• 1493 Citations
  • 21 h-Index
1992 …2019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1992 2019

Article
55 Citations (Scopus)

3D finite element analysis of particle-reinforced aluminum

Shen, H. & Lissenden, III, C. J., Dec 15 2002, In : Materials Science and Engineering A. 338, 1-2, p. 271-281 11 p.

Research output: Contribution to journalArticle

Aluminum
aluminum
Finite element method
strain distribution
stress distribution
7 Citations (Scopus)
Guided electromagnetic wave propagation
shear
sensors
Sensors
Health
6 Citations (Scopus)

A Methodology for Determining Rate-Dependent Flow Surfaces for Inconel 718

Lissenden, III, C. J., Gil, C. M. & Lerch, B. A., Nov 1 1999, In : Journal of Testing and Evaluation. 27, 6, p. 402-411 10 p.

Research output: Contribution to journalArticle

Experiments
Aviation
Shear stress
Strain rate
Precipitates
8 Citations (Scopus)

A more comprehensive method for yield locus construction for metallic alloys and composites

Lissenden, III, C. J. & Lei, X., Jan 1 2004, In : Experimental Mechanics. 44, 1, p. 10-20 11 p.

Research output: Contribution to journalArticle

Composite materials
Aluminum
Hardening
Titanium alloys
Silicon carbide
16 Citations (Scopus)

Analysis of annular phased array transducers for ultrasonic guided wave mode control

Kannajosyula, H., Lissenden, III, C. J. & Rose, J. L., Aug 1 2013, In : Smart Materials and Structures. 22, 8, 085019.

Research output: Contribution to journalArticle

Guided electromagnetic wave propagation
Ultrasonic waves
phased arrays
Transducers
transducers
30 Citations (Scopus)

Analysis of second harmonic guided waves in pipes using a large-radius asymptotic approximation for axis-symmetric longitudinal modes

Chillara, V. K. & Lissenden, III, C. J., Apr 1 2013, In : Ultrasonics. 53, 4, p. 862-869 8 p.

Research output: Contribution to journalArticle

wave generation
harmonics
radii
approximation
formulations
4 Citations (Scopus)
Debonding
Fibers
Composite materials
Metals
Ductility
2 Citations (Scopus)

Axial-torsional load effects of Haynes 188 at 650°C

Lissenden, III, C. J., Walker, M. A. & Lerch, B. A., Jan 1 2000, In : ASTM Special Technical Publication. 1387, p. 99-125 27 p.

Research output: Contribution to journalArticle

Viscoplasticity
Strain rate
Shear stress
Cobalt
9 Citations (Scopus)

Characterizing hypervelocity impact (HVI)-induced pitting damage using active guided ultrasonic waves: From linear to nonlinear

Liu, M., Wang, K., Lissenden, III, C. J., Wang, Q., Zhang, Q., Long, R., Su, Z. & Cui, F., May 18 2017, In : Materials. 10, 5, 547.

Research output: Contribution to journalArticle

Guided electromagnetic wave propagation
Ultrasonic waves
Pitting
Shielding
Projectiles
1 Citation (Scopus)

Clamping resonators for low-frequency S0 Lamb wave reflection

Hakoda, C., Lissenden, III, C. J. & Shokouhi, P., Jan 12 2019, In : Applied Sciences (Switzerland). 9, 2, 257.

Research output: Contribution to journalArticle

wave reflection
Lamb waves
Surface waves
Resonators
resonators

Comparison of quasi-Rayleigh waves and Rayleigh waves, and clarifying the cut-off frequency of quasi-Rayleigh waves

Hakoda, C. & Lissenden, III, C. J., Feb 1 2019, In : Ultrasonics. 92, p. 50-56 7 p.

Research output: Contribution to journalArticle

Rayleigh waves
cut-off
elastodynamics
eccentricity
phase velocity
8 Citations (Scopus)

Constitutive model for third harmonic generation in elastic solids

Chillara, V. K. & Lissenden, III, C. J., Jun 1 2016, In : International Journal of Non-Linear Mechanics. 82, p. 69-74 6 p.

