• United States

Research Output 1978 2020

Filter
Paper
2019

A composition-morphology mapping of fumed silica filled polymer blends

Amoabeng, D., Young, B. A., Tempalski, A., Binks, B. P. & Velankar, S. S., Jan 1 2019.

Research output: Contribution to conferencePaper

Filled polymers
Polymer blends
Silicon Dioxide
Polyethylene oxides
Silica
Cationic polymerization
Crystallization kinetics
Compatibilizers
Thermosets
Crystallization
2018

Crystallization behavior of sheared polyamide 66

Rhoades, A. M., Gohn, A. M., Seo, J., Colby, R. & Androsch, R., Jan 1 2018.

Research output: Contribution to conferencePaper

Nylons
Crystallization
Polyamides
Optical microscopy
Nucleation

Expected functions and application of personal health records

Huang, Y. & Miksa, E., Jan 1 2018, p. 176-181. 6 p.

Research output: Contribution to conferencePaper

Health
Students
Feedback

Improving patient flow at a cardiology outpatient clinic

Bowers, N., Ashour, O. & Hocsman, J., Jan 1 2018, p. 695-700. 6 p.

Research output: Contribution to conferencePaper

Cardiology
Scheduling
Electrophysiology
Testing
Costs
2017

Processing characteristics of out-of-autoclave pre-impregnated discotex™ composites

Patten, C. H., Dillon, G. P. & Koudela, K. L., Jan 1 2017, p. 101-118. 18 p.

Research output: Contribution to conferencePaper

Autoclaves
Composite materials
Processing
Diaphragms
Carbon fibers
2016
2 Citations (Scopus)
Industrial engineering
Students
Logistics
Feedback
2014
4 Citations (Scopus)
Industrial engineering
Students
Engineering education
Curricula
Problem-Based Learning
5 Citations (Scopus)
Industrial engineering
Students
Engineering education
Education
5 Citations (Scopus)

Engineering economics as a general education course to expand quantitative and financial literacy

Wilck IV, J., Lynch, P. C. & Kauffmann, P. J., Jan 1 2014.

Research output: Contribution to conferencePaper

Education
Economics
Students
Finance
Product development
9 Citations (Scopus)

Mastery learning in engineering: A case study in statics

Sangelkar, S. C., Ashour, O., Warley, R. L. & Onipede, Jr., O., Jan 1 2014.

Research output: Contribution to conferencePaper

35 Citations (Scopus)

Precise semidefinite programming formulation of atomic norm minimization for recovering d-dimensional (D ≥ 2) off-the-grid frequencies

Xu, W., Cai, J. F., Mishra, K. V., Cho, M. M. & Kruger, A., Jan 1 2014.

Research output: Contribution to conferencePaper

Compressed sensing
Glossaries

Virtual joystick control of finch robot

Loker, D. R. & Strom, S. A., Jan 1 2014.

Research output: Contribution to conferencePaper

Robots
Students
Obstacle detectors
Requirements engineering
Engineering technology
2013
2 Citations (Scopus)

An Architecture for providing and defining student-oriented services

Ibrahim, N. I. & Khalil, I., Jan 1 2013, p. 28-33. 6 p.

Research output: Contribution to conferencePaper

Service oriented architecture (SOA)
Students
Cloud computing
Teaching
Specifications
2 Citations (Scopus)

Ergonomic risk reduction to enhance lean transformation

Aqlan, F., Lam, S. S., Testani, M. & Ramakrishnan, S., Jan 1 2013, p. 989-997. 9 p.

Research output: Contribution to conferencePaper

Ergonomics
Risk assessment
Servers
Stream flow
Standardization

Group technology-based patient grouping and prioritizing algorithm

Ashour, O. & Okudan Kremer, G. E., Jan 1 2013, p. 1512-1521. 10 p.

Research output: Contribution to conferencePaper

Group technology
Decision making
Discrete event simulation
Productivity
Processing

Neural networks, bayesian networks, and logistic regression for ESI prediction

Chonde, S., Nembhard, D., Okudan Kremer, G. E. & Ashour, O., Jan 1 2013, p. 1478-1487. 10 p.

Research output: Contribution to conferencePaper

Bayesian networks
Logistics
Neural networks
Blood pressure
Learning systems
1 Citation (Scopus)

ScriptEase II: Platform independent story creation using high-level patterns

Schenk, K., Lari, A., Church, M., Graves, E., Duncan, J., Miller, R., Desai, N., Zhao, R., Szafron, D., Carbonaro, M. & Schaeffer, J., Jan 1 2013, p. 170-176. 7 p.

Research output: Contribution to conferencePaper

Drag
Engines
Industry
Code generation
2012

Discrete event simulation analysis to compare emergency severity index and FAHP-MAUT triage algorithms

Ashour, O. M., Okudan Kremer, G. E. & Medeiros, D. J., Jan 1 2012, p. 2326-2333. 8 p.

Research output: Contribution to conferencePaper

Analytic hierarchy process
Discrete event simulation
1 Citation (Scopus)

Exploration of group technology applications: Triage in the emergency department

Ashour, O., Silvera, G., Okudan Kremer, G. E. & Reddy, M., Jan 1 2012, p. 2334-2343. 10 p.

Research output: Contribution to conferencePaper

Group technology
Productivity
Decision making

Prioritizing customer orders in a high-end server manufacturing environment using artificial neural networks

Aqlan, F., Lam, S. S. & Martinez, K., Jan 1 2012, p. 1227-1234. 8 p.

Research output: Contribution to conferencePaper

Analytic hierarchy process
Servers
Scheduling
Neural networks
Turnaround time
1 Citation (Scopus)

Process flow development for a state-wide research permissions management system

Chalil Madathil, K., Huang, Y., Koikkara, R. & Gramopadhye, A., Jan 1 2012, p. 3709-3715. 7 p.

Research output: Contribution to conferencePaper

Storage management
Electronic medical equipment
HTML
Health care
Testing
2011

Developing a correction factor to modify the FAHP and utility theory based triage algorithm

Ashour, O. & Okudan, G. E., Jan 1 2011.

Research output: Contribution to conferencePaper

Analytic hierarchy process
Decision making
1 Citation (Scopus)

Lateral vibration prediction of drivelines having a flexible coupling

Sweeney, S., Dec 1 2011.

Research output: Contribution to conferencePaper

Flexible couplings
Universal joints
Natural frequencies
Flywheels
Stiffness
2010
2 Citations (Scopus)

An improved triage algorithm for emergency departments based on fuzzy AHP and utility theory

Ashour, O. M., Okudan, G. E. & Smith, C. A., Jan 1 2010.

Research output: Contribution to conferencePaper

Analytic hierarchy process
Decision making
Productivity
X rays
2009
4 Citations (Scopus)

Assessing the wind-heel angle relationship of traditionally-rigged sailing vessels

Lasher, W. C., Tinlin, D. R., Johnson, B., Womack, J., Miles, J. C., Rybka, W. & Heerssen, W., Dec 1 2009, p. 125-142. 18 p.

Research output: Contribution to conferencePaper

Sailing vessels
Computational fluid dynamics
Dynamic models
Ships
Computer simulation
2008
1 Citation (Scopus)

Experimental and numerical evaluation of forming and fracture behaviour of High Strength Steel

Nikhare, C., Marcondes, P. V., Weiss, M. & Hodgson, P. D., Dec 1 2008, p. 1001-1014. 14 p.

Research output: Contribution to conferencePaper

Steel
High strength steel
Formability
Iron and steel industry
Numerical methods
2007
7 Citations (Scopus)

An aerodynamic analysis of the U.S. Brig Niagara

Lasher, W., Musho, T. D., McKee, K. C. & Rybka, W., Dec 1 2007, p. 185-197. 13 p.

Research output: Contribution to conferencePaper

Aerodynamics
Wind tunnels
Computational fluid dynamics
Ships
Experiments
1 Citation (Scopus)
Flexible couplings
Engines
2006

An innovative approach to involve grade school students in college projects

Meckley, J. & Lenhardt, L. A., Jul 10 2006, p. 2437-2441. 5 p.

Research output: Contribution to conferencePaper

Students
Railroad cars
4 Citations (Scopus)

Directionally independent failure prediction of end-milling tools during pocketing maneuvers

Suprock, C. A., Piazza, J. J. & Roth, J. T., Nov 28 2006.

Research output: Contribution to conferencePaper

Discrete cosine transforms
Wear of materials
Dynamometers
Spectral resolution
Degrees of freedom (mechanics)
5 Citations (Scopus)

Effect of DC current on the formability of 6AL 4V titanium

Ross, C. D., Kronenberger, T. J. & Roth, J. T., Nov 28 2006.

Research output: Contribution to conferencePaper

Formability
Titanium
Current density
Heating
Testing
2 Citations (Scopus)

Effect of preparation method on the rheological behavior of waterborne polyurethane disperswion

Madbouly, S., Otaigbe, J. U., Nanda, A. K. & Wicks, D. A., Jul 10 2006, p. 2366-2370. 5 p.

Research output: Contribution to conferencePaper

Polyurethanes
Dispersions
Liquids
Acetone
Phase separation

Effect of surface processes on high-cycle fatigue life of titanium alloys

Sweeney, S. & Berlin, M. B., Dec 1 2006.

Research output: Contribution to conferencePaper

Blasting
Titanium alloys
Etching
Abrasives
Fatigue of materials

Suspension component with internal mechanical resonator

Sweeney, S., Dec 1 2006.

Research output: Contribution to conferencePaper

Suspensions (components)
Resonators
Stiffness
Hydraulics
Fluids

The challenge of teaching blow molding in a university setting

Meckley, J., Jul 10 2006, p. 87-91. 5 p.

Research output: Contribution to conferencePaper

Blow molding
Teaching
Auxiliary equipment
Plastics industry
Molds
2005

An examination into the effects of a fluoropolymer additive in nylon 6/6 neat injection molding resins

Meckley, J., Dec 1 2005, p. 368-372. 5 p.

Research output: Contribution to conferencePaper

Fluorine containing polymers
Injection molding
Resins
Physical properties
Processing
40 Citations (Scopus)

Efficient function approximation using truncated multipliers and squarers

Walters, E. G. & Schulte, M. J., Dec 1 2005, p. 232-239. 8 p.

Research output: Contribution to conferencePaper

Function Approximation
Multiplier
Specification
Chebyshev Series
Specifications
1 Citation (Scopus)

Experimental investigation of springback of dual-phase steels

Ragai, I. & Nemes, J., Dec 1 2005.

Research output: Contribution to conferencePaper

Steel
Anisotropy
Experiments
Steel sheet
Automotive industry

Nanostructured polymer blends prepared via in situ polymerization and compatibilization: Processing, morphology and crystallization behavior

Madbouly, S., Rhoades, D. & Otaigbe, J., Dec 1 2005, p. 335-339. 5 p.

Research output: Contribution to conferencePaper

Compatibilizers
Polymer blends
Polypropylenes
Crystallization
Polymerization

Reduction of rotating imbalance measurement variation resulting from test apparatus redesign

Sweeney, S. & Fisher, K. J., Dec 1 2005, p. 427-434. 8 p.

Research output: Contribution to conferencePaper

Students
Rotors
Powertrains
Statistical methods
Testing
2 Citations (Scopus)

Thermal reliability design and optimization for multilayer composite electronic boards

Khalilollahi, A., Qnipede, O. & Warley, R. L., Jan 1 2005, p. 845-851. 7 p.

Research output: Contribution to conferencePaper

Multilayers
Composite materials
Fiber reinforced materials
Heat transfer coefficients
Temperature distribution
2004

A hands-on navigation technology workshop to support the math options for girls program

Gray, R. & Hemminger, T. L., Nov 22 2004, p. 250-256. 7 p.

Research output: Contribution to conferencePaper

Technical presentations
Navigation
Students
science
engineering science

Computer modeling of gas permeation in flexible packages

Koch, P. E., Young, B. & Alabran, M. W., Jun 1 2004, p. 1086-1090. 5 p.

Research output: Contribution to conferencePaper

Permeation
Gases
Moisture
Mass transfer
Oxygen
6 Citations (Scopus)

Effectiveness of the cryogenic treatment of tungsten carbide inserts on tool wear when in full production operations

Arner, K. A., Agosti, C. D. & Roth, J. T., Dec 1 2004, p. 31-40. 10 p.

Research output: Contribution to conferencePaper

Tungsten carbide
Cryogenics
Wear of materials
Cutting tools
Carbides
1 Citation (Scopus)

Melt flow and porosity formation in pulsed laser keyhole welding

Zhou, J., Tsai, H. L., Wang, P. C. & Menassa, R., Dec 1 2004, p. 1065-1073. 9 p.

Research output: Contribution to conferencePaper

Laser beam welding
Pulsed lasers
Solidification
Laser modes
Porosity
6 Citations (Scopus)

Nanorobotics control design: A practical approach tutorial

Cavalcanti, A., Freitas, R. A. & Kretly, L. C., Dec 1 2004, p. 95-104. 10 p.

Research output: Contribution to conferencePaper

Nanorobotics
Collective Behavior
Control Design
Automation
Nanomedicine

Predictive modeling of permeation for flexible packaging applications using finite element analysis

Calvo, W. J., Young, B. A. & Koch, P. E., Dec 1 2004, p. 531-555. 25 p.

Research output: Contribution to conferencePaper

Permeation
Packaging
Finite element method
2003
1 Citation (Scopus)

Analysis and discussion of diesel engine powertrain torsional resonance during start-up

Sweeney, S., Dec 1 2003.

Research output: Contribution to conferencePaper

Powertrains
Diesel engines
Flexible couplings
Engines
Damping
2 Citations (Scopus)

Artificially Balancing Geometrically Balanced Runner Systems

Boell, K., Beaumont, J. & Young, B., Oct 14 2003, p. 430-434. 5 p.

Research output: Contribution to conferencePaper

Injection molding
Temperature