• United States

Research Output

Filter
Article
2017
11 Scopus citations

The effect of supercooling of the melt on the semicrystalline morphology of PA 66

Gohn, A. M., Rhoades, A. M., Wonderling, N. M., Tighe, T. B. & Androsch, R., Sep 10 2017, In : Thermochimica Acta. 655, p. 313-318 6 p.

Research output: Contribution to journalArticle

17 Scopus citations
2018
1 Scopus citations

A location-inventory supply chain network model using two heuristic algorithms for perishable products with fuzzy constraints

Dai, Z., Aqlan, F., Zheng, X. & Gao, K., May 2018, In : Computers and Industrial Engineering. 119, p. 338-352 15 p.

Research output: Contribution to journalArticle

14 Scopus citations

Analysis of hole expansion limit through biaxial test

Nikhare, C. P., Jan 1 2018, In : Materials Today: Proceedings. 5, 1, p. 44-50 7 p.

Research output: Contribution to journalArticle

Angle-dependent magnetoresistance as a sensitive probe of the charge density wave in quasi-one-dimensional semimetal Ta 2 NiSe 7

He, J., Wen, L., Wu, Y., Liu, J., Tang, G., Yang, Y., Xing, H., Mao, Z., Sun, H. & Liu, Y., 2018, In : Applied Physics Letters. 113, 19

Research output: Contribution to journalArticle

Application of multiobjective neural predictive control to biventricular assistance using dual rotary blood pumps

Ng, B. C., Salamonsen, R. F., Gregory, S. D., Stevens, M. C., Wu, Y., Mansouri, M., Lovell, N. H. & Lim, E., Jan 2018, In : Biomedical Signal Processing and Control. 39, p. 81-93 13 p.

Research output: Contribution to journalArticle

2 Scopus citations

Computable performance guarantees for compressed sensing matrices

Cho, M., Vijay Mishra, K. & Xu, W., Dec 1 2018, In : Eurasip Journal on Advances in Signal Processing. 2018, 1, 16.

Research output: Contribution to journalArticle

Open Access
3 Scopus citations

Crystallization of polyamide 11 during injection molding

Jariyavidyanont, K., Williams, J. L., Rhoades, A. M., Kühnert, I., Focke, W. & Androsch, R., Jul 2018, In : Polymer Engineering and Science. 58, 7, p. 1053-1061 9 p.

Research output: Contribution to journalArticle

9 Scopus citations

Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect

Yan, Z., Wang, D., He, X., Wang, W., Zhang, H., Dong, P., Li, C., Li, Y., Zhou, J., Liu, Z. & Sun, L., Apr 18 2018, In : Materials Science and Engineering A. 723, p. 212-220 9 p.

Research output: Contribution to journalArticle

8 Scopus citations
2 Scopus citations

Development of sustainable community paramedicine programmes: A case study in Pennsylvania

Huang, Y. H., Ma, L., Sabljak, L. A. & Puhala, Z. A., Jan 1 2018, In : Emergency Medicine Journal. 35, 6, p. 372-378 7 p.

Research output: Contribution to journalArticle

2 Scopus citations

Differences in radial expansion force among inferior vena cava filter models support documented perforation rates

Robins, J. E., Ragai, I. & Yamaguchi, D. J., May 2018, In : Journal of Vascular Surgery: Venous and Lymphatic Disorders. 6, 3, p. 368-371 4 p.

Research output: Contribution to journalArticle

Effect of Melt-Memory on the Crystal Polymorphism in Molded Isotactic Polypropylene

Gohn, A. M., Rhoades, A. M., Okonski, D. & Androsch, R., Aug 2018, In : Macromolecular Materials and Engineering. 303, 8, 1800148.

Research output: Contribution to journalArticle

4 Scopus citations

Electron mass enhancement and magnetic phase separation near the Mott transition in double-layer ruthenates

Peng, J., Gu, X. M., Zhou, G. T., Wang, W., Liu, J. Y., Wang, Y., Mao, Z. Q., Wu, X. S. & Dong, S., 2018, In : Frontiers of Physics. 13, 4

Research output: Contribution to journalArticle

1 Scopus citations
2 Scopus citations
2 Scopus citations
3 Scopus citations

Investigation of Interface Bonding Mechanism of an Explosively Welded Tri-Metal Titanium/Aluminum/Magnesium Plate by Nanoindentation

Zhang, T. T., Wang, W. X., Zhou, J., Cao, X. Q., Yan, Z. F., Wei, Y. & Zhang, W., Apr 1 2018, In : JOM. 70, 4, p. 504-509 6 p.

Research output: Contribution to journalArticle

6 Scopus citations

Investigation of the feasibility of using microphone arrays in monitoring machining conditions

Shaffer, D., Ragai, I., Danesh-Yazdi, A. & Loker, D., Jan 2018, In : Manufacturing Letters. 15, p. 132-134 3 p.

Research output: Contribution to journalArticle

1 Scopus citations

Isothermal Flow-Induced Crystallization of Polyamide 66 Melts

Seo, J., Takahashi, H., Nazari, B., Rhoades, A. M., Schaake, R. P. & Colby, R. H., Jun 12 2018, In : Macromolecules. 51, 11, p. 4269-4279 11 p.

Research output: Contribution to journalArticle

3 Scopus citations

Maximum power, optimal load, and impedance analysis of piezoelectric vibration energy harvesters

Liao, Y. & Liang, J., Jun 22 2018, In : Smart Materials and Structures. 27, 7, 075053.

Research output: Contribution to journalArticle

16 Scopus citations

Microstructural characterization of laser micro-welded Nitinol wires

Dong, P., Li, H., Wang, W. & Zhou, J., Jan 2018, In : Materials Characterization. 135, p. 40-45 6 p.

Research output: Contribution to journalArticle

6 Scopus citations

Microstructure and corrosion resistance of laser-welded crossed nitinol wires

Dong, P., Yao, R., Yan, Z., Yan, Z., Wang, W., He, X. & Zhou, J., May 18 2018, In : Materials. 11, 5, 842.

Research output: Contribution to journalArticle

1 Scopus citations

Microstructure and mechanical properties of Ni-Cr-Si-B-Fe composite coating fabricated through laser additive manufacturing

Chang, Z., Wang, W., Ge, Y., Zhou, J. & Cui, Z., May 30 2018, In : Journal of Alloys and Compounds. 747, p. 401-407 7 p.

Research output: Contribution to journalArticle

6 Scopus citations

Microstructure evolution and mechanical properties of an AA6061/AZ31B alloy plate fabricated by explosive welding

Zhang, T., Wang, W., Zhang, W., Wei, Y., Cao, X., Yan, Z. & Zhou, J., Feb 25 2018, In : Journal of Alloys and Compounds. 735, p. 1759-1768 10 p.

Research output: Contribution to journalArticle

16 Scopus citations

Microstructure evolution and mechanical properties of B4C/6061Al neutron absorber composite sheets fabricated by powder metallurgy

Chen, H. S., Wang, W. X., Nie, H. H., Zhou, J., Li, Y. L., Liu, R. F., Zhang, Y. Y. & Zhang, P., Jan 5 2018, In : Journal of Alloys and Compounds. 730, p. 342-351 10 p.

Research output: Contribution to journalArticle

23 Scopus citations

Model-based analysis of thermal and geometrical effects in a microscale methanol fuel cell

Hollinger, A. S., Doleiden, D. G., Willis, M. G., DeLaney, S. C., Burbules, M. B., Miller, K. L. & Argun, N., Mar 8 2018, In : International Journal of Hydrogen Energy. 43, 10, p. 5145-5152 8 p.

Research output: Contribution to journalArticle

1 Scopus citations

Numerical analysis on the effect of thickness on biaxial tension limits0

Nikhare, C. P., Jan 1 2018, In : Materials Today: Proceedings. 5, 1, p. 37-43 7 p.

Research output: Contribution to journalArticle

1 Scopus citations

Optimal design of wind farm layout using a biogeographical based optimization algorithm

Pouraltafi-kheljan, S., Azimi, A., Mohammadi-ivatloo, B. & Rasouli, M., Nov 10 2018, In : Journal of Cleaner Production. 201, p. 1111-1124 14 p.

Research output: Contribution to journalArticle

5 Scopus citations

Optimal power, power limit and damping of vibration based piezoelectric power harvesters

Liao, Y. & Sodano, H., Jun 22 2018, In : Smart Materials and Structures. 27, 7, 075057.

Research output: Contribution to journalArticle

10 Scopus citations

Prioritizing process improvement initiatives in manufacturing environments

Aqlan, F. & Al-Fandi, L., Feb 2018, In : International Journal of Production Economics. 196, p. 261-268 8 p.

Research output: Contribution to journalArticle

21 Scopus citations

Ratcheting strain and microstructure evolution of AZ31B magnesium alloy under a tensile-tensile cyclic loading

Yan, Z., Wang, D., Wang, W., Zhou, J., He, X., Dong, P., Zhang, H. & Sun, L., Mar 28 2018, In : Materials. 11, 4, 513.

Research output: Contribution to journalArticle

2 Scopus citations

Sensitivity of Polymer Crystallization to Shear at Low and High Supercooling of the Melt

Rhoades, A. M., Gohn, A. M., Seo, J., Androsch, R. & Colby, R. H., Apr 24 2018, In : Macromolecules. 51, 8, p. 2785-2795 11 p.

Research output: Contribution to journalArticle

4 Scopus citations

Signature of quantum Griffiths singularity state in a layered quasi-one-dimensional superconductor

Zhang, E., Zhi, J., Zou, Y-C., Ye, Z., Ai, L., Shi, J., Huang, C., Liu, S., Lin, Z., Zheng, X., Kang, N., Xu, H., Wang, W., He, L., Zou, J., Liu, J., Mao, Z. & Xiu, F., 2018, In : Nature communications. 9, 1

Research output: Contribution to journalArticle

2 Scopus citations

Standard tables of truncated standard normal distribution using a new summarizing method

Hamasha, M. M., Al-Rabayah, M. & Aqlan, F., Jan 1 2018, In : World Journal of Engineering. 15, 2, p. 216-247 32 p.

Research output: Contribution to journalArticle

The dynamic properties of B4C/6061Al neutron absorber composites fabricated by power metallurgy

Chen, H., Wang, W., Nie, H., Zhou, J., Li, Y. & Zhang, P., Mar 24 2018, In : Materials Science and Technology (United Kingdom). 34, 5, p. 504-512 9 p.

Research output: Contribution to journalArticle

3 Scopus citations

The Fabrication and Characterization of a TiB2/Ni Composite Using Spark Plasma Sintering

Wang, M., Wang, W. X., Zhou, J., Chen, H. S. & Chang, Z. X., Oct 1 2018, In : Transactions of the Indian Institute of Metals. 71, 10, p. 2349-2360 12 p.

Research output: Contribution to journalArticle

1 Scopus citations

The microstructure and mechanical properties of the B4C/Cu matrix composite fabricated by SPS-HR

Chen, H. S., Zhang, Y. Y., Nie, H. H., Wang, J. F., Wang, W. X., Zhou, J. & Zhang, P., Aug 13 2018, In : Materials Science and Technology (United Kingdom). 34, 12, p. 1460-1467 8 p.

Research output: Contribution to journalArticle

3 Scopus citations

Using LEGO kits to teach higher level problem solving skills in system dynamics: A case study

Wu, Y., de Vries, C. & Dunsworth, Q., Mar 1 2018, In : Advances in Engineering Education. 6, 3, p. 1-20 20 p.

Research output: Contribution to journalArticle

3 Scopus citations

Yield identification by passing an electric current

Nikhare, C. P. & Lester, S. R., Jan 1 2018, In : Materials Today: Proceedings. 5, 1, p. 897-903 7 p.

Research output: Contribution to journalArticle

2019

A contemporary review of the applications of nature-inspired algorithms for optimal design of automatic generation control for multi-area power systems

Kalavani, F., Zamani-Gargari, M., Mohammadi-Ivatloo, B. & Rasouli, M., Feb 15 2019, In : Artificial Intelligence Review. 51, 2, p. 187-218 32 p.

Research output: Contribution to journalArticle

3 Scopus citations

A novel neutron shielding AA6061/ B4C laminar composite fabricated by powder metallurgy:“SPS-HER”

Chen, H., Nie, H., Wang, W., Zhou, J. & Liu, R., Oct 25 2019, In : Journal of Alloys and Compounds. 806, p. 1445-1452 8 p.

Research output: Contribution to journalArticle

A two-phase method for multi-echelon location-routing problems in supply chains

Dai, Z., Aqlan, F., Gao, K. & Zhou, Y., Jan 2019, In : Expert Systems With Applications. 115, p. 618-634 17 p.

Research output: Contribution to journalArticle

8 Scopus citations

Developing high performance PA 11/cellulose nanocomposites for industrial-scale melt processing

Venkatraman, P., Gohn, A. M., Rhoades, A. M. & Foster, E. J., Oct 1 2019, In : Composites Part B: Engineering. 174, 106988.

Research output: Contribution to journalArticle

2 Scopus citations
5 Scopus citations
4 Scopus citations

Efficacy investigation of virtual reality teaching module in manufacturing system design course

Ma, J., Jaradat, R., Ashour, O., Hamilton, M., Jones, P. & Dayarathna, V. L., Jan 1 2019, In : Journal of Mechanical Design, Transactions Of the ASME. 141, 1, 012002.

Research output: Contribution to journalArticle