• United States

Research Output

Article

Development of an ergonomic four-finger-push manual pipette design

Kim, E., Aqlan, F. & Freivalds, A., May 2020, In : Applied Ergonomics. 85, 103045.

Research output: Contribution to journalArticle

Development of a theoretical cost model for advanced composite fabrication

Gutowski, T., Hoult, D., Dillon, G., Neoh, E. T., Muter, S., Kim, E. & Tse, M., Dec 1994, In : Composites Manufacturing. 5, 4, p. 231-239 9 p.

Research output: Contribution to journalArticle

55 Scopus citations

Development of elastomeric isolators to reduce roof bolting machine drilling noise

Michael, R., Yantek, D., Johnson, D., Ferro, E. & Swope, C., Nov 1 2011, In : Noise Control Engineering Journal. 59, 6, p. 591-612 22 p.

Research output: Contribution to journalArticle

7 Scopus citations

Development of sustainable community paramedicine programmes: A case study in Pennsylvania

Huang, Y. H., Ma, L., Sabljak, L. A. & Puhala, Z. A., Jan 1 2018, In : Emergency Medicine Journal. 35, 6, p. 372-378 7 p.

Research output: Contribution to journalArticle

3 Scopus citations
4 Scopus citations

Die closing force in low pressure tube hydroforming

Nikhare, C., Weiss, M. & Hodgson, P. D., Nov 19 2010, In : Journal of Materials Processing Technology. 210, 15, p. 2238-2244 7 p.

Research output: Contribution to journalArticle

21 Scopus citations

Dielectric investigation of the molecular dynamics in blends: polymers with similar molecular architecture (TMPC/PC blend)

Mansour, A. A. & Madbouly, S., Jan 1 1995, In : Polymer International. 36, 3, p. 269-277 9 p.

Research output: Contribution to journalArticle

24 Scopus citations
22 Scopus citations

Differences in radial expansion force among inferior vena cava filter models support documented perforation rates

Robins, J. E., Ragai, I. & Yamaguchi, D. J., May 2018, In : Journal of Vascular Surgery: Venous and Lymphatic Disorders. 6, 3, p. 368-371 4 p.

Research output: Contribution to journalArticle

Differential geometry and the forming of aligned fibre composites

Gutowski, T., Hoult, D., Dillon, G. & Gonzalez-Zugasti, J., 1991, In : Composites Manufacturing. 2, 3-4, p. 147-152 6 p.

Research output: Contribution to journalArticle

25 Scopus citations
5 Scopus citations

Dimensionless Parameters as Design Guidelines for Sterilization of Dead‐Ended Tubes

Young, J. H. & Lasher, W. C., Jan 1 1995, In : Biotechnology progress. 11, 3, p. 312-317 6 p.

Research output: Contribution to journalArticle

1 Scopus citations
3 Scopus citations

Directionally independent failure prediction of end-milling tools during pocketing maneuvers

Suprock, C. A., Piazza, J. J. & Roth, J. T., Aug 1 2007, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 129, 4, p. 770-779 10 p.

Research output: Contribution to journalArticle

5 Scopus citations

DTGS: Method for effective components identification from Traditional chinese medicine formula and mechanism analysis

Luo, J., Ren, Y., Gu, H., Wu, Y. & Wang, Y., Dec 1 2013, In : Evidence-based Complementary and Alternative Medicine. 2013, 840427.

Research output: Contribution to journalArticle

10 Scopus citations

Dynamic clustering of inventory parts to enhance warehouse management

Aqlan, F., Jan 1 2017, In : European Journal of Industrial Engineering. 11, 4, p. 469-485 17 p.

Research output: Contribution to journalArticle

1 Scopus citations

Dynamic patient grouping and prioritization: a new approach to emergency department flow improvement

Ashour, O. M. & Okudan Kremer, G. E., Jan 1 2016, In : Health Care Management Science. 19, 2, p. 192-205 14 p.

Research output: Contribution to journalArticle

19 Scopus citations

Dynamic properties of elastomers as related to vibration isolator performance

Warley, R. L., Mar 1 1996, In : Rubber World. 213, 6, p. 33-39 7 p.

Research output: Contribution to journalArticle

5 Scopus citations

Effectiveness of a thermal protective coating for automotive components

Warley, R. L., Erie, P. S. & Kohli, T. S., Apr 1 2012, In : Rubber World. 246, 1, p. 16-20+29

Research output: Contribution to journalArticle

Effect of ambient temperature and cure state on the age stiffening of a cured NR/BR blend

Warley, R. L. & Halladay, J. R., Sep 1 2005, In : Polymer Testing. 24, 6, p. 678-683 6 p.

Research output: Contribution to journalArticle

3 Scopus citations

Effect of cooling rate on crystal polymorphism in beta-nucleated isotactic polypropylene as revealed by a combined WAXS/FSC analysis

Rhoades, A. M., Wonderling, N., Gohn, A., Williams, J., Mileva, D., Gahleitner, M. & Androsch, R., May 4 2016, In : Polymer. 90, p. 67-75 9 p.

Research output: Contribution to journalArticle

18 Scopus citations

Effect of curing on the broadband dielectric spectroscopy of powder coating

Madbouly, S., Serag Eldin, A. F. & Mansour, A. A., Jun 1 2007, In : European Polymer Journal. 43, 6, p. 2462-2470 9 p.

Research output: Contribution to journalArticle

11 Scopus citations

Effect of dc on the formability of Ti-6Al-4V

Ross, C. D., Kronenberger, T. J. & Roth, J. T., Jul 1 2009, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 131, 3, p. 310041-3100411 2790371 p.

Research output: Contribution to journalArticle

59 Scopus citations

Effect of electric current density on the mechanical property of advanced high strength steels under quasi-static tensile loads

Kim, M. S., Vinh, N. T., Yu, H. H., Hong, S. T., Lee, H. W., Kim, M. J., Han, H. N. & Roth, J. T., Jan 1 2014, In : International Journal of Precision Engineering and Manufacturing. 15, 6, p. 1207-1213 7 p.

Research output: Contribution to journalArticle

30 Scopus citations

Effect of ionic content, solid content, degree of neutralization, and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

Nanda, A. K., Wicks, D. A., Madbouly, S. & Otaigbe, J. U., Dec 15 2005, In : Journal of Applied Polymer Science. 98, 6, p. 2514-2520 7 p.

Research output: Contribution to journalArticle

78 Scopus citations

Effect of Melt-Memory on the Crystal Polymorphism in Molded Isotactic Polypropylene

Gohn, A. M., Rhoades, A. M., Okonski, D. & Androsch, R., Aug 2018, In : Macromolecular Materials and Engineering. 303, 8, 1800148.

Research output: Contribution to journalArticle

5 Scopus citations

Effect of method of preparation on molecular packing of TMPC/PS blends

Mansour, A. A., Madbouly, S. A., Höhne, G. & Dollhop, W., Dec 1 1997, In : Polymer International. 42, 2, p. 143-148 6 p.

Research output: Contribution to journalArticle

10 Scopus citations

Effect of microstructure uncertainty and testing frequency on storage and loss moduli of injection molded MWCNT reinforced polyamide 66 nanocomposites

Xu, X., Sanei, S. H. R., Steinmetz, E., Gohn, A. & Williams, J., May 2020, In : Polymer Testing. 85, 106455.

Research output: Contribution to journalArticle

5 Scopus citations

Effect of penetrator size on dynamic failure response of woven graphite epoxy composites around the critical perforation energy

Ojo, O. B., Wosu, S. N., Slaughter, W. & Onipede, O. O., Apr 1 2007, In : Journal of ASTM International. 4, 4

Research output: Contribution to journalArticle

2 Scopus citations

Effect of peroxide crosslinking on the dynamic modulus of silicone rubber

Warley, R. L., Feke, D. L. & Manas-Zloczower, I., Aug 15 2005, In : Journal of Applied Polymer Science. 97, 4, p. 1504-1512 9 p.

Research output: Contribution to journalArticle

11 Scopus citations

Effect of preheat temperature on the location of the minimum state of cure in a molded component

Warley, R. L., Sep 1 2006, In : Advances in Polymer Technology. 25, 3, p. 195-207 13 p.

Research output: Contribution to journalArticle

4 Scopus citations

Effect of prestrain on formability and forming limit strains during tube hydroforming

Nikhare, C. P. & Narasimhan, K., Jun 1 2008, In : Computers, Materials and Continua. 7, 3, p. 129-138 10 p.

Research output: Contribution to journalArticle

6 Scopus citations

Effect of shear history on the morphology and coarsening behaviour of polycarbonate/poly(styrene-co-acrylonitrile) blend

Hanafy, G. M., Madbouly, S. A., Ougizawa, T. & Inoue, T., Jan 26 2005, In : Polymer. 46, 3, p. 705-712 8 p.

