• 1493 Citations
  • 21 h-Index
1992 …2019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1992 2019

1992
16 Citations (Scopus)

Comparison of micromechanical models for elastic properties

Lissenden, III, C. J. & Herakovich, C. T., 1992, Proc 3 Int Conf Eng Constr Oper Space Space 92. Publ by ASCE, p. 1309-1322 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite materials
Graphite
Glass
9 Citations (Scopus)

Response of SiC/Ti tubes under biaxial loading in the presence of damage

Lissenden, C. J., Pindera, M. J. & Herakovich, C. T., Dec 1 1992, Damage Mechanics in Composites. Publ by ASME, p. 73-90 18 p. (American Society of Mechanical Engineers, Applied Mechanics Division, AMD; vol. 150).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasticity
Fibers
Loads (forces)
Micromechanics
Silicon carbide
1994
1 Citation (Scopus)

Damage induced room temperature creep of titanium matrix composites

Lissenden, III, C. J., Herakovich, C. T. & Pindera, M. J., Dec 1 1994, p. 39-49. 11 p.

Research output: Contribution to conferencePaper

Creep
Titanium
Composite materials
Debonding
Temperature
2 Citations (Scopus)

Modelling Interfacial Debonding in Titanium Matrix Composites

Lissenden, III, C. J. & Herakovich, C. T., Jan 1 1994, Studies in Applied Mechanics. C ed. p. 239-259 21 p. (Studies in Applied Mechanics; vol. 41, no. C).

Research output: Chapter in Book/Report/Conference proceedingChapter

Debonding
Titanium
Composite materials
Viscoplasticity
Laminated composites
15 Citations (Scopus)

Stiffness degradation of SiC/Ti tubes subjected to biaxial loading

Lissenden, III, C. J., Pindera, M. J. & Herakovich, C. T., Jan 1 1994, In : Composites Science and Technology. 50, 1, p. 23-36 14 p.

Research output: Contribution to journalArticle

Stiffness
Degradation
Elastic moduli
Loads (forces)
Micromechanics
1995
49 Citations (Scopus)

Numerical modelling of damage development and viscoplasticity in metal matrix composites

Lissenden, III, C. J. & Herakovich, C. T., Jan 1 1995, In : Computer Methods in Applied Mechanics and Engineering. 126, 3-4, p. 289-303 15 p.

Research output: Contribution to journalArticle

viscoplasticity
Viscoplasticity
metal matrix composites
fiber-matrix interfaces
damage
21 Citations (Scopus)

Response of SiC/Ti under Combined Loading. Part I: Theory and Experiment for Imperfect Bondin

Lissenden, III, C. J., Herakovich, C. T. & Pindera, M. J., Jan 1 1995, In : Journal of Composite Materials. 29, 2, p. 130-155 26 p.

Research output: Contribution to journalArticle

Titanium
Silicon carbide
Fibers
Composite materials
Shear stress
10 Citations (Scopus)

Response of SiC/Ti under Combined Loading Part II: Room Temperature Creep Effects

Lissenden, III, C. J., Herakovich, C. T. & Pindera, M. J., Jan 1 1995, In : Journal of Composite Materials. 29, 10, p. 1403-1417 15 p.

Research output: Contribution to journalArticle

Titanium
Silicon carbide
Creep
Shear stress
Unloading
1996
4 Citations (Scopus)
Debonding
Fibers
Composite materials
Metals
Ductility

Critique of macro flow/damage surface representations for metal matrix composites using micromechanics

Lissenden, III, C. J. & Arnold, S. M., 1996, Advanced Materials: Development, Characterization Processing, and Mechanical Behavior. Nicholas, T. (ed.). ASME, Vol. 74. p. 263 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite micromechanics
Macros
Metals
Debonding
Micromechanics
Composite micromechanics
micromechanics
metal matrix composites
Macros
damage
12 Citations (Scopus)

Experimental determination of yield and flow surfaces under axial-torsional loading

Lissenden, III, C. J., Lerch, B. A., Ellis, J. R. & Robinson, D. N., Jan 1 1996, In : ASTM Special Technical Publication. 1280, p. 92-112 21 p.

Research output: Contribution to journalArticle

Dilatometers
Plasticity
Strain rate
Strain gages
Stainless steel
10 Citations (Scopus)

Interfacial debonding in laminated titanium matrix composites

Lissenden, III, C. J. & Herakovich, C. T., Jan 1 1996, In : Mechanics of Materials. 22, 4, p. 279-290 12 p.

Research output: Contribution to journalArticle

Debonding
Titanium
titanium
composite materials
Composite materials
8 Citations (Scopus)

Response of SiC/Ti under combined loading Part III: Microstructural evaluation

Lissenden, III, C. J., Lerch, B. A. & Herakovich, C. T., Jan 1 1996, In : Journal of Composite Materials. 30, 1, p. 84-108 25 p.

Research output: Contribution to journalArticle

Titanium
Silicon carbide
Debonding
Cracks
Fibers
1997
31 Citations (Scopus)

Damage detection by piezoelectric patches in a free vibration method

Jian, X. H., Tzou, H. S., Lissenden, III, C. J. & Penn, L. S., Jan 1 1997, In : Journal of Composite Materials. 31, 4, p. 345-359 15 p.

Research output: Contribution to journalArticle

Damage detection
Delamination
Glass fibers
Frequency response
Natural frequencies
21 Citations (Scopus)
Metals
Composite materials
Debonding
Macros
Micromechanics
1998
5 Citations (Scopus)

Effect of microstructural architecture on flow/damage surfaces for metal matrix composites

Lissenden, III, C. J. & Arnold, S. M., Dec 1 1998, In : Studies in Applied Mechanics. 46, C, p. 385-400 16 p.

Research output: Contribution to journalArticle

Composite materials
Metals
Viscoplasticity
Micromechanics
Fibers
1999
6 Citations (Scopus)

A Methodology for Determining Rate-Dependent Flow Surfaces for Inconel 718

Lissenden, III, C. J., Gil, C. M. & Lerch, B. A., Nov 1 1999, In : Journal of Testing and Evaluation. 27, 6, p. 402-411 10 p.

Research output: Contribution to journalArticle

Experiments
Aviation
Shear stress
Strain rate
Precipitates
25 Citations (Scopus)

Fiber-matrix interfacial constitutive relations for metal matrix composites

Lissenden, III, C. J., Jan 1 1999, In : Composites Part B: Engineering. 30, 3, p. 267-278 12 p.

Research output: Contribution to journalArticle

Metals
Fibers
Debonding
Composite materials
Ductility
Anisotropy
Experiments
Martensitic steel
Hydrostatic pressure
Torsional stress
10 Citations (Scopus)

Unusual nonlinear response of some metallic materials

Gil, C. M., Lissenden, III, C. J. & Lerch, B. A., Jan 1 1999, In : Mechanics of Materials. 31, 9, p. 565-577 13 p.

Research output: Contribution to journalArticle

stiffening
Inconel (trademark)
Titanium
Nickel
Silicon carbide
17 Citations (Scopus)

Yield of Inconel 718 by Axial-Torsional Loading at Temperatures up to 649°C

Gil, C. M., Lissenden, III, C. J. & Lerch, B. A., Sep 1999, In : Journal of Testing and Evaluation. 27, 5, p. 327-336 10 p.

Research output: Contribution to journalArticle

Superalloys
Temperature
Nickel
Hardening
Kinematics
2000
2 Citations (Scopus)

Axial-torsional load effects of Haynes 188 at 650°C

Lissenden, III, C. J., Walker, M. A. & Lerch, B. A., Jan 1 2000, In : ASTM Special Technical Publication. 1387, p. 99-125 27 p.

Research output: Contribution to journalArticle

Viscoplasticity
Strain rate
Shear stress
Cobalt
16 Citations (Scopus)

Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures

Lissenden, III, C. J., Arnold, S. M. & Iyer, S. K., Aug 7 2000, In : International journal of plasticity. 16, 9, p. 1049-1074 26 p.

Research output: Contribution to journalArticle

Fiber reinforced metals
Microstructure
Micromechanics
Fibers
Debonding
13 Citations (Scopus)
Inconel (trademark)
Anisotropy
anisotropy
Experiments
Martensitic steel
15 Citations (Scopus)

Local and overall flow in composites predicted by micromechanics

Iyer, S. K., Lissenden, III, C. J. & Arnold, S. M., Jan 1 2000, In : Composites Part B: Engineering. 31, 4, p. 327-343 17 p.

Research output: Contribution to journalArticle

Micromechanics
Composite materials
Residual stresses
Strain rate
Metals
Shear strain
Stress relaxation
Plastics
Viscoplasticity
Plasticity
2001
Technical presentations
Mechanics
Students
Systems engineering
1 Citation (Scopus)
Nodular iron
Forging
Geometry
Quenching
Plastic deformation
1 Citation (Scopus)

Plastic coupling and stress relaxation during nonproportional axial-shear strain-controlled loading

Lissenden, III, C. J., Arnold, S. M. & Saleeb, A. F., Jan 1 2001, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 123, 1, p. 81-87 7 p.

Research output: Contribution to journalArticle

Shear strain
Stress relaxation
Plastics
Viscoplasticity
Plasticity
2002
55 Citations (Scopus)

3D finite element analysis of particle-reinforced aluminum

Shen, H. & Lissenden, III, C. J., Dec 15 2002, In : Materials Science and Engineering A. 338, 1-2, p. 271-281 11 p.

Research output: Contribution to journalArticle

Aluminum
aluminum
Finite element method
strain distribution
stress distribution

A goals-oriented mechanics curriculum featuring applications

Salamon, N. J. & Lissenden, III, C. J., Dec 1 2002, In : Proceedings - Frontiers in Education Conference. 2

Research output: Contribution to journalConference article

mechanic
Curricula
Mechanics
curriculum
learning objective
12 Citations (Scopus)

Applications of finite element analysis for undergraduates

Lissenden, III, C. J., Wagle, G. S. & Salamon, N. J., Dec 1 2002, In : ASEE Annual Conference Proceedings. p. 7701-7707 7 p.

Research output: Contribution to journalConference article

Students
Finite element method
Software packages
Mechanics
Teaching
2 Citations (Scopus)

Design project for advanced mechanics of materials

Lissenden, III, C. J., Wagle, G. S. & Salamon, N. J., Dec 1 2002, In : ASEE Annual Conference Proceedings. p. 7683-7691 9 p.

Research output: Contribution to journalConference article

Mechanics
Students
Bicycles
Torsional stress
Design of experiments
2003
41 Citations (Scopus)

Multiaxial constitutive model accounting for the strength-differential in Inconel 718

Iyer, S. K. & Lissenden, III, C. J., Jan 1 2003, In : International journal of plasticity. 19, 12 SPEC ISS., p. 2055-2081 27 p.

Research output: Contribution to journalArticle

Constitutive models
Plastic flow
Plasticity
Shear strain
Nickel
3 Citations (Scopus)

Tensile, compressee, and shear response of a particulate reinforced aluminum composite

Lei, X. & Lissenden, III, C. J., Jan 1 2003, In : ASTM Special Technical Publication. 1436, p. 255-272 18 p.

Research output: Contribution to journalConference article

Shear stress
Aluminum
Composite materials
Poisson ratio
Compressive stress
2004
8 Citations (Scopus)

A more comprehensive method for yield locus construction for metallic alloys and composites

Lissenden, III, C. J. & Lei, X., Jan 1 2004, In : Experimental Mechanics. 44, 1, p. 10-20 11 p.

Research output: Contribution to journalArticle

Composite materials
Aluminum
Hardening
Titanium alloys
Silicon carbide
5 Citations (Scopus)

Design Project for Advanced Mechanics of Materials

Lissenden, III, C. J. & Salamon, N. J., Feb 17 2004, In : International Journal of Engineering Education. 20, 1, p. 103-112 10 p.

Research output: Contribution to journalArticle

mechanic
Mechanics
Students
student
graduate
3 Citations (Scopus)

Fatigue of beta titanium alloy at 20, 482 and 648 °C

Solimine, P. A. & Lissenden, III, C. J., Oct 1 2004, In : Fatigue and Fracture of Engineering Materials and Structures. 27, 10, p. 943-955 13 p.

Research output: Contribution to journalArticle

Titanium alloys
Fatigue of materials
Fibers
Composite materials
beta titanium
8 Citations (Scopus)

Hardening behavior of three metallic alloys under combined stresses at elevated temperature

Lissenden, III, C. J., Colaiuta, J. F. & Lerch, B. A., May 1 2004, In : Acta Mechanica. 169, 1-4, p. 53-77 25 p.

Research output: Contribution to journalArticle

Hardening
Temperature
Dilatometers
Shear strain
Strengthening (metal)
22 Citations (Scopus)

Using torsional vibration analysis as a synergistic method for crack detection in rotating equipment

Lebold, M. S., Maynard, K., Reichard, K., Trethewey, M., Bieryla, D., Lissenden, C. & Dobbins, D., Dec 1 2004, 2004 IEEE Aerospace Conference Proceedings. p. 3517-3526 10 p. (IEEE Aerospace Conference Proceedings; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack detection
Vibration analysis
Pumps
Crack propagation
Coolants
2005
11 Citations (Scopus)

A non-intrusive technique for on-line shaft crack detection and tracking

Lebold, M. S., Maynard, K., Reichard, K. M., Trethewey, M. W., Hasker, J., Lissenden, III, C. J. & Dobbins, D., Dec 1 2005, Proceedings - 2005 IEEE Aerospace Conference. 1559672. (IEEE Aerospace Conference Proceedings; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack detection
Crack propagation
Cracks
Coolants
Rotors
1 Citation (Scopus)

Shaft crack monitoring via torsional vibration analysis; Part 1 - Laboratory tests

Bieryla, D. J., Trethewey, M. W., Lissenden, III, C. J., Lebold, M. S. & Maynard, K. P., Dec 1 2005, IMAC-XXIII: Conference and Exposition on Structural Dynamics - Structural Health Monitoring. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
Cracks
Monitoring
Vibrations (mechanical)
Natural frequencies
13 Citations (Scopus)
metal matrix composites
Metals
Composite materials
Microstructure
Ductility
2006

Long range focused ultrasonic guided waves for corrosion detection in tubular structures

Rose, J. L., Mu, J., Zhang, L. & Lissenden, C. J., Dec 1 2006, In : NACE - International Corrosion Conference Series. p. 62631-626313 563683 p.

Research output: Contribution to journalConference article

Guided electromagnetic wave propagation
Ultrasonic waves
Insulation
Inspection
Pipe
2007
20 Citations (Scopus)

Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature

Lissenden, III, C. J., Doraiswamy, D. & Arnold, S. M., Jan 1 2007, In : International journal of plasticity. 23, 1, p. 1-24 24 p.

Research output: Contribution to journalArticle

Titanium alloys
Temperature
Stress relaxation
Strain rate
Creep
2 Citations (Scopus)

Internal damage detection in a laminated composite plate using ultrasonic guided waves

Lissenden, III, C. J., Yan, F., Hauck, E. T., Noga, D. M. & Rose, J. L., May 14 2007, Review of Progress in Quantitative Nondestructive Evaluation: Volume 26. p. 1029-1035 7 p. (AIP Conference Proceedings; vol. 894).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ultrasonics
damage
composite materials
wave propagation
indication
3 Citations (Scopus)

Maxwell stress distributions in chiral sculptured thin films due to obliquely incident plane waves

Ross, B. M., Lakhtakia, A. & Lissenden, III, C. J., Jul 1 2007, In : Optics Communications. 275, 1, p. 1-9 9 p.

Research output: Contribution to journalArticle

stress distribution
Stress concentration
plane waves
Thin films
thin films
16 Citations (Scopus)
Aluminum
plastic properties
Plasticity
aluminum
composite materials