• 1842 Citations
  • 20 h-Index
20092020
If you made any changes in Pure, your changes will be visible here soon.

Research Output 2009 2020

2020

Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials

Bobbio, L. D., Bocklund, B., Reichardt, A., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., McEnerney, B. W., Hosemann, P., Liu, Z. & Beese, A. M., Jan 25 2020, In : Journal of Alloys and Compounds. 814, 151729.

Research output: Contribution to journalArticle

Functionally graded materials
Stainless Steel
Stainless steel
3D printers
Phase composition
2019
2 Citations (Scopus)

Characterization of the Effects of Internal Pores on Tensile Properties of Additively Manufactured Austenitic Stainless Steel 316L

Wilson-Heid, A. E., Novak, T. C. & Beese, A. M., Jul 15 2019, In : Experimental Mechanics. 59, 6, p. 793-804 12 p.

Research output: Contribution to journalArticle

3D printers
Austenitic stainless steel
Tensile properties
Mechanical properties
Fusion reactions
10 Citations (Scopus)
Repair
Porosity
Mechanical properties
Microstructure
Substrates
Powders
beds
Fusion reactions
fusion
Calibration

Full Field Strain Measurement of Material Extrusion Additive Manufacturing Parts with Solid and Sparse Infill Geometries

Bartolai, J., Wilson-Heid, A. E., Kruse, J. R., Beese, A. M. & Simpson, T. W., Mar 15 2019, In : JOM. 71, 3, p. 871-879 9 p.

Research output: Contribution to journalArticle

3D printers
Strain measurement
Extrusion
Tensile strain
Geometry

Preface

Carroll, J., Xia, S., Beese, A. M., Berke, R. B. & Pataky, G. J., Jan 1 2019, In : Conference Proceedings of the Society for Experimental Mechanics Series. Part F4, p. v

Research output: Contribution to journalEditorial

Preface

Carroll, J., Xia, S., Beese, A. M., Berke, R. B. & Pataky, G. J., Jan 1 2019, In : Conference Proceedings of the Society for Experimental Mechanics Series. p. v

Research output: Contribution to journalEditorial

Preface

Kramer, S., Jordan, J. L., Jin, H., Carroll, J. & Beese, A. M., Jan 1 2019, In : Conference Proceedings of the Society for Experimental Mechanics Series. p. v-viii

Research output: Contribution to journalEditorial

1 Citation (Scopus)
Stainless Steel
Microstructural evolution
phase transformations
stainless steels
Mechanics
2 Citations (Scopus)
Stainless Steel
plastic properties
Plasticity
stainless steels
Mechanics
2018
10 Citations (Scopus)

Absence of dynamic strain aging in an additively manufactured nickel-base superalloy

Beese, A. M., Wang, Z., Stoica, A. D. & Ma, D., Dec 1 2018, In : Nature communications. 9, 1, 2083.

Research output: Contribution to journalArticle

precipitation hardening
3D printers
heat resistant alloys
Nickel
Superalloys
419 Citations (Scopus)

Additive manufacturing of metallic components – Process, structure and properties

Debroy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A. & Zhang, W., Mar 1 2018, In : Progress in Materials Science. 92, p. 112-224 113 p.

Research output: Contribution to journalReview article

3D printers
Refractory alloys
Precious metals
Welding
Experiments
2 Citations (Scopus)

Anisotropic multiaxial plasticity model for laser powder bed fusion additively manufactured Ti-6Al-4V

Wilson-Heid, A. E., Qin, S. & Beese, A. M., Dec 19 2018, In : Materials Science and Engineering A. 738, p. 90-97 8 p.

Research output: Contribution to journalArticle

plastic properties
Powders
Plasticity
beds
Fusion reactions
7 Citations (Scopus)

Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V section

Bobbio, L. D., Bocklund, B., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., McEnerney, B., Liu, Z. & Beese, A. M., Apr 25 2018, In : Journal of Alloys and Compounds. 742, p. 1031-1036 6 p.