Research output: Contribution to journalArticle

14 Scopus citations

Effect of shear memory on the coarsening behaviour of polystyrene and poly(vinyl methyl ether) blend

Madbouly, S. A., Ougizawa, T. & Inoue, T., Jun 2004, In : Polymer. 45, 13, p. 4483-4489 7 p.

Research output: Contribution to journalArticle

5 Scopus citations

Effect of shoulder diameter on microstructure of dissimilar Al alloys friction stir welding joint

Zhang, J., Ji, P., Zhou, J. & Lian, Y., Nov 25 2016, In : Hanjie Xuebao/Transactions of the China Welding Institution. 37, 11, p. 51-54 4 p.

Research output: Contribution to journalArticle

Effect of thermal history on the microstructure of a poly(tetramethylene oxide)-based polyurea

Castagna, A. M., Pangon, A., Dillon, G. P. & Runt, J., Aug 27 2013, In : Macromolecules. 46, 16, p. 6520-6527 8 p.

Research output: Contribution to journalArticle

26 Scopus citations

Effect of the shear flow on the phase behaviour of polystyrene/poly(vinyl methyl ether) blend

Madbouly, S., Ohmomo, M., Ougizawa, T. & Inoue, T., Mar 1999, In : Polymer. 40, 6, p. 1465-1472 8 p.

Research output: Contribution to journalArticle

39 Scopus citations

Effects of AN-contents and shear flow on the miscibility of PC/SAN blends

Hanafy, G. M., Madbouly, S. A., Ougizawa, T. & Inoue, T., Sep 16 2004, In : Polymer. 45, 20, p. 6879-6887 9 p.

Research output: Contribution to journalArticle

21 Scopus citations
1 Scopus citations

Effects of DC current on the mechanical behavior of AlMg1SiCu

Andrawes, J. S., Kronenberger, T. J., Perkins, T. A., Roth, J. T. & Warley, R. L., Jan 1 2007, In : Materials and Manufacturing Processes. 22, 1, p. 91-101 11 p.

Research output: Contribution to journalArticle

66 Scopus citations

Effects of electromagnetic force on melt flow and porosity prevention in pulsed laser keyhole welding

Zhou, J. & Tsai, H. L., Jun 1 2007, In : International Journal of Heat and Mass Transfer. 50, 11-12, p. 2217-2235 19 p.

Research output: Contribution to journalArticle

77 Scopus citations

Effects of gender on perception and interpretation of video game character behavior and emotion

Desai, N., Zhao, R. & Szafron, D., Dec 1 2017, In : IEEE Transactions on Computational Intelligence and AI in Games. 9, 4, p. 333-341 9 p.

Research output: Contribution to journalArticle

Effects of geometry on the tensile strength of extrusion blow molding pinch-off welds

Meckley, J., Greene, C., Laskowitz, I. & McConnell, J., May 1 2004, In : Polymer - Plastics Technology and Engineering. 43, 3, p. 847-869 23 p.

Research output: Contribution to journalArticle

1 Scopus citations

Effects of interleukin-6 ablation on fracture healing in mice

Wallace, A., Cooney, T. E., Englund, R. B. & Lubahn, J. D., Sep 1 2011, In : Journal of Orthopaedic Research. 29, 9, p. 1437-1442 6 p.

Research output: Contribution to journalArticle

40 Scopus citations

Effects of muscle pump on rotary blood pumps in dynamic exercise: A computer simulation study

Wu, Y. & Lim, S., Sep 1 2008, In : Cardiovascular Engineering. 8, 3, p. 149-158 10 p.

Research output: Contribution to journalArticle

6 Scopus citations

Efficacy investigation of virtual reality teaching module in manufacturing system design course

Ma, J., Jaradat, R., Ashour, O., Hamilton, M., Jones, P. & Dayarathna, V. L., Jan 1 2019, In : Journal of Mechanical Design, Transactions Of the ASME. 141, 1, 012002.

Research output: Contribution to journalArticle

Efficient 45nm ASIC architecture for full-search free intra prediction in real-time H.264/AVC decoder

Elarabi, T. A., Ayoubi, R., Mahmoud, H. & Bayoumi, M. A., Feb 1 2013, In : Journal of Signal Processing Systems. 70, 2, p. 91-104 14 p.

Research output: Contribution to journalArticle

Einfluß von Rußen auf die Schwingungsisolation

Reed, T. & Warley, R. L., Nov 1 1998, Gummi, Fasern, Kunststoffe, 51, 11, p. 882-891 10 p.

Research output: Contribution to specialist publicationArticle