• 1570 Citations
  • 21 h-Index
1992 …2019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1992 2019

Conference contribution
16 Citations (Scopus)

Comparison of micromechanical models for elastic properties

Lissenden, III, C. J. & Herakovich, C. T., 1992, Proc 3 Int Conf Eng Constr Oper Space Space 92. Publ by ASCE, p. 1309-1322 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite materials
Graphite
Glass

Composite piezoelectric strip transducer development for structural health monitoring

Li, S. & Lissenden, III, C. J., May 24 2011, Health Monitoring of Structural and Biological Systems 2011. Vol. 7984. 798408

Research output: Chapter in Book/Report/Conference proceedingConference contribution

structural health monitoring
Structural health monitoring
Health Monitoring
Finite Element Simulation
Transducer
4 Citations (Scopus)

Continuous piezoelectric health monitoring systems based on ultrasonic guided waves

Lissenden, III, C. J., Li, S. & Rose, J. L., Jun 18 2010, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010. Vol. 7647. 764725

Research output: Chapter in Book/Report/Conference proceedingConference contribution

systems health monitoring
Ultrasonic Wave
Guided Waves
Guided electromagnetic wave propagation
Ultrasonic waves

Critique of macro flow/damage surface representations for metal matrix composites using micromechanics

Lissenden, III, C. J. & Arnold, S. M., 1996, Advanced Materials: Development, Characterization Processing, and Mechanical Behavior. Nicholas, T. (ed.). ASME, Vol. 74. p. 263 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite micromechanics
Macros
Metals
Debonding
Micromechanics

Cumulative second harmonics in a nonlinear transversely isotropic plate

Zhao, J., Chillara, V. K., Cho, H., Qiu, J. & Lissenden, C. J., Jan 1 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase matching
Guided electromagnetic wave propagation
Harmonic generation
Strain energy
Surface waves
12 Citations (Scopus)

Cumulative second harmonics in weakly nonlinear plates and shells

Liu, Y., Lissenden, C. J. & Rose, J. L., Jun 10 2013, Health Monitoring of Structural and Biological Systems 2013. 86950S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8695).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shell
Harmonic
Pipe
harmonics
Health Monitoring
2 Citations (Scopus)

Directional nonlinear guided wave mixing: Case study of counter-propagating shear horizontal waves

Hasanian, M. & Lissenden, C. J., Apr 20 2018, 44th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 37. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., 070002. (AIP Conference Proceedings; vol. 1949).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

counters
shear
transducers
vibration meters
Lamb waves
1 Citation (Scopus)

Directivity profiles of ultrasonic guided wave phased arrays for multilayer composite plates

Yan, F., Lissenden, III, C. J. & Rose, J. L., Jun 15 2009, Health Monitoring of Structural and Biological Systems 2009. 729514. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7295).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phased Array
Ultrasonic Wave
Guided Waves
Composite Plates
Guided electromagnetic wave propagation

Effectiveness of engineering design focus in strength of materials

Lissenden, III, C. J., Van Meter, P. N. & Salamon, N. J., Dec 1 2010, 40th Annual Frontiers in Education Conference: Celebrating Forty Years of Innovation, FIE 2010 - Conference Program. 5673431. (Proceedings - Frontiers in Education Conference, FIE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strength of materials
engineering
Students
student
semester
2 Citations (Scopus)

Effect of load and temperature changes on nonlinear ultrasonic Measurements: Implications for SHM

Chillara, V. K., Cho, H., Hasanian, M. & Lissenden, C. J., Jan 1 2015, Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring, IWSHM 2015. Chang, F-K. & Kopsaftopoulos, F. (eds.). DEStech Publications, p. 783-790 8 p. (Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring, IWSHM 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic measurement
Guided electromagnetic wave propagation
Ultrasonics
Transducers
Temperature
2 Citations (Scopus)

Effect of localized microstructural evolution on higher harmonic generation of guided wave modes

Choi, G., Liu, Y., Yao, X. & Lissenden, III, C. J., Jan 1 2015, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 34. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., p. 1592-1598 7 p. (AIP Conference Proceedings; vol. 1650).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

harmonic generations
plastics
transducers
damage
harmonics
2 Citations (Scopus)

Effect of localized plastic deformation on higher harmonic guided wave mode generation in plate

Liu, Y., Choi, G., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM 2013. Chang, F-K. (ed.). DEStech Publications, Vol. 2. p. 1992-1999 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Plastics
Plastic deformation
Ultrasonic waves
Finite Element Analysis

Effect of skew angle on second harmonic guided wave measurement in composite plates

Cho, H., Choi, S. & Lissenden, C. J., Feb 16 2017, 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 36. Bond, L. J. & Chimenti, D. E. (eds.). American Institute of Physics Inc., 060002. (AIP Conference Proceedings; vol. 1806).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

harmonics
composite materials
harmonic generations
anisotropic media
laminates
2 Citations (Scopus)

Electromagnetic acoustic transducer (EMAT) development for nondestructive inspection of spent nuclear fuel storage canisters

