• United States

Research Output 1978 2020

2006
22 Citations (Scopus)

Surface electromagnetic wave at a tilted uniaxial bicrystalline interface

Polo, J. A., Nelatury, S. & Lakhtakia, A., Dec 1 2006, In : Electromagnetics. 26, 8, p. 629-642 14 p.

Research output: Contribution to journalArticle

electromagnetic surface waves
Electromagnetic waves
Surface waves
surface waves
Wave propagation

Suspension component with internal mechanical resonator

Sweeney, S., Dec 1 2006.

Research output: Contribution to conferencePaper

Suspensions (components)
Resonators
Stiffness
Hydraulics
Fluids

The challenge of teaching blow molding in a university setting

Meckley, J., Jul 10 2006, p. 87-91. 5 p.

Research output: Contribution to conferencePaper

Blow molding
Teaching
Auxiliary equipment
Plastics industry
Molds

The interaction of downwind sails

Lasher, W. C., 2006, 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006. Vol. 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boats
Sailing vessels
Angle of attack
Aerodynamics
Computational fluid dynamics
1 Citation (Scopus)

The interaction of downwind sails

Lasher, W., Dec 1 2006, Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006. p. 263-272 10 p. (Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006; vol. 1 SYMPOSIA).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boats
Sailing vessels
Angle of attack
Aerodynamics
Computational fluid dynamics
94 Citations (Scopus)

Transfort phenomena and keyhole dynamics during pulsed laser welding

Zhou, J., Tsai, H. L. & Wang, P. C., Jul 1 2006, In : Journal of Heat Transfer. 128, 7, p. 680-690 11 p.

Research output: Contribution to journalArticle

laser welding
Laser beam welding
Pulsed lasers
pulsed lasers
Lasers
1 Citation (Scopus)

Using a course in computer-aided engineering to foster life-long learning

Lasher, W. C., 2006, 36th ASEE/IEEE Frontiers in Education Conference, FIE. 4116880

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer aided engineering
Students
Software packages
Numerical methods
13 Citations (Scopus)
Monitoring
Sensors
Cutting tools
Accelerometers
Machining
2007
6 Citations (Scopus)
IIR filters
Digital filters
Invariance
Textbooks
High pass filters
19 Citations (Scopus)

A high-order photon Monte Carlo method for radiative transfer in direct numerical simulation

Wu, Y., Modest, M. F. & Haworth, D. C., May 1 2007, In : Journal of Computational Physics. 223, 2, p. 898-922 25 p.

Research output: Contribution to journalArticle

Radiative transfer
Direct numerical simulation
direct numerical simulation
radiative transfer
Monte Carlo method
1 Citation (Scopus)

A microfabricated involute-foil regenerator for stirling engines

Tew, R., Ibrahim, M., Danila, D., Simon, T., Mantell, S., Sun, L., Gedeon, D., Kelly, K., McLean, J., Wood, G. & Qiu, S., Nov 6 2007, Collection of Technical Papers - 5th International Energy Conversion Engineering Conference. p. 326-350 25 p. (Collection of Technical Papers - 5th International Energy Conversion Engineering Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stirling engines
Regenerators
Metal foil
Oscillating flow
Engines
21 Citations (Scopus)
Repair
Software packages
Sensitivity analysis
Software engineering
Experiments
7 Citations (Scopus)

An aerodynamic analysis of the U.S. Brig Niagara

Lasher, W., Musho, T. D., McKee, K. C. & Rybka, W., Dec 1 2007, p. 185-197. 13 p.

Research output: Contribution to conferencePaper

Aerodynamics
Wind tunnels
Computational fluid dynamics
Ships
Experiments

Analysis of electromechanical oscillations and extended phase compensation design of power system stabilizer for bisotoun power plant

Parniani, M., Zafarabadi, G., Rasouli, M. & Ansarimehr, P., Dec 1 2007, In : Iranian Journal of Electrical and Computer Engineering. 6, 1, p. 11-18 8 p.

Research output: Contribution to journalArticle

Root loci
Transfer functions
Power plants
Torque
Tuning
2 Citations (Scopus)

Analysis of time-dependent cylindrical problems using Monte Carlo

Sadiku, M. N. O., Akujuobi, C. M., Musa, S. M. & Nelatury, S. R., Oct 1 2007, In : Microwave and Optical Technology Letters. 49, 10, p. 2571-2573 3 p.

Research output: Contribution to journalArticle

Monte Carlo method
Monte Carlo methods
Laplace equation
Poisson equation
11 Citations (Scopus)

Analysis of two-dimensional gage repeatability and reproducibility

Sweeney, S., Jan 1 2007, In : Quality Engineering. 19, 1, p. 29-37 9 p.

Research output: Contribution to journalArticle

Gages
Rigid rotors
Method of moments
Rotors
Specifications
4 Citations (Scopus)

Application of electromagnetic force in laser welding

Zhou, J. & Tsai, H. L., Jan 1 2007, Heat Transfer, Fluid Flows, and Thermal Systems. American Society of Mechanical Engineers (ASME), p. 1025-1030 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser beam welding
Welds
Welding
Lasers
Porosity
2 Citations (Scopus)

A user-oriented reliability modelling approach for web systems

Wang, W., Hemminger, T. L. & Tang, M. H., 2007, In : International Journal of Web Engineering and Technology. 3, 3, p. 288-306 19 p.

Research output: Contribution to journalArticle

Navigation
Flow graphs
1 Citation (Scopus)

Boosting-based learning agents for experience classification

Chen, P. C., Fan, X., Zhu, S. & Yen, J., Dec 1 2007, Proceedings - 2006 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (IAT 2006 Main Conference Proceedings), IAT'06. p. 385-388 4 p. 4052947. (Proceedings - 2006 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (IAT 2006 Main Conference Proceedings), IAT'06).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Decision making
Multi agent systems
Experiments
23 Citations (Scopus)
polycarbonate
Dielectric spectroscopy
Compatibilizers
Polypropylenes
Relaxation processes
16 Citations (Scopus)

CAD models for estimating the capacitance of a microstrip interconnect: Comparison and improvisation

Nelatury, S. R., Sadiku, M. N. O. & Devabhaktuni, V. K., 2007, Progress in Electromagnetics Research Symposium 2007, PIERS 2007 Prague. Electromagnetics Academy, p. 18-23 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer aided design
Capacitance
Microwaves
Engineers
Composite materials
3 Citations (Scopus)

Comparison of approximate formulas for the capacitance of microstrip line

Sadiku, M. N. O., Musa, S. M. & Nelatury, S. R., 2007, 2007 IEEE SoutheastCon. p. 427-432 6 p. 4147469

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstrip lines
Capacitance
Microwave frequencies
Computer aided design
Composite materials
1 Citation (Scopus)

Compressive superplastic behavior of 6Al-4V titanium caused by an applied DC current

Kronenberger, T. J., Warner, M. K. & Roth, J. T., Dec 28 2007, Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006. p. 13-20 8 p. (Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Current density
Electricity
Compression testing
Plastic flow
2 Citations (Scopus)

Controllability of magnetic manipulation of a few microparticles in fluids

Bhat, S., Guez, J., Kurzweg, T., Guez, A. & Friedman, G., Jun 1 2007, In : IEEE Transactions on Magnetics. 43, 6, p. 2427-2429 3 p.

Research output: Contribution to journalArticle

Controllability
Magnetic fields
Fluids
Control theory
Substrates
3 Citations (Scopus)

Coupled multifield finite element analysis model of upsetting under AN applied direct current

Kronenberger, T. J., Johnson, D. H. & Roth, J. T., Dec 31 2007, American Society of Mechanical Engineers. p. 949-958 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite element method
Heating
Mechanical properties
Electrons
Electricity
23 Citations (Scopus)

Crystallization kinetics of PHB/PVAc blends using time resolved dielectric spectroscopy

Madbouly, S. A., Mansour, A. A. & Abdou, N. Y., Sep 1 2007, In : European Polymer Journal. 43, 9, p. 3933-3942 10 p.

Research output: Contribution to journalArticle

Dielectric spectroscopy
Crystallization kinetics
Crystallization
crystallization
kinetics

Direct assessment of mechanics of materials learning with concept inventory

Sweeney, S., Englund, R. & Edwards, R., 2007, 2007 ASEE Annual Conference and Exposition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Direct assessment of mechanics of materials learning with concept inventory

Sweeney, S., Englund, R. & Edwards, R., Jan 1 2007, In : ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Contribution to journalConference article

Mechanics
5 Citations (Scopus)

Directionally independent failure prediction of end-milling tools during pocketing maneuvers

Suprock, C. A., Piazza, J. J. & Roth, J. T., Aug 1 2007, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 129, 4, p. 770-779 10 p.

Research output: Contribution to journalArticle

Discrete cosine transforms
Wear of materials
Dynamometers
Spectral resolution
Degrees of freedom (mechanics)
11 Citations (Scopus)

Effect of curing on the broadband dielectric spectroscopy of powder coating

Madbouly, S., Serag Eldin, A. F. & Mansour, A. A., Jun 1 2007, In : European Polymer Journal. 43, 6, p. 2462-2470 9 p.

Research output: Contribution to journalArticle

Dielectric spectroscopy
Powder coatings
curing
Curing
broadband
2 Citations (Scopus)

Effect of penetrator size on dynamic failure response of woven graphite epoxy composites around the critical perforation energy

Ojo, O. B., Wosu, S. N., Slaughter, W. & Onipede, O. O., Apr 1 2007, In : Journal of ASTM International. 4, 4

Research output: Contribution to journalArticle

Graphite epoxy composites
Graphite
Hazardous materials spills
Pressure
Strain rate
64 Citations (Scopus)

Effects of DC current on the mechanical behavior of AlMg1SiCu

Andrawes, J. S., Kronenberger, T. J., Perkins, T. A., Roth, J. T. & Warley, R. L., Jan 1 2007, In : Materials and Manufacturing Processes. 22, 1, p. 91-101 11 p.

Research output: Contribution to journalArticle

Aluminum
Mechanical properties
Tensile testing
Temperature
Electricity
75 Citations (Scopus)

Effects of electromagnetic force on melt flow and porosity prevention in pulsed laser keyhole welding

Zhou, J. & Tsai, H. L., Jun 1 2007, In : International Journal of Heat and Mass Transfer. 50, 11-12, p. 2217-2235 19 p.

Research output: Contribution to journalArticle

laser welding
Laser beam welding
Pulsed lasers
Liquid metals
pulsed lasers
2 Citations (Scopus)

Endmill condition monitoring and failure forecasting method for curvilinear cuts of non-constant radii

Suprock, C. A., Roth, J. T. & Downey, L. M., Dec 28 2007, American Society of Mechanical Engineers. p. 507-516 10 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition monitoring
Accelerometers
Sensors
Machining
Wear of materials

Extended Phase Compensation Design of Power System Stabilizer for Bisotoun Power Plant

Zafarabadi, G., Parniani, M., Rasouli, M. & Ansarimehr, P., Dec 1 2007, Power Plants and Power Systems Control 2006. Elsevier Ltd, p. 279-284 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Power plants
Damping
Tuning
Root loci
Transfer functions
6 Citations (Scopus)

Forming stretch broken carbon fiber composites into complex shapes

Dillon, G. P. & Stiver, D. H., Oct 1 2007, SAMPE '07: M and P - From Coast to Coast and Around the World; Conference Proceedings. (International SAMPE Symposium and Exhibition (Proceedings); vol. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon fibers
Composite materials
Fabrication
Fibers
Formability
12 Citations (Scopus)

Hardware architecture for nanorobot application in cerebral aneurysm

Cavalcanti Da Silva, A., Shirinzadeh, B., Fukuda, T. & Ikeda, S., Dec 1 2007, 2007 7th IEEE International Conference on Nanotechnology - IEEE-NANO 2007, Proceedings. p. 237-242 6 p. 4601179. (2007 7th IEEE International Conference on Nanotechnology - IEEE-NANO 2007, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanorobots
hardware
Nanorobotics
Hardware
Nanoelectronics
1 Citation (Scopus)

High definition television in detail

Sadiku, M. N. O. & Nelatury, S. R., Jan 1 2007, In : IEEE Potentials. 26, 1, p. 31-35 5 p.

Research output: Contribution to journalReview article

High definition television
television
Acoustic waves
Satellites
Television systems
4 Citations (Scopus)

High heat polycarbonates

Smith, G. F., Mahood, J., Pixton, M., Zerda, A. S. & Sanner, M. A., Sep 28 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 1150-1155 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polycarbonate
Polycarbonates
Resins
Copolymers
Flame resistance
1 Citation (Scopus)

Incorporating term selection into separable nonlinear least squares identification methods

Rasouli, M., Westwick, D. & Rosehart, W., Dec 1 2007, 2007 Canadian Conference on Electrical and Computer Engineering, CCECD. p. 892-895 4 p. 4232887

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical operators
Linear regression
Linear systems
4 Citations (Scopus)

Interactions of an antimicrobial peptide (Ac-RRWWRF-NH2) and surfactants: Towards antimicrobial peptide additives for coatings applications

Rhoades, A. M., Wicks, D. A., Miriyala, B. & Williamson, J., Feb 1 2007, In : Progress in Organic Coatings. 58, 2-3, p. 209-216 8 p.

Research output: Contribution to journalArticle

Surface-Active Agents
Peptides
Polymers
Surface active agents
Spoilage

Interfiber orientation and volume fraction effects in electronic composite boards

Khalilollahi, A. & Warley, R. L., 2007, American Society for Composites - 22nd Technical Conference of the American Society for Composites 2007 - Composites: Enabling a New Era in Civil Aviation. Vol. 1. p. 466-478 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Printed circuit boards
Volume fraction
Composite materials
Heat transfer coefficients
Materials properties

Investigation of transport phenomena in three-dimensional gas metal arc welding of thick metals

Zhou, J., Davoud, M. S. & Tsai, H. L., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 175-182 8 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

arc welding
Gas metal arc welding
Welds
Preheating
Metals

Involving non-engineering students with engineering students to enhance the learning experience

Meckley, J., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. Vol. 5. p. 2861-2863 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Railroad cars
Marketing
Display devices
Industry
9 Citations (Scopus)
polycarbonate
Crystallization kinetics
Polycarbonates
Crystallization
Chemical analysis

Manipulating the orientation at end of fill

Young, B., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. Vol. 5. p. 2596-2599 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molding
Plastics industry
Polymers
Gases
Welds
77 Citations (Scopus)

Manufacturing aspects relating to the effects of direct current on the tensile properties of metals

Ross, C. D., Irvin, D. B. & Roth, J. T., Apr 1 2007, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 129, 2, p. 342-347 6 p.

Research output: Contribution to journalArticle

tensile properties
Tensile properties
manufacturing
Metals
direct current
25 Citations (Scopus)

Medical nanorobot architecture based on nanobioelectronics

Cavalcanti, A., Shirinzadeh, B., Freitas, R. A. & Kretly, L. C., Dec 1 2007, In : Recent Patents on Nanotechnology. 1, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

Nanorobots
nanotechnology
patents
Nanotechnology
artificial intelligence
120 Citations (Scopus)

Metallic forging using electrical flow as an alternative to warm/hot working

Perkins, T. A., Kronenberger, T. J. & Roth, J. T., Feb 1 2007, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 129, 1, p. 84-94 11 p.

Research output: Contribution to journalArticle

Hot working
Forging
Electricity
Electromigration
Metals