• United States

Research Output 1978 2020

Filter
Article
2016
3 Citations (Scopus)

Crystal orientation evolution of friction stir welding of 2024/7075 dissimilar aluminum alloys

Zhou, J., Zhang, J. & Ji, P., Aug 25 2016, In : Hanjie Xuebao/Transactions of the China Welding Institution. 37, 8, p. 59-62 4 p.

Research output: Contribution to journalArticle

Friction stir welding
Crystal orientation
Aluminum alloys
Textures
Heat affected zone
19 Citations (Scopus)

Dynamic patient grouping and prioritization: a new approach to emergency department flow improvement

Ashour, O. & Okudan Kremer, G. E., Jan 1 2016, In : Health Care Management Science. 19, 2, p. 192-205 14 p.

Research output: Contribution to journalArticle

Triage
Hospital Emergency Service
Emergencies
Information Systems
Length of Stay
18 Citations (Scopus)

Effect of cooling rate on crystal polymorphism in beta-nucleated isotactic polypropylene as revealed by a combined WAXS/FSC analysis

Rhoades, A. M., Wonderling, N., Gohn, A., Williams, J., Mileva, D., Gahleitner, M. & Androsch, R., May 4 2016, In : Polymer. 90, p. 67-75 9 p.

Research output: Contribution to journalArticle

Polypropylenes
Calorimetry
Polymorphism
X ray scattering
Cooling

Effect of shoulder diameter on microstructure of dissimilar Al alloys friction stir welding joint

Zhang, J., Ji, P., Zhou, J. & Lian, Y., Nov 25 2016, In : Hanjie Xuebao/Transactions of the China Welding Institution. 37, 11, p. 51-54 4 p.

Research output: Contribution to journalArticle

Friction stir welding
Microhardness
Heat affected zone
Microstructure
Welds
15 Citations (Scopus)

Flow-Induced Crystallization of PEEK: Isothermal Crystallization Kinetics and Lifetime of Flow-Induced Precursors during Isothermal Annealing

Nazari, B., Rhoades, A. M., Schaake, R. P. & Colby, R. H., Jul 19 2016, In : ACS Macro Letters. 5, 7, p. 849-853 5 p.

Research output: Contribution to journalArticle

Isothermal annealing
Polyether ether ketones
Crystallization kinetics
Crystallization
Rheology
3 Citations (Scopus)

Intrinsic instability of thin liquid films on nanostructured surfaces

Sun, L., Hu, H., Rokoni, A. A. & Sun, Y., Sep 12 2016, In : Applied Physics Letters. 109, 11, 111601.

Research output: Contribution to journalArticle

liquids
film thickness
evaporation
thin films
wettability
11 Citations (Scopus)

Length-scale dependence of variability in epoxy modulus extracted from composite prepreg

Sanei, S. H. R. & Fertig, R. S., Apr 1 2016, In : Polymer Testing. 50, p. 297-300 4 p.

Research output: Contribution to journalArticle

Indentation
Composite materials
Nanoindentation
Composite structures
Materials properties
15 Citations (Scopus)

On the origin of indentation size effects and depth dependent mechanical properties of elastic polymers

Han, C. S., Sanei, S. H. R. & Alisafaei, F., Jan 1 2016, In : Journal of Polymer Engineering. 36, 1, p. 103-111 9 p.

Research output: Contribution to journalArticle

Indentation
Polymers
Mechanical properties
Elastic moduli
Metals
32 Citations (Scopus)

On the Use of Knitted Antennas and Inductively Coupled RFID Tags for Wearable Applications

Patron, D., Mongan, W., Kurzweg, T. P., Fontecchio, A., Dion, G., Anday, E. K. & Dandekar, K. R., Dec 2016, In : IEEE Transactions on Biomedical Circuits and Systems. 10, 6, p. 1047-1057 11 p., 7458913.

Research output: Contribution to journalArticle

Open Access
Radio frequency identification (RFID)
Antennas
Monitoring
Sensors
Stretching
7 Citations (Scopus)

Optimized linear, quadratic and cubic interpolators for elementary function hardware implementations

Sadeghian, M., Stine, J. E. & George Walters, E., Apr 8 2016, In : Electronics. 5, 2

Research output: Contribution to journalArticle

Table lookup
Hardware
12 Citations (Scopus)

Parametric analysis of fluidic energy harvesters in grid turbulence

Danesh Yazdi, A. H., Elvin, N. & Andreopoulos, Y., Jan 1 2016, In : Journal of Intelligent Material Systems and Structures. 27, 20, p. 2757-2773 17 p.

