Penn State Erie, The Behrend College

  • United States

Research Output

Filter
Conference contribution
2008

Team-RPD: A collaborative model of the recognition-primed decision process

Fan, X. & Yen, J., Dec 1 2008, Proceedings - 2008 IEEE/WIC/ACM International Conference on Intelligent Agent Technology, IAT 2008. p. 136-139 4 p. 4740612. (Proceedings - 2008 IEEE/WIC/ACM International Conference on Intelligent Agent Technology, IAT 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

The influence of agent reliability on trust in human-agent collaboration

Fan, X., Oh, S., McNeese, M., Yen, J., Cuevas, H., Strater, L. & Endsley, M. R., Dec 1 2008, Proceedings of the ECCE 2008: European Conference on Cognitive Ergonomics: The Ergonomics of Cool Interaction. 1473028. (ACM International Conference Proceeding Series; vol. 369).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Ultra accuracy parallel electronic datum optical metrology system of systems

Xiong, X. W., Bear, W. L., Roth, J. T. & Schoen, M. P., Jun 26 2008, Advanced Materials and Devices for Sensing and Imaging III. 682925. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6829).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Viscoelasticity and crystallization of PC/mPP nanoblends prepared via in situ polymerization and compatiblization

Madbouly, S., Alam, T. M. & Otaigbe, J. U., Sep 11 2008, The XVth International Congress on Rheology - The Society of Rheology 80th Annual Meeting. p. 887-889 3 p. (AIP Conference Proceedings; vol. 1027).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

A microfabricated involute-foil regenerator for stirling engines

Tew, R., Ibrahim, M., Danila, D., Simon, T., Mantell, S., Sun, L., Gedeon, D., Kelly, K., McLean, J., Wood, G. & Qiu, S., Nov 6 2007, Collection of Technical Papers - 5th International Energy Conversion Engineering Conference. p. 326-350 25 p. (Collection of Technical Papers - 5th International Energy Conversion Engineering Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

An assessment of electronic banking initiatives in nigeria

Andoh-Baidoo, F. K., Osatuyi, B., Aidoo, E. S. & Kah, M., Dec 1 2007, Association for Information Systems - 13th Americas Conference on Information Systems, AMCIS 2007: Reaching New Heights. 1 p. (Association for Information Systems - 13th Americas Conference on Information Systems, AMCIS 2007: Reaching New Heights; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An S-curve Bayesian model for forecasting probability distributions on project duration and cost at completion

Kim, B. C. & Reinschmidt, K., Dec 1 2007, CME 2007 Conference - Construction Management and Economics: 'Past, Present and Future'. p. 1449-1459 11 p. (CME 2007 Conference - Construction Management and Economics: 'Past, Present and Future').

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Application of electromagnetic force in laser welding

Zhou, J. & Tsai, H. L., Jan 1 2007, Heat Transfer, Fluid Flows, and Thermal Systems. American Society of Mechanical Engineers (ASME), p. 1025-1030 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

CAD models for estimating the capacitance of a microstrip interconnect: Comparison and improvisation

Nelatury, S. R., Sadiku, M. N. O. & Devabhaktuni, V. K., 2007, Progress in Electromagnetics Research Symposium 2007, PIERS 2007 Prague. Electromagnetics Academy, p. 18-23 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Scopus citations

Comparison of approximate formulas for the capacitance of microstrip line

Sadiku, M. N. O., Musa, S. M. & Nelatury, S. R., 2007, 2007 IEEE SoutheastCon. p. 427-432 6 p. 4147469

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Compressive superplastic behavior of 6Al-4V titanium caused by an applied DC current

Kronenberger, T. J., Warner, M. K. & Roth, J. T., Dec 28 2007, Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006. p. 13-20 8 p. (Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Coupled multifield finite element analysis model of upsetting under AN applied direct current

Kronenberger, T. J., Johnson, D. H. & Roth, J. T., Dec 31 2007, American Society of Mechanical Engineers. p. 949-958 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Direct assessment of mechanics of materials learning with concept inventory

Sweeney, S., Englund, R. & Edwards, R., 2007, 2007 ASEE Annual Conference and Exposition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Endmill condition monitoring and failure forecasting method for curvilinear cuts of non-constant radii

Suprock, C. A., Roth, J. T. & Downey, L. M., Dec 28 2007, American Society of Mechanical Engineers. p. 507-516 10 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Forming stretch broken carbon fiber composites into complex shapes

Dillon, G. P. & Stiver, D. H., Oct 1 2007, SAMPE '07: M and P - From Coast to Coast and Around the World; Conference Proceedings. (International SAMPE Symposium and Exhibition (Proceedings); vol. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Hardware architecture for nanorobot application in cerebral aneurysm

Cavalcanti Da Silva, A., Shirinzadeh, B., Fukuda, T. & Ikeda, S., Dec 1 2007, 2007 7th IEEE International Conference on Nanotechnology - IEEE-NANO 2007, Proceedings. p. 237-242 6 p. 4601179. (2007 7th IEEE International Conference on Nanotechnology - IEEE-NANO 2007, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Scopus citations

