• 1493 Citations
  • 21 h-Index
1992 …2019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1992 2019

55 Citations (Scopus)

3D finite element analysis of particle-reinforced aluminum

Shen, H. & Lissenden, III, C. J., Dec 15 2002, In : Materials Science and Engineering A. 338, 1-2, p. 271-281 11 p.

Research output: Contribution to journalArticle

Aluminum
aluminum
Finite element method
strain distribution
stress distribution
3 Citations (Scopus)

Adhesive defect detection in composite adhesive joints using phased array transducers

Ren, B. & Lissenden, III, C. J., Jan 1 2015, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 34. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., p. 640-648 9 p. (AIP Conference Proceedings; vol. 1650).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

phased arrays
adhesives
transducers
aircraft structures
composite materials
1 Citation (Scopus)

A fully coupled model for actuation of higher order modes of Lamb waves

Ren, B. & Lissenden, III, C. J., Feb 16 2017, 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 36. Bond, L. J. & Chimenti, D. E. (eds.). American Institute of Physics Inc., 030009. (AIP Conference Proceedings; vol. 1806).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lamb waves
piezoelectric transducers
actuation
structural health monitoring
waveguides

A goals-oriented mechanics curriculum featuring applications

Salamon, N. J. & Lissenden, III, C. J., Dec 1 2002, In : Proceedings - Frontiers in Education Conference. 2

Research output: Contribution to journalConference article

mechanic
Curricula
Mechanics
curriculum
learning objective
7 Citations (Scopus)
Guided electromagnetic wave propagation
shear
sensors
Sensors
Health
6 Citations (Scopus)

A Methodology for Determining Rate-Dependent Flow Surfaces for Inconel 718

Lissenden, III, C. J., Gil, C. M. & Lerch, B. A., Nov 1 1999, In : Journal of Testing and Evaluation. 27, 6, p. 402-411 10 p.

Research output: Contribution to journalArticle

Experiments
Aviation
Shear stress
Strain rate
Precipitates
8 Citations (Scopus)

A more comprehensive method for yield locus construction for metallic alloys and composites

Lissenden, III, C. J. & Lei, X., Jan 1 2004, In : Experimental Mechanics. 44, 1, p. 10-20 11 p.

Research output: Contribution to journalArticle

Composite materials
Aluminum
Hardening
Titanium alloys
Silicon carbide
1 Citation (Scopus)

Amplitude controlled array transducers for mode selection and beam steering of guided waves in plates

Kannajosyula, H., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Review of Progress in Quantitative Nondestructive Evaluation, Volume 32. Chimenti, D. E. & Thompson, D. O. (eds.). American Institute of Physics Inc., p. 215-222 8 p. (AIP Conference Proceedings; vol. 1511).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

beam steering
transducers
apodization
phased arrays
linear arrays
16 Citations (Scopus)

Analysis of annular phased array transducers for ultrasonic guided wave mode control

Kannajosyula, H., Lissenden, III, C. J. & Rose, J. L., Aug 1 2013, In : Smart Materials and Structures. 22, 8, 085019.

Research output: Contribution to journalArticle

Guided electromagnetic wave propagation
Ultrasonic waves
phased arrays
Transducers
transducers
30 Citations (Scopus)

Analysis of second harmonic guided waves in pipes using a large-radius asymptotic approximation for axis-symmetric longitudinal modes

Chillara, V. K. & Lissenden, III, C. J., Apr 1 2013, In : Ultrasonics. 53, 4, p. 862-869 8 p.

Research output: Contribution to journalArticle

wave generation
harmonics
radii
approximation
formulations

Analysis of ultrasonic guided wave interaction with a waveguide transition

Puthillath, P., Lissenden, III, C. J., Rose, J. L. & Galan, J. M., Jul 16 2012, Review of Progress in Quantitative Nondestructive Evaluation. 31 ed. Vol. 1430. p. 1315-1322 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wave interaction
ultrasonics
waveguides
stringers
structural health monitoring
4 Citations (Scopus)
Debonding
Fibers
Composite materials
Metals
Ductility
11 Citations (Scopus)

A non-intrusive technique for on-line shaft crack detection and tracking

Lebold, M. S., Maynard, K., Reichard, K. M., Trethewey, M. W., Hasker, J., Lissenden, III, C. J. & Dobbins, D., Dec 1 2005, Proceedings - 2005 IEEE Aerospace Conference. 1559672. (IEEE Aerospace Conference Proceedings; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack detection
Crack propagation
Cracks
Coolants
Rotors
12 Citations (Scopus)

Applications of finite element analysis for undergraduates

Lissenden, III, C. J., Wagle, G. S. & Salamon, N. J., Dec 1 2002, In : ASEE Annual Conference Proceedings. p. 7701-7707 7 p.

Research output: Contribution to journalConference article

Students
Finite element method
Software packages
Mechanics
Teaching

Applied sciences special issue: Ultrasonic guidedwaves

Lissenden, III, C. J., Sep 1 2019, In : Applied Sciences (Switzerland). 9, 18, 3869.

Research output: Contribution to journalEditorial

Open Access
ultrasonics
Ultrasonics
3 Citations (Scopus)

Assessment of coating layers on the accuracy of displacement measurement in laser Doppler vibrometry

Hasanian, M. & Lissenden, III, C. J., Feb 16 2017, 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 36. Bond, L. J. & Chimenti, D. E. (eds.). American Institute of Physics Inc., Vol. 1806. 050006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

displacement measurement
tapes
coatings
lasers
vibration meters
2 Citations (Scopus)

Axial-torsional load effects of Haynes 188 at 650°C

Lissenden, III, C. J., Walker, M. A. & Lerch, B. A., Jan 1 2000, In : ASTM Special Technical Publication. 1387, p. 99-125 27 p.

Research output: Contribution to journalArticle

Viscoplasticity
Strain rate
Shear stress
Cobalt
Technical presentations
Mechanics
Students
Systems engineering
1 Citation (Scopus)

Change propagation during prototyping: A case study of a robotic inspection system for dry nuclear waste storage casks

Bracken, J., Brennan, S. N., Lissenden, III, C. J., Simpson, T. W., Van Sant, I., Reichard, K. M. & Ng, M., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design Structure Matrix
Prototyping
Radioactive wastes
Inspection
Robotics

Characterization of Damage in Shielding Structures of Space Vehicles under Hypervelocity Impact

Liu, M., Lissenden, III, C. J., Wang, Q., Su, Z., Zhang, Q. & Long, R., Jan 1 2017, In : Procedia Engineering. 188, p. 286-292 7 p.

Research output: Contribution to journalConference article

Debris
Shielding
Guided electromagnetic wave propagation
Aluminum
Damage detection
9 Citations (Scopus)

Characterizing hypervelocity impact (HVI)-induced pitting damage using active guided ultrasonic waves: From linear to nonlinear

Liu, M., Wang, K., Lissenden, III, C. J., Wang, Q., Zhang, Q., Long, R., Su, Z. & Cui, F., May 18 2017, In : Materials. 10, 5, 547.

Research output: Contribution to journalArticle

Guided electromagnetic wave propagation
Ultrasonic waves
Pitting
Shielding
Projectiles
1 Citation (Scopus)

Clamping resonators for low-frequency S0 Lamb wave reflection

Hakoda, C., Lissenden, III, C. J. & Shokouhi, P., Jan 12 2019, In : Applied Sciences (Switzerland). 9, 2, 257.

Research output: Contribution to journalArticle

wave reflection
Lamb waves
Surface waves
Resonators
resonators
16 Citations (Scopus)

Comparison of micromechanical models for elastic properties

Lissenden, III, C. J. & Herakovich, C. T., 1992, Proc 3 Int Conf Eng Constr Oper Space Space 92. Publ by ASCE, p. 1309-1322 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite materials
Graphite
Glass

Comparison of quasi-Rayleigh waves and Rayleigh waves, and clarifying the cut-off frequency of quasi-Rayleigh waves

Hakoda, C. & Lissenden, III, C. J., Feb 1 2019, In : Ultrasonics. 92, p. 50-56 7 p.

Research output: Contribution to journalArticle

Rayleigh waves
cut-off
elastodynamics
eccentricity
phase velocity

Composite piezoelectric strip transducer development for structural health monitoring

Li, S. & Lissenden, III, C. J., May 24 2011, Health Monitoring of Structural and Biological Systems 2011. Vol. 7984. 798408

Research output: Chapter in Book/Report/Conference proceedingConference contribution

structural health monitoring
Structural health monitoring
Health Monitoring
Finite Element Simulation
Transducer
8 Citations (Scopus)

Constitutive model for third harmonic generation in elastic solids

Chillara, V. K. & Lissenden, III, C. J., Jun 1 2016, In : International Journal of Non-Linear Mechanics. 82, p. 69-74 6 p.

Research output: Contribution to journalArticle

Harmonic Generation
Constitutive Model
Harmonic generation
Constitutive models
Harmonic
4 Citations (Scopus)

Continuous piezoelectric health monitoring systems based on ultrasonic guided waves

Lissenden, III, C. J., Li, S. & Rose, J. L., Jun 18 2010, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010. Vol. 7647. 764725

Research output: Chapter in Book/Report/Conference proceedingConference contribution

systems health monitoring
Ultrasonic Wave
Guided Waves
Guided electromagnetic wave propagation
Ultrasonic waves

Critique of macro flow/damage surface representations for metal matrix composites using micromechanics

Lissenden, III, C. J. & Arnold, S. M., 1996, Advanced Materials: Development, Characterization Processing, and Mechanical Behavior. Nicholas, T. (ed.). ASME, Vol. 74. p. 263 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite micromechanics
Macros
Metals
Debonding
Micromechanics
Composite micromechanics
micromechanics
metal matrix composites
Macros
damage

Cumulative second harmonics in a nonlinear transversely isotropic plate

Zhao, J., Chillara, V. K., Cho, H., Qiu, J. & Lissenden, III, C. J., Jan 1 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase matching
Guided electromagnetic wave propagation
Harmonic generation
Strain energy
Surface waves
12 Citations (Scopus)

Cumulative second harmonics in weakly nonlinear plates and shells

Liu, Y., Lissenden, III, C. J. & Rose, J. L., 2013, Health Monitoring of Structural and Biological Systems 2013. Vol. 8695. 86950S

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shell
Harmonic
Pipe
harmonics
Health Monitoring
31 Citations (Scopus)

Damage detection by piezoelectric patches in a free vibration method

Jian, X. H., Tzou, H. S., Lissenden, III, C. J. & Penn, L. S., Jan 1 1997, In : Journal of Composite Materials. 31, 4, p. 345-359 15 p.

Research output: Contribution to journalArticle

Damage detection
Delamination
Glass fibers
Frequency response
Natural frequencies
1 Citation (Scopus)

Damage induced room temperature creep of titanium matrix composites

Lissenden, III, C. J., Herakovich, C. T. & Pindera, M. J., Dec 1 1994, p. 39-49. 11 p.

Research output: Contribution to conferencePaper

Creep
Titanium
Composite materials
Debonding
Temperature
1 Citation (Scopus)

Defect sensitivity of piezoelectric strip transducers based on planar Lamb waves

Soorgee, M. H., Lissenden, III, C. J., Rose, J. L. & Yousefi-Koma, A., Mar 1 2014, In : Journal of Intelligent Material Systems and Structures. 25, 4, p. 472-483 12 p.

Research output: Contribution to journalArticle

Surface waves
Transducers
Defects
Guided electromagnetic wave propagation
Damage detection
1 Citation (Scopus)

Design project design for an elementary strength of materials course

Lissenden, III, C. J., Salamon, N. & Miller, A., Jan 1 2008, In : ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Contribution to journalConference article

Strength of materials
Students
Drawing (graphics)
Conceptual design
Materials properties
2 Citations (Scopus)

Design project for advanced mechanics of materials

Lissenden, III, C. J., Wagle, G. S. & Salamon, N. J., Dec 1 2002, In : ASEE Annual Conference Proceedings. p. 7683-7691 9 p.

Research output: Contribution to journalConference article

Mechanics
Students
Bicycles
Torsional stress
Design of experiments
5 Citations (Scopus)

Design Project for Advanced Mechanics of Materials

Lissenden, III, C. J. & Salamon, N. J., Feb 17 2004, In : International Journal of Engineering Education. 20, 1, p. 103-112 10 p.

Research output: Contribution to journalArticle

mechanic
Mechanics
Students
student
graduate

Development of robotic multisensor inspection system for used nuclear fuel canisters

Lissenden, III, C. J., Motta, A. T., Brennan, S. N., Reichard, K. M., Jovanovic, I., Knight, T. & Popovics, J., Jan 1 2016, In : Transactions of the American Nuclear Society. 115, p. 201-204 4 p.

Research output: Contribution to journalConference article

Crack detection
Nuclear fuels
Surface structure
Robotics
Inspection
2 Citations (Scopus)

Directional nonlinear guided wave mixing: Case study of counter-propagating shear horizontal waves

Hasanian, M. & Lissenden, III, C. J., Apr 20 2018, 44th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 37. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., 070002. (AIP Conference Proceedings; vol. 1949).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

counters
shear
transducers
vibration meters
Lamb waves
1 Citation (Scopus)

Directivity profiles of ultrasonic guided wave phased arrays for multilayer composite plates

Yan, F., Lissenden, III, C. J. & Rose, J. L., Jun 15 2009, Health Monitoring of Structural and Biological Systems 2009. 729514. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7295).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phased Array
Ultrasonic Wave
Guided Waves
Composite Plates
Guided electromagnetic wave propagation
5 Citations (Scopus)

Dynamic coercivity of advanced ferritic steel during long-term isothermal ageing

Kim, C. S., Lissenden, III, C. J., Park, I. K. & Ryu, K. S., Nov 1 2009, In : Materials Transactions. 50, 11, p. 2691-2694 4 p.

Research output: Contribution to journalArticle

Ferritic steel
Coercive force
coercivity
Aging of materials
steels

Effectiveness of engineering design focus in strength of materials

Lissenden, III, C. J., Van Meter, P. N. & Salamon, N. J., Dec 1 2010, 40th Annual Frontiers in Education Conference: Celebrating Forty Years of Innovation, FIE 2010 - Conference Program. 5673431. (Proceedings - Frontiers in Education Conference, FIE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strength of materials
engineering
Students
student
semester
2 Citations (Scopus)

Effect of load and temperature changes on nonlinear ultrasonic Measurements: Implications for SHM

Chillara, V. K., Cho, H., Hasanian, M. & Lissenden, III, C. J., Jan 1 2015, Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring, IWSHM 2015. Chang, F-K. & Kopsaftopoulos, F. (eds.). DEStech Publications, p. 783-790 8 p. (Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring, IWSHM 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic measurement
Guided electromagnetic wave propagation
Ultrasonics
Transducers
Temperature
2 Citations (Scopus)

Effect of localized microstructural evolution on higher harmonic generation of guided wave modes

Choi, G., Liu, Y., Yao, X. & Lissenden, III, C. J., Jan 1 2015, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 34. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., p. 1592-1598 7 p. (AIP Conference Proceedings; vol. 1650).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

harmonic generations
plastics
transducers
damage
harmonics
33 Citations (Scopus)

Effect of localized microstructure evolution on higher harmonic generation of guided waves

Lissenden, III, C. J., Liu, Y., Choi, G. W. & Yao, X., Jan 1 2014, In : Journal of Nondestructive Evaluation. 33, 2, p. 178-186 9 p.

Research output: Contribution to journalArticle

Guided electromagnetic wave propagation
Harmonic generation
Plastic deformation
Microstructure
Plastics
2 Citations (Scopus)

Effect of localized plastic deformation on higher harmonic guided wave mode generation in plate

Liu, Y., Choi, G., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM 2013. Chang, F-K. (ed.). DEStech Publications, Vol. 2. p. 1992-1999 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Plastics
Plastic deformation
Ultrasonic waves
Finite Element Analysis
5 Citations (Scopus)

Effect of microstructural architecture on flow/damage surfaces for metal matrix composites

Lissenden, III, C. J. & Arnold, S. M., Dec 1 1998, In : Studies in Applied Mechanics. 46, C, p. 385-400 16 p.

Research output: Contribution to journalArticle

Composite materials
Metals
Viscoplasticity
Micromechanics
Fibers

Effect of skew angle on second harmonic guided wave measurement in composite plates

Cho, H., Choi, S. & Lissenden, III, C. J., Feb 16 2017, 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 36. Bond, L. J. & Chimenti, D. E. (eds.). American Institute of Physics Inc., 060002. (AIP Conference Proceedings; vol. 1806).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

harmonics
composite materials
harmonic generations
anisotropic media
laminates
2 Citations (Scopus)

Electromagnetic acoustic transducer (EMAT) development for nondestructive inspection of spent nuclear fuel storage canisters

Cho, H., Choi, S., Lissenden, III, C. J. & Lindsey, M. S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustic transducers
Fuel storage
Spent fuels
Nuclear fuels
Inspection