Research output: Contribution to journalArticle

Harvesters
Fluidics
Turbulence
Electromechanical coupling
Anemometers
2 Citations (Scopus)

Plenoptic ophthalmoscopy: A novel imaging technique

Adam, M. K., Aenchbacher, W., Kurzweg, T. & Hsu, J., Nov 1 2016, In : Ophthalmic Surgery Lasers and Imaging Retina. 47, 11, p. 1038-1043 6 p.

Research output: Contribution to journalArticle

Ophthalmoscopy
Light
Mydriatics
Macular Degeneration
Retinal Detachment
3 Citations (Scopus)

Recommendations for health information technology implementation in rural hospitals

Huang, Y. H. & Gramopadhye, A. K., May 9 2016, In : International Journal of Health Care Quality Assurance. 29, 4, p. 454-474 21 p.

Research output: Contribution to journalArticle

Rural Hospitals
Medical Informatics
Health Information Systems
Pharmaceutical Preparations
Delivery of Health Care
6 Citations (Scopus)

Remote equipment security in cloud manufacturing systems

Buckholtz, B., Ragai, I. & Wang, L., Jan 1 2016, In : International Journal of Manufacturing Research. 11, 2, p. 126-143 18 p.

Research output: Contribution to journalArticle

Telecontrol equipment
Manufacturing
Mathematical operators
Internet of Things
Communication
1 Citation (Scopus)
Residual stresses
Welds
Friction
Crystals
Friction stir welding
2 Citations (Scopus)

Self-Metathesis of 10-Undecen-1-Ol with Ru-Amine-Based Complex for Preparing the Soft Segment and Chain Extender of Novel Castor Oil-Based Polyurethanes

Fonseca, L. R., Bergman, J. A., Kessler, M. R., Madbouly, S. A. & Lima-Neto, B. S., Oct 1 2016, In : Macromolecular Symposia. 368, 1, p. 30-39 10 p.

Research output: Contribution to journalArticle

castor oil
Castor Oil
Polyurethanes
metathesis
Amines
1 Citation (Scopus)

Software architecture and framework for Programmable Logic Controllers: A case study and suggestions for research

Walters, E. G. & Bryla, E. J., Jun 1 2016, In : Machines. 4, 2, 13.

Research output: Contribution to journalArticle

Programmable Logic Controller
Software architecture
Software Architecture
Programmable logic controllers
Software
24 Citations (Scopus)

Supercooling-controlled heterogeneous and homogenous crystal nucleation of polyamide 11 and its effect onto the crystal/mesophase polymorphism

Rhoades, A. M., Wonderling, N., Schick, C. & Androsch, R., Dec 5 2016, In : Polymer. 106, p. 29-34 6 p.

Research output: Contribution to journalArticle

Supercooling
Nylons
Crystallization
Polymorphism
Polyamides
34 Citations (Scopus)

Supply chain optimization under risk and uncertainty: A case study for high-end server manufacturing

Aqlan, F. & Lam, S. S., Mar 1 2016, In : Computers and Industrial Engineering. 93, p. 78-87 10 p.

Research output: Contribution to journalArticle

Supply chains
Servers
Profitability
Multiobjective optimization
Application programs
33 Citations (Scopus)

The design, microstructure and mechanical properties of B4C/6061Al neutron absorber composites fabricated by SPS

Chen, H. S., Wang, W. X., Li, Y. L., Zhou, J., Nie, H. H. & Wu, Q. C., Mar 15 2016, In : Materials and Design. 94, p. 360-367 8 p.

Research output: Contribution to journalArticle

Spark plasma sintering
Neutrons
Mechanical properties
Microstructure
Composite materials
1 Citation (Scopus)

The FINS Framework: Design and Implementation of the Flexible Internetwork Stack (FINS) Framework

Reed, J. M., Abdallah, A. S., Thompson, M. S., MacKenzie, A. B. & DaSilva, L. A., Feb 1 2016, In : IEEE Transactions on Mobile Computing. 15, 2, p. 489-502 14 p., 7061520.

Research output: Contribution to journalArticle

Network protocols
Slate
Network layers
Network architecture
Experiments
1 Citation (Scopus)
Diffusion in gases
Contact resistance
Electrolytes
Fuel cells
Polymers
17 Citations (Scopus)

Understanding the spark plasma sintering from the view of materials joining

Dong, P., Wang, Z., Wang, W., Chen, S. & Zhou, J., Oct 1 2016, In : Scripta Materialia. 123, p. 118-121 4 p.

Research output: Contribution to journalArticle

Spark plasma sintering
sparks
Joining
sintering
welding
7 Citations (Scopus)

User-oriented cloud resource scheduling with feedback integration

Ding, D., Fan, X. & Luo, S., Aug 1 2016, In : Journal of Supercomputing. 72, 8, p. 3114-3135 22 p.

Research output: Contribution to journalArticle

Resource Scheduling
Scheduling
Feedback
Resources
Relevance Feedback
2017
9 Citations (Scopus)

10B areal density: A novel approach for design and fabrication of B4C/6061Al neutron absorbing materials

Li, Y., Wang, W., Zhou, J., Chen, H. & Zhang, P., Apr 15 2017, In : Journal of Nuclear Materials. 487, p. 238-246 9 p.

Research output: Contribution to journalArticle

Neutrons
Shielding
neutrons
Fabrication
fabrication
14 Citations (Scopus)

A composition-morphology map for particle-filled blends of immiscible thermoplastic polymers

Amoabeng, D., Roell, D., Clouse, K. M., Young, B. A. & Velankar, S. S., Jun 16 2017, In : Polymer. 119, p. 212-223 12 p.

Research output: Contribution to journalArticle

Polyethylene oxides
Thermoplastics
Polymers
Chemical analysis
Silicon Dioxide
1 Citation (Scopus)

An approach for rush order acceptance decisions using simulation and multi-attribute utility theory

Aqlan, F., Ahmed, A., Ashour, O., Shamsan, A. & Hamasha, M. M., Jan 1 2017, In : European Journal of Industrial Engineering. 11, 5, p. 613-630 18 p.

Research output: Contribution to journalArticle

Customer satisfaction
Discrete event simulation
Profitability
Raw materials
Industry
3 Citations (Scopus)

An ergonomic study of body motions during Muslim prayer using digital human modelling

Aqlan, F., Ahmed, A., Cao, W. & Khasawneh, M. T., Jan 1 2017, In : International Journal of Industrial and Systems Engineering. 25, 3, p. 279-296 18 p.

Research output: Contribution to journalArticle

Bending (forming)
Ergonomics
3 Citations (Scopus)
Parameter estimation
Nonlinear systems
Identification (control systems)
Planning
Computer simulation
3 Citations (Scopus)

A Novel Modification to the Incremental Forming Process, Part 1: Multi-directional Tooling

Grimm, T. J., Ragai, I. & Roth, J. T., Jan 1 2017, In : Procedia Manufacturing. 10, p. 510-519 10 p.

Research output: Contribution to journalArticle

Geometry
Formability
2 Citations (Scopus)

A Novel Modification to the Incremental Forming Process, Part 2: Validation of the Multi-directional Tooling Method

Grimm, T. J., Ragai, I. & Roth, J. T., Jan 1 2017, In : Procedia Manufacturing. 10, p. 520-530 11 p.

Research output: Contribution to journalArticle

Formability
30 Citations (Scopus)
Fuel economy
Machining
Electricity
Aerospace industry
Low carbon steel
12 Citations (Scopus)

Buckling in low pressure tube hydroforming

Nikhare, C., Weiss, M. & Hodgson, P. D., Aug 2017, In : Journal of Manufacturing Processes. 28, p. 1-10 10 p.

Research output: Contribution to journalArticle

Buckling
Tube
Yield stress
High strength steel
Sensitivity analysis
10 Citations (Scopus)

Characterization, synthetic generation, and statistical equivalence of composite microstructures

Sanei, S. H. R., Barsotti, E. J., Leonhardt, D. & Fertig, R. S., Jun 1 2017, In : Journal of Composite Materials. 51, 13, p. 1817-1829 13 p.

Research output: Contribution to journalArticle

Microstructure
Composite materials
Fibers
Image analysis
Volume fraction
1 Citation (Scopus)

Dynamic clustering of inventory parts to enhance warehouse management

Aqlan, F., Jan 1 2017, In : European Journal of Industrial Engineering. 11, 4, p. 469-485 17 p.

Research output: Contribution to journalArticle

Warehouses
Supply chains
Information systems
Data warehouses
Defects

Effects of gender on perception and interpretation of video game character behavior and emotion

Desai, N., Zhao, R. & Szafron, D., Dec 1 2017, In : IEEE Transactions on Computational Intelligence and AI in Games. 9, 4, p. 333-341 9 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Evaluation of Quenching Methods for the Purpose of Acoustic Data Collection

Roney, T. J., Muhhuku, S. N., Nikhare, C. P., Ragai, I. & Loker, D., Jan 1 2017, In : Procedia Manufacturing. 10, p. 1118-1128 11 p.

Research output: Contribution to journalArticle

Quenching
Acoustics
Microphones
Containers
Heat treatment
1 Citation (Scopus)

Fast dose optimization for rotating shield brachytherapy

Cho, M., Wu, X., Dadkhah, H., Yi, J., Flynn, R. T., Kim, Y. & Xu, W., Oct 2017, In : Medical Physics. 44, 10, p. 5384-5392 9 p.

Research output: Contribution to journalArticle

Brachytherapy
Sigmoid Colon
Rectum
Urinary Bladder
Organs at Risk

Fatigue Crack Growth and Fracture of 30 wt% B4C/6061Al Composites

Li, Y. L., Wang, W. X., Zhou, J., Chen, H. S., Zhao, J. C. & Wang, B. D., Sep 2017, In : Fatigue and Fracture of Engineering Materials and Structures. 40, 9, p. 1378-1388 11 p.

Research output: Contribution to journalArticle

Fatigue crack propagation
Extrusion
Composite materials
Cracks
Crack propagation
7 Citations (Scopus)
Domes
domes
Diamond
Pressurization
ABAQUS
24 Citations (Scopus)

Hot deformation behaviors and processing maps of B4C/Al6061 neutron absorber composites

Li, Y. L., Wang, W. X., Zhou, J. & Chen, H. S., Feb 1 2017, In : Materials Characterization. 124, p. 107-116 10 p.

Research output: Contribution to journalArticle

neutron absorbers
Hot working
Neutrons
composite materials
Composite materials
3 Citations (Scopus)

Interfacial characteristics and fracture behavior of spark-plasma-sintered TiNi fiber-reinforced 2024Al matrix composites

Dong, P., Wang, Z., Wang, W., Chen, S. & Zhou, J., Apr 13 2017, In : Materials Science and Engineering A. 691, p. 141-149 9 p.

Research output: Contribution to journalArticle

sparks
Electric sparks
shape memory alloys
Shape memory effect
Plasmas

Introducing advanced control methods to undergraduates using a state space model of a synchronous generator

Rasouli, M., Weissbach, R. & Yeung, D., Sep 1 2017, In : Journal of Engineering Technology. 34, 2, p. 16-29 14 p.

Research output: Contribution to journalArticle

Synchronous generators
Students
Controllers
Multivariable control systems
State space methods
15 Citations (Scopus)

Microstructure and mechanical properties of B4C/6061Al laminar composites fabricated by power metallurgy

Chen, H. S., Wang, W. X., Nie, H. H., Zhou, J., Li, Y. L. & Zhang, P., Sep 2017, In : Vacuum. 143, p. 363-370 8 p.

Research output: Contribution to journalArticle

metallurgy
Metallurgy
mechanical properties
Mechanical properties
microstructure
3 Citations (Scopus)

Molecular dynamics simulations and experimental investigations of atomic diffusion behavior at bonding interface in an explosively welded Al/Mg alloy composite plate

Zhang, T. T., Wang, W. X., Zhou, J., Cao, X. Q., Xie, R. S. & Wei, Y., Oct 2017, In : Acta Metallurgica Sinica (English Letters). 30, 10, p. 983-991 9 p.

Research output: Contribution to journalArticle

Molecular dynamics
Computer simulation
Composite materials
Atoms
Magnesium alloys
7 Citations (Scopus)

Optimizing multi-echelon inventory with three types of demand in supply chain

Dai, Z., Aqlan, F. & Gao, K., Nov 2017, In : Transportation Research Part E: Logistics and Transportation Review. 107, p. 141-177 37 p.

Research output: Contribution to journalArticle

Supply chains
supply
demand
stakeholder
Supply chain
8 Citations (Scopus)

Optimum Process Parameters for Springback Reduction of Single Point Incrementally Formed Polycarbonate

Edwards, W. L., Grimm, T. J., Ragai, I. & Roth, J. T., Jan 1 2017, In : Procedia Manufacturing. 10, p. 329-338 10 p.

Research output: Contribution to journalArticle

Polycarbonates
Residual stresses
Experiments
Geometry
Hot Temperature
7 Citations (Scopus)

Orientation and Displacement Detection for Smartphone Device Based IMUs

Suprem, A., Deep, V. & Elarabi, T., Jan 1 2017, In : IEEE Access. 5, p. 987-997 11 p., 7748482.

Research output: Contribution to journalArticle

Smartphones
Global positioning system
MEMS
Units of measurement
Sensors
1 Citation (Scopus)

P-Accountability: A Quantitative Study of Accountability in Networked Systems

Xiao, Z., Xiao, Y. & Wu, J., Aug 1 2017, In : Wireless Personal Communications. 95, 4, p. 3785-3812 28 p.

Research output: Contribution to journalArticle

Fault detection
1 Citation (Scopus)

Quality of service assurance-based auction for spectrum sharing systems

Sohul, M. M., Yao, M., Abdallah, A. S., Carrick, M., Marojevic, V. & Reed, J. H., May 1 2017, In : Analog Integrated Circuits and Signal Processing. 91, 2, p. 203-216 14 p.

Research output: Contribution to journalArticle

Hidden Markov models
Quality of service
Availability
Costs