Research output: Contribution to journalArticle

Functionally graded materials
Stainless Steel
3D printers
Stainless steel
Joining
4 Citations (Scopus)
Preheating
Lasers
Substrates
Laser cladding
Stress relaxation
2 Citations (Scopus)

Experimental analysis and thermodynamic calculations of an additively manufactured functionally graded material of v to Invar 36

Bobbio, L. D., Bocklund, B., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., McEnerney, B., Liu, Z. & Beese, A. M., Jun 13 2018, In : Journal of Materials Research. 33, 11, p. 1642-1649 8 p.

Research output: Contribution to journalArticle

Functionally graded materials
3D printers
manufacturing
Thermodynamics
thermodynamics
5 Citations (Scopus)

In situ electron microscopy tensile testing of constrained carbon nanofibers

Ramachandramoorthy, R., Beese, A. M. & Espinosa, H., Dec 1 2018, In : International Journal of Mechanical Sciences. 149, p. 452-458 7 p.

Research output: Contribution to journalArticle

Carbon nanofibers
Tensile testing
Electron microscopy
electron microscopy
carbon
1 Citation (Scopus)

Micromechanics of multiaxial plasticity of DP600: Experiments and microstructural deformation modeling

Qin, S., McLendon, R., Oancea, V. & Beese, A. M., Apr 4 2018, In : Materials Science and Engineering A. 721, p. 168-178 11 p.

Research output: Contribution to journalArticle

micromechanics
Micromechanics
plastic properties
Plasticity
Steel
1 Citation (Scopus)

Microstructure and Mechanical Properties of AM Builds

Beese, A. M., Jan 1 2018, Thermo-Mechanical Modeling of Additive Manufacturing. Elsevier Inc., p. 81-92 12 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Mechanical properties
Microstructure
Melting
Rapid solidification
Austenitic stainless steel

Preface

Carroll, J., Xia, S., Beese, A. M., Berke, R. B. & Pataky, G. J., Jan 1 2018, In : Conference Proceedings of the Society for Experimental Mechanics Series. 7, p. v

Research output: Contribution to journalEditorial

7 Citations (Scopus)
3D printers
stress relaxation
heat resistant alloys
Stress relaxation
Neutron diffraction
2017
56 Citations (Scopus)

Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations

Bobbio, L. D., Otis, R. A., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., Liu, Z. & Beese, A. M., Apr 1 2017, In : Acta Materialia. 127, p. 133-142 10 p.

Research output: Contribution to journalArticle

3D printers
Functionally graded materials
Thermodynamics
Fabrication
Chemical analysis
15 Citations (Scopus)

Characterization of the strength of support structures used in powder bed fusion additive manufacturing of Ti-6Al-4V

Bobbio, L. D., Qin, S., Dunbar, A., Michaleris, P. & Beese, A. M., Mar 1 2017, In : Additive Manufacturing. 14, p. 60-68 9 p.

Research output: Contribution to journalArticle

3D printers
Powders
Fusion reactions
Ligaments
Stress concentration
17 Citations (Scopus)

Crystallographic texture in an additively manufactured nickel-base superalloy

Ma, D., Stoica, A. D., Wang, Z. & Beese, A. M., Jan 27 2017, In : Materials Science and Engineering A. 684, p. 47-53 7 p.

Research output: Contribution to journalArticle

heat resistant alloys
Nickel
Superalloys
textures
Textures
19 Citations (Scopus)
Stainless Steel
Stainless steel
Phase transitions
3D printers
Kinetics
8 Citations (Scopus)
Inconel (trademark)
Fusion reactions
hardness
fusion
Hardness
6 Citations (Scopus)

Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: External morphology

Corbin, D. J., Nassar, A. R., Reutzel, E. W., Beese, A. M. & Kistler, N. A., May 1 2017, In : Journal of Laser Applications. 29, 2, 022001.

Research output: Contribution to journalArticle

Inconel (trademark)
beads
Profilometry
Lasers
Processing

Finite element analysis on stellite 17mm tube valve for pediatric ventricular assist device

Scheib, C. M., Newswanger, R. K., Beese, A. M., Bowen, T., Lewis, G., Roush, E. P., Jhun, C-S., Weiss, W. & Rosenberg, G., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stellite
Pediatrics
Finite element method
8 Citations (Scopus)
dwell
nickel alloys
Nickel alloys
titanium alloys
Titanium alloys
101 Citations (Scopus)

Materials for additive manufacturing

Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M. & Clare, A., Jan 1 2017, In : CIRP Annals - Manufacturing Technology. 66, 2, p. 659-681 23 p.

Research output: Contribution to journalArticle

3D printers
Cermets
Feedstocks
Electric properties
Optical properties

Preface

Zehnder, A. T., Carroll, J., Hazeli, K., Berke, R. B., Pataky, G., Cavalli, M., Beese, A. M. & Xia, S., Jan 1 2017, In : Conference Proceedings of the Society for Experimental Mechanics Series. 8, p. V

Research output: Contribution to journalEditorial

13 Citations (Scopus)

Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V

Wilson-Heid, A. E., Wang, Z., McCornac, B. & Beese, A. M., Oct 26 2017, In : Materials Science and Engineering A. 706, p. 287-294 8 p.

Research output: Contribution to journalArticle

Powders
Fusion reactions
beds
Continuous wave lasers
fusion
63 Citations (Scopus)

Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions

Wang, Z., Denlinger, E., Michaleris, P., Stoica, A. D., Ma, D. & Beese, A. M., Jan 5 2017, In : Materials and Design. 113, p. 169-177 9 p.

Research output: Contribution to journalArticle

3D printers
Neutron diffraction
Residual stresses
Heat treatment
Stress relief
10 Citations (Scopus)

Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing

Wang, Z., Stoica, A. D., Ma, D. & Beese, A. M., Nov 7 2017, In : Materials Science and Engineering A. 707, p. 585-592 8 p.

Research output: Contribution to journalArticle

3D printers
stress relaxation
Stress relaxation
Neutron diffraction
neutron diffraction
20 Citations (Scopus)

The desmoplakin-intermediate filament linkage regulates cell mechanics

Broussard, J. A., Yang, R., Huang, C., Nathamgari, S. S. P., Beese, A. M., Godsel, L. M., Hegazy, M. H., Lee, S., Zhou, F., Sniadecki, N. J., Green, K. J. & Espinosa, H. D., Nov 7 2017, In : Molecular biology of the cell. 28, 23, p. 3156-3164 9 p.

Research output: Contribution to journalArticle

Desmoplakins
Intermediate Filaments
Mechanics
Desmosomes
Actin Cytoskeleton
2016
20 Citations (Scopus)

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction

Wang, Z., Stoica, A. D., Ma, D. & Beese, A. M., Sep 30 2016, In : Materials Science and Engineering A. 674, p. 406-412 7 p.

Research output: Contribution to journalArticle

Inconel (trademark)
Elastic constants
Neutron diffraction
neutron diffraction
elastic properties
129 Citations (Scopus)
3D printers
Austenitic stainless steel
Tensile properties
Microstructure
Processing
84 Citations (Scopus)

Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling

Carroll, B. E., Otis, R. A., Borgonia, J. P., Suh, J. O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z. & Beese, A. M., Apr 15 2016, In : Acta Materialia. 108, p. 46-54 9 p.

Research output: Contribution to journalArticle

Functionally graded materials
Stainless Steel
3D printers
Stainless steel
Thermodynamics

Preface

Beese, A. M., Zehnder, A. T. & Xia, S., Jan 1 2016, In : Conference Proceedings of the Society for Experimental Mechanics Series. 8, 2016, p. v

Research output: Contribution to journalEditorial

71 Citations (Scopus)

Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock

Beese, A. M. & Carroll, B. E., Mar 1 2016, In : JOM. 68, 3, p. 724-734 11 p.

Research output: Contribution to journalArticle

3D printers
Powders
Feedstocks
Mechanical properties
Lasers
2015
268 Citations (Scopus)

Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing

Carroll, B. E., Palmer, T. & Beese, A. M., Apr 1 2015, In : Acta Materialia. 87, p. 309-320 12 p.

Research output: Contribution to journalArticle

3D printers
Ductility
Mechanical properties
Oxygen
Yield stress
3D printers
Process control
Feedback
Fabrication
2014
21 Citations (Scopus)

Defect-tolerant nanocomposites through bio-inspired stiffness modulation

Beese, A. M., An, Z., Sarkar, S., Nathamgari, S. S. P., Espinosa, H. D. & Nguyen, S. T., May 21 2014, In : Advanced Functional Materials. 24, 19, p. 2883-2891 9 p.

Research output: Contribution to journalArticle

Graphite
Graphene
stiffness
Nanocomposites
nanocomposites
22 Citations (Scopus)

In situ scanning electron microscope peeling to quantify surface energy between multiwalled carbon nanotubes and graphene

Roenbeck, M. R., Wei, X., Beese, A. M., Naraghi, M., Furmanchuk, AO., Paci, J. T., Schatz, G. C. & Espinosa, H. D., Jan 28 2014, In : ACS Nano. 8, 1, p. 124-138 15 p.

Research output: Contribution to journalArticle

peeling
Peeling
Graphite
Multiwalled carbon nanotubes (MWCN)
Interfacial energy
43 Citations (Scopus)

Key factors limiting carbon nanotube yarn strength: Exploring processing-structure-property relationships

Beese, A. M., Wei, X., Sarkar, S., Ramachandramoorthy, R., Roenbeck, M. R., Moravsky, A., Ford, M., Yavari, F., Keane, D. T., Loutfy, R. O., Nguyen, S. B. T. & Espinosa, H. D., Nov 25 2014, In : ACS Nano. 8, 11, p. 11454-11466 13 p.

Research output: Contribution to journalArticle

yarns
Carbon Nanotubes
Yarn
Carbon nanotubes
carbon nanotubes
2013
47 Citations (Scopus)

Bio-inspired carbon nanotube-polymer composite yarns with hydrogen bond-mediated lateral interactions

Beese, A. M., Sarkar, S., Nair, A., Naraghi, M., An, Z., Moravsky, A., Loutfy, R. O., Buehler, M. J., Nguyen, S. T. & Espinosa, H. D., Apr 23 2013, In : ACS Nano. 7, 4, p. 3434-3446 13 p.

Research output: Contribution to journalArticle

yarns
Carbon Nanotubes
Yarn
Carbon nanotubes
Hydrogen bonds
52 Citations (Scopus)

Extraordinary improvement of the graphitic structure of continuous carbon nanofibers templated with double wall carbon nanotubes

Papkov, D., Beese, A. M., Goponenko, A., Zou, Y., Naraghi, M., Espinosa, H. D., Saha, B., Schatz, G. C., Moravsky, A., Loutfy, R., Nguyen, S. T. & Dzenis, Y., Jan 22 2013, In : ACS Nano. 7, 1, p. 126-142 17 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Carbon nanofibers
carbonization
Carbonization
Nanotubes
28 Citations (Scopus)

In situ transmission electron microscope tensile testing reveals structure-property relationships in carbon nanofibers

Beese, A. M., Papkov, D., Li, S., Dzenis, Y. & Espinosa, H. D., Aug 1 2013, In : Carbon. 60, p. 246-253 8 p.

Research output: Contribution to journalArticle

Carbon nanofibers
Tensile testing
Electron microscopes
Fibers
Nanofibers
3 Citations (Scopus)

Tailoring the Mechanical Properties of Carbon Nanotube Fibers

Filleter, T., Beese, A. M., Roenbeck, M. R., Wei, X. & Espinosa, H. D., Sep 1 2013, Nanotube Superfiber Materials: Changing Engineering Design. Elsevier Inc., p. 61-85 25 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Carbon Nanotubes
Carbon nanotubes
Mechanical properties
Fibers
Industrial applications
2012
22 Citations (Scopus)
plastic properties
Plasticity
Kinetics
kinetics
Martensite