (ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2016, collocated with the ASME 2016 Power Conference and the ASME 2016 10th International Conference on Energy Sustainability).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Enhance hands on experience of system and control using low cost LEGO kits

Wu, Y., De Vries, C., Onipede, O. & Ford, M., Nov 28 2016, FIE 2016 - Frontiers in Education 2016: The Crossroads of Engineering and Business. Institute of Electrical and Electronics Engineers Inc., 7757671. (Proceedings - Frontiers in Education Conference, FIE; vol. 2016-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Fast alternating projected gradient descent algorithms for recovering spectrally sparse signals

Cho, M., Cai, J. F., Liu, S., Eldar, Y. C. & Xu, W., May 18 2016, 2016 IEEE International Conference on Acoustics, Speech and Signal Processing, ICASSP 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 4638-4642 5 p. 7472556. (ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings; vol. 2016-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Feature extraction and classification of woven fabric using optimized Haralick parameters: A rough set based approach

Chandra, J. K., Majumdar, M. & Sarkar, S., Jul 14 2016, 2016 2nd International Conference on Control, Instrumentation, Energy and Communication, CIEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 541-545 5 p. 7513748. (2016 2nd International Conference on Control, Instrumentation, Energy and Communication, CIEC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Filling the skills gap in U.S. manufacturing: Promoting internships and co-op experiences and integrating industrial engineering courses to improve student design and manufacturing knowledge

Lynch, P. & Aqlan, F., Nov 28 2016, FIE 2016 - Frontiers in Education 2016: The Crossroads of Engineering and Business. Institute of Electrical and Electronics Engineers Inc., 7757590. (Proceedings - Frontiers in Education Conference, FIE; vol. 2016-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

Finding rigid sub-structure patterns from 3D point-sets

Chen, Z., Chen, D., Ding, H., Huang, Z., Li, Z., Sehgal, N., Fritz, A., Berezney, R. & Xu, J., Jan 1 2016, 2016 23rd International Conference on Pattern Recognition, ICPR 2016. Institute of Electrical and Electronics Engineers Inc., p. 1725-1730 6 p. 7899885. (Proceedings - International Conference on Pattern Recognition; vol. 0).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Incorporating FEA in an undergraduate biomechanics course

Wu, Y., Khalilollahi, A. & Martone, P., Nov 28 2016, FIE 2016 - Frontiers in Education 2016: The Crossroads of Engineering and Business. Institute of Electrical and Electronics Engineers Inc., 7757627. (Proceedings - Frontiers in Education Conference, FIE; vol. 2016-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lattice boltzmann simulation of flow in a multiple layer water filter

Su, Y. & Sun, L., Jan 1 2016, ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 7906. (ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lean process improvement of first case scheduling in operating rooms

Aqlan, F., Ashour, O. & Pedersen, A., Jan 1 2016, 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016. IEOM Society, p. 707-716 10 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Modeling the variability of glenoid geometry in intact shoulders

De Vries, C. M. & Parkinson, M. B., Jan 1 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modified logistic regression algorithm for accurate determination of heart beats from noisy passive RFID tag data

Vora, S. & Kurzweg, T., Apr 18 2016, 3rd IEEE EMBS International Conference on Biomedical and Health Informatics, BHI 2016. Institute of Electrical and Electronics Engineers Inc., p. 29-32 4 p. 7455827. (3rd IEEE EMBS International Conference on Biomedical and Health Informatics, BHI 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Motivational differences between senior and freshman engineering design students: A multi-institution study

Bessette, A., Morkos, B. & Sangelkar, S., Jan 1 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Orientation and displacement detection for smartphone device based inertial measurement units

Elarabi, T. A. & Suprem, A., Jan 28 2016, 2015 IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2015. Institute of Electrical and Electronics Engineers Inc., p. 122-126 5 p. 7394313. (2015 IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parametric study on wall springback in tailor welded long channels

Nikhare, C. P., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Preload based ADRC physiological controller for rotary blood pump

Wu, Y., Zheng, Q. & Lim, E., Aug 26 2016, Proceedings of the 35th Chinese Control Conference, CCC 2016. Chen, J., Zhao, Q. & Chen, J. (eds.). IEEE Computer Society, p. 9428-9433 6 p. 7554853. (Chinese Control Conference, CCC; vol. 2016-August).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Process improvement approach to investigate low block utilization of operating rooms: A case study

Ashour, O., Aqlan, F. & Pedersen, A., Jan 1 2016, 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016. IEOM Society, p. 680-690 11 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reducing estimated parameters of a synchronous generator for microgrid applications

Rasouli, M. & Sabzehgar, R., Jan 1 2016, ECCE 2016 - IEEE Energy Conversion Congress and Exposition, Proceedings. Institute of Electrical and Electronics Engineers Inc., 7855381. (ECCE 2016 - IEEE Energy Conversion Congress and Exposition, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Springback induced in single point incrementally formed 2024-t3 aluminum of various thicknesses

Neveux, T. C., Roth, J. T. & Ragai, I., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Statistical analytics of wearable passive RFID-based biomedical textile monitors for real-time state classification

Mongan, W., Dandekar, K., Dion, G., Kurzweg, T. & Fontecchio, A., Feb 11 2016, 2015 IEEE Signal Processing in Medicine and Biology Symposium - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7405465. (2015 IEEE Signal Processing in Medicine and Biology Symposium - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Stochastic failure analysis of an uncorrelated volume element using extended finite element method