Cho, H., Choi, S., Lissenden, III, C. J. & Lindsey, M. S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustic transducers
Fuel storage
Spent fuels
Nuclear fuels
Inspection

Evaluation of fatigue damage accumulation in composites via linear and nonlinear guided wave methods

Zhao, J., Chillara, V., Cho, H., Qiu, J. & Lissenden, C., Feb 10 2016, 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation: Incorporating the 6th European-American Workshop on Reliability of NDE. Bond, L. J. & Chimenti, D. E. (eds.). American Institute of Physics Inc., 120007. (AIP Conference Proceedings; vol. 1706).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

phase velocity
damage
composite materials
evaluation
modulus of elasticity
4 Citations (Scopus)

Fatigue and ratcheting experimental responses of alloy 617 under high temperature multiaxial loading

Quayyum, S., Sengupta, M., Choi, G., Lissenden, III, C. J. & Hassan, T., Dec 1 2013, ASME 2013 Pressure Vessels and Piping Conference, PVP 2013. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat exchangers
Creep
Fatigue of materials
Strain rate
Temperature
5 Citations (Scopus)

Fatigue crack growth monitoring of an aluminum joint structure

Lissenden, C. J., Cho, H. & Kim, C. S., Apr 1 2010, Review of Progress in Quantitative Nondestructive Evaluation. p. 1868-1875 8 p. (AIP Conference Proceedings; vol. 1211).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cracks
aluminum
fasteners
sizing
linear arrays
1 Citation (Scopus)

Field deployable processing methods for stay-in-place ultrasonic transducers

Malarich, N., Lissenden, C. J. & Tittmann, B. R., Apr 20 2018, 44th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 37. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., 100002. (AIP Conference Proceedings; vol. 1949).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

guy wires
transducers
ultrasonics
sprayers
induction heating
1 Citation (Scopus)

Field deployable spray-on ultrasonic coatings for high-temperature applications

Trivedi, Y., Tittmann, B. R., Batista, C., Xu, J. & Lissenden, C., May 8 2019, 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38. Laflamme, S., Holland, S. & Bond, L. J. (eds.). American Institute of Physics Inc., 060008. (AIP Conference Proceedings; vol. 2102).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
films (materials)
spray
coatings
sprayers
coating
2 Citations (Scopus)

Guided wave mode and frequency selection tips

Rose, J. L. & Lissenden, III, C. J., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., p. 358-364 7 p. (AIP Conference Proceedings; vol. 1581 33).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ultrasonics
evaluation
4 Citations (Scopus)

Guided wave mode conversions across waveguide transitions: A study using frequency domain finite element method

Chillara, V. K. & Lissenden, III, C. J., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., Vol. 1581 33. p. 308-315 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

finite element method
waveguides
stress distribution
shear
excitation

Guided wave mode pairs for transmissibility in adhesively bonded metal plates

Puthillath, P., Ren, B., Lissenden, III, C. J. & Rose, J. L., Jan 1 2013, Review of Progress in Quantitative Nondestructive Evaluation, Volume 32. Chimenti, D. E. & Thompson, D. O. (eds.). American Institute of Physics Inc., p. 199-206 8 p. (AIP Conference Proceedings; vol. 1511).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

metal plates
adhesives
waveguides
ultrasonics
evaluation

Guided wave mode Selection for microstructure-sensitive mutual wave interactions

Hasanian, M., Choi, G. & Lissenden, C. J., Jan 1 2017, Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017. Chang, F-K. & Kopsaftopoulos, F. (eds.). DEStech Publications, p. 1685-1692 8 p. (Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Fatigue
Microstructure
Ultrasonic waves
Microstructural evolution

Guided wave structural health monitoring with an array of novel piezoelectric transducers

Lesky, A. & Lissenden, III, C. J., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., p. 224-231 8 p. (AIP Conference Proceedings; vol. 1581 33).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

structural health monitoring
piezoelectric transducers
strip
transducers
dilatational waves

Health monitoring of adhesively bonded joints using multiple ultrasonic guided wave modes for improved sensitivity

Ren, B. & Lissenden, C. J., Jan 1 2015, American Helicopter Society International - Airworthiness, CBM and HUMS Specialists' Meeting 2015. American Helicopter Society International, p. 104-111 8 p. (American Helicopter Society International - Airworthiness, CBM and HUMS Specialists' Meeting 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Ultrasonic waves
Health
Defects
Monitoring
1 Citation (Scopus)

Higher harmonic guided waves in isotropic weakly non-linear elastic plates

Chillara, V. K. & Lissenden, III, C. J., Jan 1 2013, Review of Progress in Quantitative Nondestructive Evaluation, Volume 32. Chimenti, D. E. & Thompson, D. O. (eds.). American Institute of Physics Inc., p. 145-149 5 p. (AIP Conference Proceedings; vol. 1511).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

elastic plates
harmonics
wave generation

High temperature multiaxial creep-fatigue and creep-ratcheting behavior of alloy 617

Quayyum, S., Sengupta, M., Choi, G., Lissenden, C. J. & Hassan, T., Jan 1 2014, