• United States

Research Output 1978 2020

3 Citations (Scopus)

Detecting the impact of human mega-events on spectrum usage

Abdallah, A., MacKenzie, A. B., Marojevic, V., Kalliovaara, J., Bacchus, R., Riaz, A., Roberson, D., Juhani, H. & Ekman, R., Mar 30 2016, 2016 13th IEEE Annual Consumer Communications and Networking Conference, CCNC 2016. Institute of Electrical and Electronics Engineers Inc., p. 523-529 7 p. 7444835. (2016 13th IEEE Annual Consumer Communications and Networking Conference, CCNC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Self organizing maps
Observatories
Neural networks
Planning
21 Citations (Scopus)

Detection and Classification of Underwater Acoustic Transients Using Neural Networks

Hemminger, T. L. & Pao, Y. H., Sep 1994, In : IEEE Transactions on Neural Networks. 5, 5, p. 712-718 7 p.

Research output: Contribution to journalArticle

Underwater Acoustics
Underwater acoustics
Neural Networks
Neural networks
Power Spectral Density

Detection of the brill transition to elucidate localized thermal history in nylon 6/6 injection molded samples

Rhoades, A. M., Williams, J. & Beaumont, J., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Society of Plastics Engineers, Vol. 3. p. 2508-2513 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Microstructure
Crystalline materials
Polymer melts
Dynamic mechanical analysis

Determination of dependent and independent communication paths using neural networks.

Hemminger, T. L. & Pomalaza-Raez, C. A., Jul 1996, In : International journal of neural systems. 7, 3, p. 247-255 9 p.

Research output: Contribution to journalArticle

Routing algorithms
Neural networks
Communication
Jamming
9 Citations (Scopus)

Determination of equilibrium wire-feed-speeds for stable gas metal arc welding

Rao, Z. H., Zhou, J. & Tsai, H. L., Nov 2012, In : International Journal of Heat and Mass Transfer. 55, 23-24, p. 6651-6664 14 p.

Research output: Contribution to journalArticle

arc welding
Gas metal arc welding
welding
Welding
wire

Determination of material property changes due to combining flow fronts

Spaniol, J., Koleck, A. & Young, B., 2009, 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009. Vol. 5. p. 2889-2894 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic flow
Materials properties
Parallel flow
Laminar flow

Determining isolator damping for minimized response from impulse: A theoretical approach

Sweeney, S., Jan 1 2011, In : SAE Technical Papers.

Research output: Contribution to journalConference article

Damping
Product development
Motion control
Flexible couplings
Torque control
Damping
Product development
Motion control
Flexible couplings
Torque control

Determining the Economical Wind Power Sites for the Needed Power Loads Accounting for Geographical Terrains

Wang, W. L. & Tang, M. H., Jan 1 2016, In : Procedia Computer Science. 95, p. 217-222 6 p.

Research output: Contribution to journalConference article

Electric wiring
Wind power
Farms
Learning algorithms
Costs
1 Citation (Scopus)

Determining the minimum number of transmissions in multicast packet radio networks

Hemminger, T. L. & Pomalaza-Raez, C. A., Jan 1 1996, p. 571-576. 6 p.

Research output: Contribution to conferencePaper

Hopfield neural networks
Bandwidth

Determining the number of dependent and independent paths through packet radio networks using a Hopfield net

Hemminger, T. L. & Pomalaza-Raez, C. A., Dec 1 1995, p. 989-994. 6 p.

Research output: Contribution to conferencePaper

Transceivers
Military applications
Telecommunication networks
Telecommunication links
Computational complexity

Developing a correction factor to modify the FAHP and utility theory based triage algorithm

Ashour, O. M. & Okudan, G. E., Jan 1 2011.