Sanei, S. H. R., Barsotti, E. J. & Fertig, R. S., Jan 1 2016, Proceedings of the American Society for Composites - 31st Technical Conference, ASC 2016. Davidson, B. D., Czabaj, M. W. & Ratcliffe, J. G. (eds.). DEStech Publications Inc., (Proceedings of the American Society for Composites - 31st Technical Conference, ASC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching modern control theory to undergraduates using a state space model of a synchronous generator

Rasouli, M., Weissbach, R. & Yeung, D., Nov 28 2016, FIE 2016 - Frontiers in Education 2016: The Crossroads of Engineering and Business. Institute of Electrical and Electronics Engineers Inc., 7757588. (Proceedings - Frontiers in Education Conference, FIE; vol. 2016-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Understanding the differences in hemispherical dome and biaxial test during equi-biaxial tension on cruciform

Nikhare, C. P., Vorisek, E., Nolan, J. & Roth, J. T., Jan 1 2016, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

User preferences in the design of multi-purpose products: A case study on the redesign of a utility tool

Viswanathan, V., Alexander, D., Sangelkar, S. & Moody, J. B., Jan 1 2016, 28th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations
2015

A cross-layer controller for adaptive video streaming over IEEE 802.11 networks

Abdallah, A. S. & Mackenzie, A. B., Sep 9 2015, 2015 IEEE International Conference on Communications, ICC 2015. Institute of Electrical and Electronics Engineers Inc., p. 6797-6802 6 p. 7249409. (IEEE International Conference on Communications; vol. 2015-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

A difference-comparison-based approach for malicious meter inspection in neighborhood area smart grids

Xia, X., Liang, W., Xiao, Y., Zheng, M. & Xiao, Z., Sep 9 2015, 2015 IEEE International Conference on Communications, ICC 2015. Institute of Electrical and Electronics Engineers Inc., p. 802-807 6 p. 7248420. (IEEE International Conference on Communications; vol. 2015-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Scopus citations

A molecular dynamics study for stability of thin water films on nanostructured surfaces

Sun, L. & Zhou, J., Jan 1 2015, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, (ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

A study of peek/hbn composites as a commercial material option

Musgrave, A., Rhoades, A. & Weigand, J., Jan 1 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. Society of Plastics Engineers, p. 639-643 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Checklists, checklists, every where, but not a list to easily check: An exploratory study of personal health information management practices

Grandhi, S. A., Osatuyi, B. & Calderon, E., Jan 1 2015, 2015 Americas Conference on Information Systems, AMCIS 2015. Americas Conference on Information Systems, (2015 Americas Conference on Information Systems, AMCIS 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cognitive walkthrough: Medication administration process in a virtual nursing training program

Huang, Y. H. & Henley, C. C., Jan 1 2015, IIE Annual Conference and Expo 2015. Institute of Industrial Engineers, p. 265-271 7 p. (IIE Annual Conference and Expo 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of engineering economics learning outcomes and student perception

Kauffmann, P. J., Wilck, J. & Lynch, P. C., 2015, 122nd ASEE Annual Conference and Exposition: Making Value for Society. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Defect analytics in a high-end server manufacturing environment

Aqlan, F., Saha, C. & Ramakrishnan, S., Jan 1 2015, IIE Annual Conference and Expo 2015. Institute of Industrial Engineers, p. 892-900 9 p. (IIE Annual Conference and Expo 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Direct electric current spot treatment's effect on springback of 90 degree bent 2024-T3 aluminum

Ruszkiewicz, B. J., Scriva, C., Reese, Z. C., Nikhare, C. P., Roth, J. T. & Ragai, I., Jan 1 2015, Processing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Effect of toolpath on the springback of 2024-t3 aluminum during single point incremental forming

Reese, Z. C., Ruszkiewicz, B. J., Nikhare, C. P. & Roth, J. T., 2015, Processing. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Evaluating candidate plastic materials to replace stainless steel shims used in elastomeric bearing helicopter rotors

Alderman, Z., Goray, T. & Young, B., Jan 1 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. Society of Plastics Engineers, (Annual Technical Conference - ANTEC, Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of dispatching rules in manufacturing using simulation and data envelopment analysis

Ahmed, A., Al-Mashraie, M. & Aqlan, F., Jan 1 2015, IIE Annual Conference and Expo 2015. Institute of Industrial Engineers, p. 1016-1025 10 p. (IIE Annual Conference and Expo 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feasibility of end mill cooling using the venturi effect with compressed air

Ruszkiewicz, B. J., Reese, Z. C. & Roth, J. T., Jan 1 2015, Processing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Generation of synthetic FRP microstructures based on experimentally observed microstructures

Sanei, S. H. R. & Fertig, R. S., Jan 1 2015, TMS Annual Meeting. Minerals, Metals and Materials Society, p. 1041-1047 7 p. (TMS Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Improving senior capstone design student performance through integration of presentation intervention plan

Bessette, A., Morkos, B. & Sangelkar, S., Jan 1 2015, 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Incrementally formed stiffeners effect on the reduction of springback in 2024-T3 aluminum after single point incremental forming

Ruszkiewicz, B. J., Dodds, S. S., Reese, Z. C., Roth, J. T. & Ragai, I., 2015, Processing. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Influences of melt rotation technology on polymeric material injection molding process and final product properties

Li, Q., Coulter, J. P., Beaumont, J. P. & Rhoades, A. M., Jan 1 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. Society of Plastics Engineers, p. 1711-1718 8 p. (Annual Technical Conference - ANTEC, Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations