School of Engineering Design, Technology, and Professional Programs

  • United States

Research Output 1978 2020

2020
3D printers
Education
Students

From the simulation center to the bedside: Validating the efficacy of a dynamic haptic robotic trainer in internal jugular central venous catheter placement

Chen, H. E., Sonntag, C. C., Mirkin, K. A., Pepley, D. F., Han, D. C., Moore, J. Z. & Miller, S. R., Feb 2020, In : American Journal of Surgery. 219, 2, p. 379-384 6 p.

Research output: Contribution to journalArticle

Central Venous Catheters
Robotics
Central Venous Catheterization
Neck
Manikins
2019

An analysis of design process and performance in distributed data science teams

Maier, T., DeFranco, J. & Mccomb, C., Oct 14 2019, In : Team Performance Management. 25, 7-8, p. 419-439 21 p.

Research output: Contribution to journalArticle

Software engineering
Semantics
Managers
Design process
Cohesion

An HF Software-Defined Radar to Study the Ionosphere

Bostan, S. M., Urbina, J., Mathews, J. D., Bilen, S. G. & Breakall, J. K., Sep 1 2019, In : Radio Science. 54, 9, p. 839-849 11 p.

Research output: Contribution to journalArticle

Ionosphere
ionospheres
radar
ionosphere
Radar

Application of a morphological non-sampling wavelet method to the online detection signal processing of coal mine wire rope

Jie, T., Hong-Yao, W., Bilen, S. G., Xinli, W. & Guo-Ying, M., Jan 1 2019, In : Insight: Non-Destructive Testing and Condition Monitoring. 61, 9, p. 521-527 7 p.

Research output: Contribution to journalArticle

Wire rope
Coal mines
Signal processing
Signal detection
Wavelet transforms
3 Citations (Scopus)
Dissection
Engineering education
Students
Engineers
Experiments

But will it print? Assessing student use of design for additive manufacturing and exploring its effect on design performance and manufacturability

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Manufacturing
Students
Design

Can Haptic Simulators Distinguish Expert Performance? A Case Study in Central Venous Catheterization in Surgical Education

Chen, H. E., Yovanoff, M. A., Pepley, D. F., Sonntag, C. C., Mirkin, K. A., Han, D. C., Moore, J. Z. & Miller, S. R., Feb 1 2019, In : Simulation in Healthcare. 14, 1, p. 35-42 8 p.

Research output: Contribution to journalArticle

Central Venous Catheterization
Haptics
Robotics
Simulator
Simulators

Complex solutions for complex problems? Exploring the effects of task complexity on student use of design for additive manufacturing and creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Manufacturing
Students
Self-efficacy
Education

Convolutional long short-term memory model for recognizing postures from wearable sensor

Zhao, J. & Obonyo, E. A., Jan 1 2019, In : CEUR Workshop Proceedings. 2394

Research output: Contribution to journalConference article

Neural networks
Wearable sensors
Long short-term memory
Testbeds
Learning systems
3D printers
Neural networks
Linear regression
Learning systems
Learning algorithms
Students
Screening
Engineering education
Innovation
Education

Do students want to dissect? A survey of student opinions on the use of product dissection in the classroom

Riegel, C., Starkey, E. M., Hunter, S. T. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissect
Dissection
Students
Module
Content Analysis

Effect of perforations on the bearing capacity of shallow foundation on clay

Liu, R., Liu, M. M., Tian, Y. H. & Wu, X., Jan 1 2019, In : Canadian Geotechnical Journal. 56, 5, p. 746-752 7 p.

Research output: Contribution to journalArticle

Bearing capacity
Clay
Shear strength
Pipelines
Soils

Evaluating idea quantity and variety when using digital collaboration tools to support brainstorming in non-collocated teams

Kaweesa, D. V., McComb, C., Menold, J., Ritter, S. & Meisel, N. A., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedback
Students
Engineering Design
Video conferencing
Collaborative Design

Evaluating surgical resident needle insertion skill gains in central venous catheterization training

Chen, H. E., Yovanoff, M. A., Pepley, D. F., Prabhu, R. S., Sonntag, C. C., Han, D., Moore, J. Z. & Miller, S. R., Jan 1 2019, In : Journal of Surgical Research. 233, p. 351-359 9 p.

Research output: Contribution to journalArticle

Central Venous Catheterization
Manikins
Needles
Robotics
Neck
1 Citation (Scopus)

Evaluating the Impact of Idea Dissemination Methods on Information Loss

Victoria Zhao, Z., Lopez, C. E. & Tucker, C. S., Sep 1 2019, In : Journal of Computing and Information Science in Engineering. 19, 3, 031006.

Research output: Contribution to journalArticle

Linguistics
Transmitters
Experiments
3D printers
Manufacturing
Concretes
Printing
Robotic arms
1 Citation (Scopus)
Dissection
Education
Students

Experimental studies on the drag reduction effect of bucket foundation installation under suction pressure in sand

Liu, R., Ma, W. G., Qi, Y. & Wu, X. L., Jul 4 2019, In : Ships and Offshore Structures. 14, 5, p. 421-431 11 p.

Research output: Contribution to journalArticle

Drag reduction
Sand
Friction
Offshore structures
Seepage
2 Citations (Scopus)

Exploring biases between human and machine generated designs

Lopez, C. E., Miller, S. R. & Tucker, C. S., Feb 1 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 2, 021104.

Research output: Contribution to journalArticle

Computer simulation
Deep learning

Geometric approach for analytical approximations of satellite coverage statistics

Hackett, T. M., Bilén, S. G., Bell, D. J. & Lo, M. W., Jan 1 2019, In : Journal of Spacecraft and Rockets. 56, 5, p. 1286-1299 14 p.

Research output: Contribution to journalArticle

Orbits
Statistics
statistics
Satellites
orbits

Image collection of 3D-printed prototypes and non-3D-printed prototypes

Li, M., Mahajan, N., Menold, J. & McComb, C., Dec 2019, In : Data in Brief. 27, 104691.

Research output: Contribution to journalArticle

Open Access
Image classification
Benchmarking
Image processing
Color

Instrument Development to Assess Design Project Appropriateness for Domain Relatedness, Ambiquity Tolerance, and Genderedness

Jackson, K. L., Blair, J. C. E., Kremer, G. E. & Wu, X., Mar 4 2019, Frontiers in Education: Fostering Innovation Through Diversity, FIE 2018 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 8658990. (Proceedings - Frontiers in Education Conference, FIE; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tolerance
engineering
Students
Electrical engineering
electrical engineering
1 Citation (Scopus)

Interpreting idea maps: Pairwise comparisons reveal what makes ideas novel

Ahmed, F., Ramachandran, S. K., Fuge, M., Hunter, S. & Miller, S., Feb 1 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 2, 021102.

Research output: Contribution to journalArticle

Computational methods
Milk
Decision making
Industry

Learning to design from humans: Imitating human designers through deep learning

Raina, A., McComb, C. & Cagan, J., Nov 1 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 11, e4044256.

Research output: Contribution to journalArticle

Deep learning
Image processing
Pixels

Leveraging animations to enhance learning through virtual product dissection

Kearney, K. G., Starkey, E. M. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissection
Animation
Students
Learning
Virtual reality
1 Citation (Scopus)

Liquid dynamics in response to an impinging low-temperature plasma jet

Brubaker, T. R., Ishikawa, K., Kondo, H., Tsutsumi, T., Hashizume, H., Tanaka, H., Knecht, S. D., Bilen, S. G. & Hori, M., Feb 13 2019, In : Journal of Physics D: Applied Physics. 52, 7, 075203.

Research output: Contribution to journalArticle

Plasma jets
cold plasmas
plasma jets
Liquids
liquids

Looks can be deceiving: Gaze pattern differences between novices and experts during placement of central lines

Chen, H. E., Sonntag, C. C., Pepley, D. F., Prabhu, R. S., Han, D., Moore, J. Z. & Miller, S. R., Feb 1 2019, In : American Journal of Surgery. 217, 2, p. 362-367 6 p.

Research output: Contribution to journalArticle

Robotics
Central Venous Catheterization
Manikins
Needles
Neck

Low-Cost Haptic Simulation Using Material Fracture

Pepley, D. F., Chen, H. E., Tang, Y., Adhikary, S. D., Miller, S. R. & Moore, J. Z., Oct 1 2019, In : IEEE Transactions on Haptics. 12, 4, p. 563-570 8 p., 8704968.

Research output: Contribution to journalArticle

Needles
Costs
Simulators
Materials testing
Polycarbonates

Measuring and optimizing design variety using herfindahl index

Ahmed, F., Ramachandran, S. K., Fuge, M., Hunter, S. & Miller, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metric
Polynomials
Modular Functions
Quality Measures
Design

Mining Twitter data for causal links between tweets and real-world outcomes

Lim, S. & Tucker, C. S., Sep 2019, In : Expert Systems with Applications: X. 3, 100007.

Research output: Contribution to journalArticle

Open Access
Data mining
Industry
Intelligent systems
Expert systems
Feedback

Novel algorithm for compression of magnetic flux leakage signal data obtained from wire ropes

Hong-yao, W., Jie, T., Xin, L., Xiao-wei, L., Guo-ying, M., Bilen, S. & Wu, X., Feb 2019, In : Insight: Non-Destructive Testing and Condition Monitoring. 61, 2, p. 76-82 7 p.

Research output: Contribution to journalArticle

Wire rope
Magnetic flux
Entropy
Compaction
Signal to noise ratio

Opportunities for natural language processing in qualitative engineering education research: Two examples

Berdanier, C. G. P., Baker, E., Wang, W. & McComb, C., Mar 4 2019, Frontiers in Education: Fostering Innovation Through Diversity, FIE 2018 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 8658747. (Proceedings - Frontiers in Education Conference, FIE; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering education
engineering
Processing
language
education
3D printers
Brushes
Product development
Printing
Cleaning

Real-Time Density Control of a Plasma Source Used for Simulating Low-Earth-Orbit Plasma Environment

McTernan, J. K., Leon, O. J., Bilen, S. G., Williams, J. D., Vaughn, J. A., Schneider, T. A. & Krause, L. H., Aug 1 2019, In : IEEE Transactions on Plasma Science. 47, 8, p. 3891-3897 7 p., 8734014.

Research output: Contribution to journalArticle

low Earth orbits
apertures
plasma density
standard deviation
ionospheres
1 Citation (Scopus)

Reinforcement Learning for Satellite Communications: From LEO to Deep Space Operations

Ferreira, P. V. R., Paffenroth, R., Wyglinski, A. M., Hackett, T. M., Bilen, S. G., Reinhart, R. C. & Mortensen, D. J., May 1 2019, In : IEEE Communications Magazine. 57, 5, p. 70-75 6 p., 8713802.

Research output: Contribution to journalArticle

Reinforcement learning
Communication satellites
Learning systems
NASA
Testbeds

Shock wave generated megahertz radiation of atmosphere

Mkrtchyan, A. H., Grigoryan, L. S., Khachatryan, H. F., Bilen, S. G., Parrot, M., Sargsyan, A. V. & Aramyan, A. R., Jan 2019, In : IEEE Transactions on Plasma Science. 47, 1, p. 118-120 3 p., 8475007.

Research output: Contribution to journalArticle

shock waves
atmospheres
radiation
free electrons
mathematical models

Should it stay or should it go? A case study of concept screening in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering Design
Screening
Industry
Generator
Research Methods

Software-Defined Radar Systems for Polar Ice-Sheet Research

Liu, P., Mendoza, J., Hu, H., Burkett, P. G., Urbina, J. V., Anandakrishnan, S. & Bilen, S. G., Mar 2019, In : IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing. 12, 3, p. 803-820 18 p., 8654719.

Research output: Contribution to journalArticle

Radar systems
Ice
ice sheet
radar
software
psychologist
graduate
discourse
student
educational psychology
4 Citations (Scopus)

The effects of player type on performance: A gamification case study

Lopez, C. E. & Tucker, C. S., Feb 2019, In : Computers in Human Behavior. 91, p. 333-345 13 p.

Research output: Contribution to journalArticle

Motivation
Guidelines
Players
Experiments

The effects of seat width, load factor, and passenger demographics on airline passenger accommodation

Miller, E. L., Lapp, S. M. & Parkinson, M. B., Feb 1 2019, In : Ergonomics. 62, 2, p. 330-341 12 p.

Research output: Contribution to journalArticle

Seats
accommodation
Demography
Anthropometry
Body Size

The multi agent paradigm and organizational abstractions in construction e-business

Obonyo, E. A. & Anumba, C., Jan 1 2019, EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering. Tizani, W. (ed.). Nottingham, (EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industry
Supply chain management
Construction industry
Software engineering
Communication

The trajectory of psychological safety in engineering teams: A longitudinal exploration in engineering design education

Miller, S., Jablokow, K., Marhefka, J., Mohammed, S., Heininger, K. & Ritter, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering Design
Safety
Education
Trajectories
Trajectory

Transferring design strategies from human to computer and across design problems

Raina, A., Cagan, J. & McComb, C., Nov 1 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 11, e4044258.

Research output: Contribution to journalArticle

Simulated annealing
Planning
Statistical Models
1 Citation (Scopus)
Students
Decision making
Feedback
Communication
1 Citation (Scopus)

When groups experience conflict: intersection among undergraduates’ individual and group motivational goals, project commitment, and emotions

Park, J., Park, S., Choe, N. H. & Schallert, D. L., Oct 21 2019, In : Educational Psychology. 39, 9, p. 1156-1173 18 p.

Research output: Contribution to journalArticle

Emotions
emotion
commitment
Students
project group
2018
1 Citation (Scopus)

Achieving Functionally Graded Material Composition Through Bicontinuous Mesostructural Geometry in Material Extrusion Additive Manufacturing

Stoner, B., Bartolai, J., Kaweesa, D. V., Meisel, N. A. & Simpson, T. W., Mar 1 2018, In : JOM. 70, 3, p. 413-418 6 p.

Research output: Contribution to journalArticle

3D printers
Functionally graded materials
Extrusion
Geometry
Chemical analysis