Research output: Contribution to conferencePaper

Analytic hierarchy process
Decision making

Developing a virtual reality game for manufacturing education

Zhao, R., Aqlan, F., Elliott, L. J. & Lum, H. C., Aug 26 2019, Proceedings of the 14th International Conference on the Foundations of Digital Games, FDG 2019. Khosmood, F., Pirker, J., Apperley, T. & Deterding, S. (eds.). Association for Computing Machinery, 53. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtual reality
Education
Students

Developing context-dependent service-oriented applications

Ibrahim, N., Dec 1 2012, 2012 International Conference on Computer Systems and Industrial Informatics, ICCSII 2012. 6454466. (2012 International Conference on Computer Systems and Industrial Informatics, ICCSII 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical analysis
Specifications
2 Citations (Scopus)

Developing essential business and engineering skills through case competitions

Lynch, P. C., Kimpel, J. F. & Bursic, K. M., Jun 26 2016, In : ASEE Annual Conference and Exposition, Conference Proceedings. 2016-June

Research output: Contribution to journalConference article

Industry
Students
Industrial engineering
Personnel
Engineers
2 Citations (Scopus)

Developing high performance PA 11/cellulose nanocomposites for industrial-scale melt processing

Venkatraman, P., Gohn, A. M., Rhoades, A. M. & Foster, E. J., Oct 1 2019, In : Composites Part B: Engineering. 174, 106988.

Research output: Contribution to journalArticle

Nylons
Polyamides
Cellulose
Nanocomposites
Nanocrystals
Students
Fluids
Hardware
Engineering technology
Open systems

Developing Polyamide/Cellulose Nanocomposites for Industrial-Scale Processing

Venkatraman, P., Gohn, A. M., Rhoades, A. & Foster, J., Jan 1 2019, International Conference on Nanotechnology for Renewable Materials 2019. TAPPI Press, p. 1145-1159 15 p. (International Conference on Nanotechnology for Renewable Materials 2019; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanocomposites
Nylons
Polyamides
Cellulose
Processing
9 Citations (Scopus)

Development and evaluation of bioplastic containers for sustainable greenhouse and nursery production

Schrader, J. A., McCabe, K. G., Srinivasan, G., Haubrich, K., Grewell, D., Madbouly, S. & Graves, W. R., Dec 1 2015, XXIX International Horticultural Congress on Horticulture: Sustaining Lives, Livelihoods and Landscapes (IHC2014): International Symposium on Ornamental Horticulture in the Global Greenhouse. Criley, R. A. (ed.). International Society for Horticultural Science, p. 79-88 10 p. (Acta Horticulturae; vol. 1104).

Research output: Chapter in Book/Report/Conference proceedingChapter

containers
greenhouses
biocomposites
petroleum
plastics

Development and implementation of engineering modules into a 9th grade biochemistry class based on the NAE Grand Challenges

Wright, K. C., Dunda, S., Ward, J., Grdna, M. J. & Kurzweg, T., Feb 17 2015, In : Proceedings - Frontiers in Education Conference, FIE. 2015-February, February, 7044373.

Research output: Contribution to journalConference article

Biochemistry
biochemistry
academy
school grade
Students
19 Citations (Scopus)

Development and parameterization of a time-invariant (equilibrium) material model for segmented elastomeric polyureas

Grujicic, M., He, T., Pandurangan, B., Runt, J. P., Tarter, J. & Dillon, G. P., Jul 1 2011, In : Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 225, 3, p. 182-194 13 p.

Research output: Contribution to journalReview article

Parameterization
Elastomers
Microstructure
Subroutines
polyurea
4 Citations (Scopus)
Monitoring
Sensors
Accelerometers
2 Citations (Scopus)
Monitoring
Sensors
Accelerometers
1 Citation (Scopus)

Development of a mechanical vibrations course for engineering technologists

Sweeney, S. K., Johnson, D. H. & Turso, J. A., Dec 1 2003, In : ASEE Annual Conference Proceedings. p. 5057-5069 13 p.

Research output: Contribution to journalConference article

Mechanical engineering
Engineering technology
Degrees of freedom (mechanics)
Damping
Vibration measurement
Plastics molding
Engineering technology
Mechanical engineering
Injection molding
Students
6 Citations (Scopus)

Development of a seismic isolation system for commercial storage racks

Johnson, D. H., Michael, R. J., Pollino, M. C., Redovan, J. D., Moser, E. E. & MacDonald, B. A., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A AND B ed. p. 609-617 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 4, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pallets
Bearings (structural)
Earthquakes
Warehouses
Materials handling

Development of a simulation game for the craft production paradigm

Wingerter, J., McCorkle, M., Jalali, F., DeVarney, A. & Aqlan, F., Jan 1 2018, In : Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 1432-1442 11 p.

Research output: Contribution to journalConference article

Students
Teaching
Experiments
Paradigm
Simulation games
54 Citations (Scopus)

Development of a theoretical cost model for advanced composite fabrication

Gutowski, T., Hoult, D., Dillon, G., Neoh, E. T., Muter, S., Kim, E. & Tse, M., Dec 1994, In : Composites Manufacturing. 5, 4, p. 231-239 9 p.

Research output: Contribution to journalArticle

Fabrication
Composite materials
Costs
Linear equations
Machining
7 Citations (Scopus)

Development of elastomeric isolators to reduce roof bolting machine drilling noise

Michael, R., Yantek, D., Johnson, D., Ferro, E. & Swope, C., Nov 1 2011, In : Noise Control Engineering Journal. 59, 6, p. 591-612 22 p.

Research output: Contribution to journalArticle

Chucks
isolators
roofs
Mandrillus
drilling
5 Citations (Scopus)

Development of enabling automated forming technology for Stretch Broken Carbon Fiber (SBCF) materials

Dillon, G. P. & Stiver, D. H., Dec 1 2009, SAMPE '09 Spring Symposium Conference Proceedings: Changing Times. New Opportunities. Are You Prepared?. (International SAMPE Symposium and Exhibition (Proceedings); vol. 54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon fibers
Fibers
Concurrent engineering
Structural design
Innovation
2 Citations (Scopus)

Development of Experiment-Based Mathematical Models of Acoustic Signals for Machine Condition Monitoring

Shaffer, D., Lorson, P., Plunkett, Z., Ragai, I., Danesh Yazdi, A. H. & Ashour, O., Jan 1 2018, In : Procedia CIRP. 72, p. 1316-1320 5 p.

Research output: Contribution to journalConference article

Condition monitoring
Machining
Acoustics
Mathematical models
Monitoring
1 Citation (Scopus)

Development of sustainable community paramedicine programmes: A case study in Pennsylvania

Huang, Y. H., Ma, L., Sabljak, L. A. & Puhala, Z. A., Jan 1 2018, In : Emergency Medicine Journal. 35, 6, p. 372-378 7 p.

Research output: Contribution to journalArticle

Conservation of Natural Resources
Delivery of Health Care
Reimbursement Mechanisms
Local Government
Program Development
1 Citation (Scopus)

Developments in pulsed and continuous wave laser welding technologies

Zhou, J. & Tsai, H. L., Jun 30 2013, Handbook of Laser Welding Technologies. Elsevier Inc., p. 103-138 36 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Continuous wave lasers
Laser beam welding
Metal melting
Plasma interactions
Electric arc welding
4 Citations (Scopus)
didactics
Students
Values
student
21 Citations (Scopus)

Die closing force in low pressure tube hydroforming

Nikhare, C., Weiss, M. & Hodgson, P. D., Nov 19 2010, In : Journal of Materials Processing Technology. 210, 15, p. 2238-2244 7 p.

Research output: Contribution to journalArticle

High strength steel
Analytical models
Plastics
Geometry
24 Citations (Scopus)

Dielectric investigation of the molecular dynamics in blends: polymers with similar molecular architecture (TMPC/PC blend)

Mansour, A. A. & Madbouly, S., Jan 1 1995, In : Polymer International. 36, 3, p. 269-277 9 p.

Research output: Contribution to journalArticle

polycarbonate
Polymer blends
Polycarbonates
Molecular dynamics
Relaxation time
22 Citations (Scopus)
polycarbonate
Polystyrenes
Polymer blends
Polycarbonates
Molecular dynamics

Dielectric spectroscopy for biorenewable plant oil-based polyurethane

Madbouly, S. A. & Kessler, M. R., Dec 22 2014, 2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2014. Institute of Electrical and Electronics Engineers Inc., p. 788-791 4 p. 6995821. (2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dielectric spectroscopy
Polyurethanes
Relaxation processes
Thin films
Thermosets

Differences in radial expansion force among inferior vena cava filter models support documented perforation rates

Robins, J. E., Ragai, I. & Yamaguchi, D. J., May 2018, In : Journal of Vascular Surgery: Venous and Lymphatic Disorders. 6, 3, p. 368-371 4 p.

Research output: Contribution to journalArticle

Vena Cava Filters
Venae Cavae
Platinum
Pulmonary Embolism
Software
25 Citations (Scopus)

Differential geometry and the forming of aligned fibre composites

Gutowski, T., Hoult, D., Dillon, G. & Gonzalez-Zugasti, J., 1991, In : Composites Manufacturing. 2, 3-4, p. 147-152 6 p.

Research output: Contribution to journalArticle

Geometry
Fibers
Composite materials
Computer aided design
Experiments
3 Citations (Scopus)

Diffractive optical propagation techniques for mixed-signal CAD tools

Kurzweg, T. P., Levitan, S. P., Martinez, J. A., Marchand, P. J. & Chiarulli, D. M., Jan 1 2000, In : Proceedings of SPIE - The International Society for Optical Engineering. 4089, p. 610-618 9 p.

Research output: Contribution to journalConference article

Light propagation
Computer-aided Design
computer aided design
Microsystems
Computer aided design
1 Citation (Scopus)

Digital photographic imaging using MOEMS

Nasis, V. T., Hicks, R. A. & Kurzweg, T., May 8 2006, Proceedings of SPIE - The International Society for Optical Engineering. 61140N. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6114).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
microoptoelectromechanical systems
Digital Imaging
High Resolution
Imaging

Digital signal processing in the undergraduate curriculum

Hemminger, T. L. & Ford, R. M., Dec 1 2002, In : ASEE Annual Conference Proceedings. p. 4953-4966 14 p.

Research output: Contribution to journalConference article

Digital signal processing
Curricula
Electrical engineering
Students
Spread spectrum communication
4 Citations (Scopus)
Charge density waves
Superconductivity
Intercalation
Crystals
Ions
1 Citation (Scopus)

Dimensionless Parameters as Design Guidelines for Sterilization of Dead‐Ended Tubes

Young, J. H. & Lasher, W. C., Jan 1 1995, In : Biotechnology progress. 11, 3, p. 312-317 6 p.

Research output: Contribution to journalArticle

Guidelines
Equipment Design
Bioreactors
Spores
Equipment and Supplies

Direct assessment of mechanics of materials learning with concept inventory

Sweeney, S., Englund, R. & Edwards, R., 2007, 2007 ASEE Annual Conference and Exposition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Direct assessment of mechanics of materials learning with concept inventory

Sweeney, S., Englund, R. & Edwards, R., Jan 1 2007, In : ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Contribution to journalConference article

Mechanics
7 Citations (Scopus)

Direct electric current spot treatment's effect on springback of 90 degree bent 2024-T3 aluminum

Ruszkiewicz, B. J., Scriva, C., Reese, Z. C., Nikhare, C. P., Roth, J. T. & Ragai, I., Jan 1 2015, Processing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric currents
Aluminum
Stamping
Metal forming
Sheet metal
4 Citations (Scopus)

Directionally independent failure prediction of end-mill cutting tools: An investigation of noise reduction using higher dimensional real fourier analysis

Suprock, C. A. & Roth, J. T., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Manufacturing. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Manufacturing Engineering Division, MED).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fourier analysis
Cutting tools
Noise abatement
Discrete cosine transforms
Dynamometers
3 Citations (Scopus)
Machining
Wear of materials
Discrete cosine transforms
Dynamometers
Fast Fourier transforms