Research output: Contribution to journalArticle

Harmonic Generation
Constitutive Model
Harmonic generation
Constitutive models
Harmonic
Composite micromechanics
micromechanics
metal matrix composites
Macros
damage
31 Citations (Scopus)

Damage detection by piezoelectric patches in a free vibration method

Jian, X. H., Tzou, H. S., Lissenden, III, C. J. & Penn, L. S., Jan 1 1997, In : Journal of Composite Materials. 31, 4, p. 345-359 15 p.

Research output: Contribution to journalArticle

Damage detection
Delamination
Glass fibers
Frequency response
Natural frequencies
1 Citation (Scopus)

Defect sensitivity of piezoelectric strip transducers based on planar Lamb waves

Soorgee, M. H., Lissenden, III, C. J., Rose, J. L. & Yousefi-Koma, A., Mar 1 2014, In : Journal of Intelligent Material Systems and Structures. 25, 4, p. 472-483 12 p.

Research output: Contribution to journalArticle

Surface waves
Transducers
Defects
Guided electromagnetic wave propagation
Damage detection
5 Citations (Scopus)

Design Project for Advanced Mechanics of Materials

Lissenden, III, C. J. & Salamon, N. J., Feb 17 2004, In : International Journal of Engineering Education. 20, 1, p. 103-112 10 p.

Research output: Contribution to journalArticle

mechanic
Mechanics
Students
student
graduate
5 Citations (Scopus)

Dynamic coercivity of advanced ferritic steel during long-term isothermal ageing

Kim, C. S., Lissenden, III, C. J., Park, I. K. & Ryu, K. S., Nov 1 2009, In : Materials Transactions. 50, 11, p. 2691-2694 4 p.

Research output: Contribution to journalArticle

Ferritic steel
Coercive force
coercivity
Aging of materials
steels
33 Citations (Scopus)

Effect of localized microstructure evolution on higher harmonic generation of guided waves

Lissenden, III, C. J., Liu, Y., Choi, G. W. & Yao, X., Jan 1 2014, In : Journal of Nondestructive Evaluation. 33, 2, p. 178-186 9 p.

Research output: Contribution to journalArticle

Guided electromagnetic wave propagation
Harmonic generation
Plastic deformation
Microstructure
Plastics
5 Citations (Scopus)

Effect of microstructural architecture on flow/damage surfaces for metal matrix composites

Lissenden, III, C. J. & Arnold, S. M., Dec 1 1998, In : Studies in Applied Mechanics. 46, C, p. 385-400 16 p.

Research output: Contribution to journalArticle

Composite materials
Metals
Viscoplasticity
Micromechanics
Fibers
4 Citations (Scopus)

Electromagnetic acoustic transducers for robotic nondestructive inspection in harsh environments

Choi, S., Cho, H., Lindsey, M. S. & Lissenden, III, C. J., Jan 11 2018, In : Sensors (Switzerland). 18, 1, 193.

Research output: Contribution to journalArticle

Acoustic transducers
Electromagnetic Phenomena
Robotics
robotics
Transducers
12 Citations (Scopus)

Experimental determination of yield and flow surfaces under axial-torsional loading

Lissenden, III, C. J., Lerch, B. A., Ellis, J. R. & Robinson, D. N., Jan 1 1996, In : ASTM Special Technical Publication. 1280, p. 92-112 21 p.

Research output: Contribution to journalArticle

Dilatometers
Plasticity
Strain rate
Strain gages
Stainless steel
20 Citations (Scopus)

Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature

Lissenden, III, C. J., Doraiswamy, D. & Arnold, S. M., Jan 1 2007, In : International journal of plasticity. 23, 1, p. 1-24 24 p.

Research output: Contribution to journalArticle

Titanium alloys
Temperature
Stress relaxation
Strain rate
Creep
9 Citations (Scopus)
Metals
Composite materials
Laminates
Hardening
Aluminum
3 Citations (Scopus)

Fatigue of beta titanium alloy at 20, 482 and 648 °C

Solimine, P. A. & Lissenden, III, C. J., Oct 1 2004, In : Fatigue and Fracture of Engineering Materials and Structures. 27, 10, p. 943-955 13 p.

Research output: Contribution to journalArticle

Titanium alloys
Fatigue of materials
Fibers
Composite materials
beta titanium
25 Citations (Scopus)

Fiber-matrix interfacial constitutive relations for metal matrix composites

Lissenden, III, C. J., Jan 1 1999, In : Composites Part B: Engineering. 30, 3, p. 267-278 12 p.

Research output: Contribution to journalArticle

Metals
Fibers
Debonding
Composite materials
Ductility
1 Citation (Scopus)
Nodular iron
Forging
Geometry
Quenching
Plastic deformation
16 Citations (Scopus)

Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures

Lissenden, III, C. J., Arnold, S. M. & Iyer, S. K., Aug 7 2000, In : International journal of plasticity. 16, 9, p. 1049-1074 26 p.

Research output: Contribution to journalArticle

Fiber reinforced metals
Microstructure
Micromechanics
Fibers
Debonding
19 Citations (Scopus)

Guided wave mode selection for inhomogeneous elastic waveguides using frequency domain finite element approach

Chillara, V. K., Ren, B. & Lissenden, III, C. J., Apr 1 2016, In : Ultrasonics. 67, p. 199-211 13 p.

Research output: Contribution to journalArticle

Fourier Analysis
waveguides
recommendations
inspection
shear
8 Citations (Scopus)

Hardening behavior of three metallic alloys under combined stresses at elevated temperature

Lissenden, III, C. J., Colaiuta, J. F. & Lerch, B. A., May 1 2004, In : Acta Mechanica. 169, 1-4, p. 53-77 25 p.

Research output: Contribution to journalArticle

Hardening
Temperature
Dilatometers
Shear strain
Strengthening (metal)
21 Citations (Scopus)

Higher order interaction of elastic waves in weakly nonlinear hollow circular cylinders. I. Analytical foundation

Liu, Y., Lissenden, III, C. J. & Rose, J. L., Jun 7 2014, In : Journal of Applied Physics. 115, 21, 214901.

Research output: Contribution to journalArticle

circular cylinders
elastic waves
hollow
harmonics
interactions
25 Citations (Scopus)
circular cylinders
elastic waves
hollow
harmonics
harmonic generations
13 Citations (Scopus)
Inconel (trademark)
Anisotropy
anisotropy
Experiments
Martensitic steel
Anisotropy
Experiments
Martensitic steel
Hydrostatic pressure
Torsional stress
12 Citations (Scopus)

Influence of precipitates and dislocations on the acoustic nonlinearity in metallic materials

Seok Kim, C., Kwun, S. I. & Lissenden, III, C. J., Aug 1 2009, In : Journal of the Korean Physical Society. 55, 2, p. 528-532 5 p.

Research output: Contribution to journalArticle

precipitates
nonlinearity
acoustics
carbides
steels
59 Citations (Scopus)

Interaction of guided wave modes in isotropic weakly nonlinear elastic plates: Higher harmonic generation

Krishna Chillara, V. & Lissenden, III, C. J., Jun 15 2012, In : Journal of Applied Physics. 111, 12, 124909.

Research output: Contribution to journalArticle

elastic plates
harmonic generations
harmonics
interactions
methodology
24 Citations (Scopus)

Interaction of torsional and longitudinal guided waves in weakly nonlinear circular cylinders

Liu, Y., Khajeh, E., Lissenden, III, C. J. & Rose, J. L., May 1 2013, In : Journal of the Acoustical Society of America. 133, 5, p. 2541-2553 13 p.

Research output: Contribution to journalArticle

circular cylinders
interactions
harmonic generations
S waves
harmonics
10 Citations (Scopus)

Interfacial debonding in laminated titanium matrix composites

Lissenden, III, C. J. & Herakovich, C. T., Jan 1 1996, In : Mechanics of Materials. 22, 4, p. 279-290 12 p.

Research output: Contribution to journalArticle

Debonding
Titanium
titanium
composite materials
Composite materials
15 Citations (Scopus)

Local and overall flow in composites predicted by micromechanics

Iyer, S. K., Lissenden, III, C. J. & Arnold, S. M., Jan 1 2000, In : Composites Part B: Engineering. 31, 4, p. 327-343 17 p.

Research output: Contribution to journalArticle

Micromechanics
Composite materials
Residual stresses
Strain rate
Metals
3 Citations (Scopus)

Maxwell stress distributions in chiral sculptured thin films due to obliquely incident plane waves

Ross, B. M., Lakhtakia, A. & Lissenden, III, C. J., Jul 1 2007, In : Optics Communications. 275, 1, p. 1-9 9 p.

Research output: Contribution to journalArticle

stress distribution
Stress concentration
plane waves
Thin films
thin films
13 Citations (Scopus)

Modal content-based damage indicators for disbonds in adhesively bonded composite structures

Ren, B. & Lissenden, III, C. J., Sep 1 2016, In : Structural Health Monitoring. 15, 5, p. 491-504 14 p.

Research output: Contribution to journalArticle

Composite structures
Adhesives
Finite Element Analysis
Guided electromagnetic wave propagation
Structural health monitoring
6 Citations (Scopus)
Guided electromagnetic wave propagation
wave excitation
Physics
physics
expansion
41 Citations (Scopus)

Multiaxial constitutive model accounting for the strength-differential in Inconel 718

Iyer, S. K. & Lissenden, III, C. J., Jan 1 2003, In : International journal of plasticity. 19, 12 SPEC ISS., p. 2055-2081 27 p.

Research output: Contribution to journalArticle

Constitutive models
Plastic flow
Plasticity
Shear strain
Nickel

New nonlinear ultrasonic method for material characterization: Codirectional shear horizontal guided wave mixing in plate

Shan, S., Hasanian, M., Cho, H., Lissenden, III, C. J. & Cheng, L., Jul 1 2019, In : Ultrasonics. 96, p. 64-74 11 p.

Research output: Contribution to journalArticle

Lamb waves
ultrasonics
shear
wave generation
gels
3 Citations (Scopus)

Nondestructive inspection of spent nuclear fuel storage canisters using shear horizontal guided waves

Choi, S., Cho, H. & Lissenden, III, C. J., Aug 1 2018, In : Nuclear Engineering and Technology. 50, 6, p. 890-898 9 p.

Research output: Contribution to journalArticle

Fuel storage
Guided electromagnetic wave propagation
Spent fuels
Nuclear fuels
Inspection
48 Citations (Scopus)

Nonlinear guided waves in plates: A numerical perspective

Chillara, V. K. & Lissenden, III, C. J., Jan 1 2014, In : Ultrasonics. 54, 6, p. 1553-1558 6 p.

Research output: Contribution to journalArticle

harmonic generations
nonlinearity
harmonics
group velocity
elastic properties
2 Citations (Scopus)
Lamb waves
Guided electromagnetic wave propagation
Damage detection
Surface waves
shear
49 Citations (Scopus)

Numerical modelling of damage development and viscoplasticity in metal matrix composites

Lissenden, III, C. J. & Herakovich, C. T., Jan 1 1995, In : Computer Methods in Applied Mechanics and Engineering. 126, 3-4, p. 289-303 15 p.

Research output: Contribution to journalArticle

viscoplasticity
Viscoplasticity
metal matrix composites
fiber-matrix interfaces
damage
77 Citations (Scopus)

On selection of primary modes for generation of strong internally resonant second harmonics in plate

Liu, Y., Chillara, V. K. & Lissenden, III, C. J., Sep 16 2013, In : Journal of Sound and Vibration. 332, 19, p. 4517-4528 12 p.

Research output: Contribution to journalArticle

shear
harmonics
group velocity
Surface waves
S waves
6 Citations (Scopus)
Harmonic generation
Ultrasonics
Microstructure
Anisotropy
Acoustics

On the use of oblique acoustic leakage to measure the wavenumber spectrum of propagating lamb waves

Hakoda, C., Hasanian, M. & Lissenden, III, C. J., Mar 2 2019, In : Sensors (Switzerland). 19, 6, 1391.

Research output: Contribution to journalArticle

Open Access
Lamb waves
Acoustics
Surface waves
Transducers
leakage