High heat polycarbonates

Smith, G. F., Mahood, J., Pixton, M., Zerda, A. S. & Sanner, M. A., Sep 28 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 1150-1155 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Incorporating term selection into separable nonlinear least squares identification methods

Rasouli, M., Westwick, D. & Rosehart, W., Dec 1 2007, 2007 Canadian Conference on Electrical and Computer Engineering, CCECD. p. 892-895 4 p. 4232887

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Interfiber orientation and volume fraction effects in electronic composite boards

Khalilollahi, A. & Warley, R. L., 2007, American Society for Composites - 22nd Technical Conference of the American Society for Composites 2007 - Composites: Enabling a New Era in Civil Aviation. Vol. 1. p. 466-478 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of transport phenomena in three-dimensional gas metal arc welding of thick metals

Zhou, J., Davoud, M. S. & Tsai, H. L., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 175-182 8 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Monte Carlo analysis of time-dependent cylindrical problems

Sadiku, M. N. O., Akujuobi, C. M., Musa, S. M. & Nelatury, S. R., Aug 10 2007, 2007 IEEE SoutheastCon. p. 778-782 5 p. 4147537

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Nanorobots for laparoscopic cancer surgery

Cavalcanti, A., Shirinzadeh, B., Murphy, D. & Smith, J. A., 2007, Proceedings - 6th IEEE/ACIS International Conference on Computer and Information Science, ICIS 2007; 1st IEEE/ACIS International Workshop on e-Activity, IWEA 2007. p. 738-743 6 p. 4276470. (Proceedings - 6th IEEE/ACIS International Conference on Computer and Information Science, ICIS 2007; 1st IEEE/ACIS International Workshop on e-Activity, IWEA 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Scopus citations

Physiological control of rotary left ventricular assist device

Wu, Y., Dec 1 2007, Proceedings of the 26th Chinese Control Conference, CCC 2007. p. 469-474 6 p. 4347618

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Process and performance characterization of stretch broken carbon fiber materials

Jacobsen, G. & Dillon, G. P., Oct 1 2007, SAMPE '07: M and P - From Coast to Coast and Around the World; Conference Proceedings. (International SAMPE Symposium and Exhibition (Proceedings); vol. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Program value: What can we learn from major defense programs?

Patanakul, P. & Shenhar, A., Dec 1 2007, PICMET '07 - Portland International Center for Management of Engineering and Technology - Proceedings Management of Converging Technologies. p. 2140-2147 8 p. 4349545. (Portland International Conference on Management of Engineering and Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Quality and inspection of machining operations: Review of condition monitoring and CMM inspection techniques 2000 to present

Roth, J. T., Mears, L., Djurdjanovic, D., Yang, X. & Kurfess, T., 2007, American Society of Mechanical Engineers. p. 861-872 12 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

R-CAST: Integrating team intelligence for human-centered teamwork

Fan, X. & Yen, J., Nov 28 2007, AAAI-07/IAAI-07 Proceedings: 22nd AAAI Conference on Artificial Intelligence and the 19th Innovative Applications of Artificial Intelligence Conference. p. 1535-1541 7 p. (Proceedings of the National Conference on Artificial Intelligence; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

24 Scopus citations

Realistic cognitive load modeling for enhancing shared mental models in human-agent collaboration

Fan, X. & Yen, J., 2007, AAMAS'07 - Proceedings of the 6th International Joint Conference on Autonomous Agents and Multiagent Systems. p. 395-402 8 p. 60. (Proceedings of the International Conference on Autonomous Agents).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

Real-time failure forecasting for flat, ball-nose, roughing, and tapered endmills using an accelerometer

Suprock, C. A., Roth, J. T. & Downey, L. M., Aug 22 2007, Transactions of the North American Manufacturing Research Institution of SME 2007 - Papers Presented at NAMRC 35. p. 185-192 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 35).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Simulation of neural network DTMF decoder

Loker, D. & Hemminger, T. L., Dec 1 2007, Proceedings of the 18th IASTED International Conference on Modelling and Simulation, MS 2007. p. 410-415 6 p. (Proceedings of the IASTED International Conference on Modelling and Simulation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Size does matter: Automobile "facial" features predict consumer attitudes

Lum, H., Sinatra, A., Sims, V. K., Chin, M. G., Smith, H. S., Shumaker, R. & Finkelstein, N., Dec 1 2007, 51st Annual Meeting of the Human Factors and Ergonomics Society, HFES 2007. p. 1105-1108 4 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Teaching multiple class capstone projects

Koch, P. E., Young, B., Johnson, B. G. & Dropik, M. J., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. Vol. 5. p. 2856-2860 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Utilizing concept maps to improve human-agent collaboration within a recognition-primed decision model

Hanratty, T., Hammell, R. J., Yen, J. & Fan, X., Jan 1 2007, Proceedings of the IEEE/WIC/ACM International Conference on Intelligent Agent Technology, IAT 2007. Institute of Electrical and Electronics Engineers Inc., p. 116-120 5 p. 4407271. (Proceedings of the IEEE/WIC/ACM International Conference on Intelligent Agent Technology, IAT 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Vocal analysis and heart rate as measures of assertiveness and aggression

Lum, H. C., Smith-Jentsch, K., Sims, V. K. & Flood, M., Dec 1 2007, 51st Annual Meeting of the Human Factors and Ergonomics Society, HFES 2007. p. 1224-1226 3 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Work in progress - Developing and maintaining problem solving skills and concepts in statics and thermodynamics

Warley, R. L. & Onipede, Jr., O., Dec 1 2007, 37th ASEE/IEEE Frontiers in Education Conference, FIE. 4418045. (Proceedings - Frontiers in Education Conference, FIE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2006

A comparison of models for shadowing functions for random rough surfaces

Sadiku, M. N. O. & Nelatury, S. R., Nov 22 2006, Proceedings of theIEEE SoutheastCon 2006. Vol. 2006. p. 11-15 5 p. 1629315

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

A neural method for identifying transmission source locations

Hemminger, T. L., Loker, D. R. & Pomalaza-Raez, C., Dec 1 2006, 2006 IEEE 17th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC. 4022271. (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Axial temperature profile in a cylindrical tensile bar carrying a large electric current during a tensile test

Warley, R. L. & Roth, J. T., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Heat Transfer. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Boosting-based learning agents for experience classification

Chen, P. C., Fan, X., Zhu, S. & Yen, J., Jan 1 2006, Proceedings - 2006 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (IAT 2006 Main Conference Proceedings), IAT'06. IEEE Computer Society, p. 385-388 4 p. 4052947. (Proceedings - 2006 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (IAT 2006 Main Conference Proceedings), IAT'06).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Collaborative product realization of an innovative structural damper and application

Sweeney, S. & Michael, R. J., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Technology Department Heads. American Society of Mechanical Engineers (ASME), (Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Technology Department Heads).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Collaborative RPD agents assisting decision making in active decision spaces

Airy, G., Chen, P. C., Fan, X., Yen, J., Hall, D., Brogan, M. & Huynh, T., Jan 1 2006, Proceedings - 2006 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (IAT 2006 Main Conference Proceedings), IAT'06. IEEE Computer Society, p. 769-772 4 p. 4053009. (Proceedings - 2006 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (IAT 2006 Main Conference Proceedings), IAT'06).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Compressive superplastic behavior of 6Al-4V titanium caused by an applied DC current

Kronenberger, T. J., Warner, M. K. & Roth, J. T., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Materials. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational nanomechatronics: A pathway for control and manufacturing nanorobots

Cavalcanti, A., Wood, W. W., Kretly, L. C. & Shirinzadeh, B., Jan 1 2006, CIMCA 2006: International Conference on Computational Intelligence for Modelling, Control and Automation, Jointly with IAWTIC 2006: International Conference on Intelligent Agents Web Technologies .... IEEE Computer Society, 4052804. (CIMCA 2006: International Conference on Computational Intelligence for Modelling, Control and Automation, Jointly with IAWTIC 2006: International Conference on Intelligent Agents Web Technologies ...).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Scopus citations

Digital photographic imaging using MOEMS

Nasis, V. T., Hicks, R. A. & Kurzweg, T., May 8 2006, Proceedings of SPIE - The International Society for Optical Engineering. 61140N. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6114).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Directionally independent failure prediction of end-mill cutting tools: An investigation of noise reduction using higher dimensional real fourier analysis

Suprock, C. A. & Roth, J. T., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Manufacturing. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Manufacturing Engineering Division, MED).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Extended phase compensation design of power system stabilizer for Bisotoun power plant

Zafarabadi, G., Parniani, M., Rasouli, M. & Ansarimehr, P., Jan 1 2006, 5th IFAC Symposium on Power Plants and Power Systems Control, PPS 2006. PART 1 ed. IFAC Secretariat, p. 279-284 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 5, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impact of IT service provider process capabilities on service provider performance: An empirical study

Swinarski, M., Kishore, R. & Rao, H. R., Oct 18 2006, Proceedings of the 39th Annual Hawaii International Conference on System Sciences, HICSS'06. p. 199c 1579699. (Proceedings of the Annual Hawaii International Conference on System Sciences; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Scopus citations

Investigation of antimicrobial peptide salts: Efficacy and solubility in surfactant solutions for latex systems

Wicks, D. A., Rhoades, A. M., Williamson, J. S. & Miriyala, B., Jun 30 2006, Materials Research Society Symposium Proceedings. p. 139-146 8 p. (Materials Research Society Symposium Proceedings; vol. 894).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Light scattering properties of kidney epithelial cells and nuclei

Vitol, E. A., Kurzweg, T. P. & Nabet, B., May 8 2006, Progress in Biomedical Optics and Imaging - Proceedings of SPIE. 609108. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 6091).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Multi-field FE modeling of resistive heating in a 6061-T6511 aluminum specimen

Khalilollahi, A., Roth, J. T. & Johnson, D. H., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Manufacturing. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Manufacturing Engineering Division, MED).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations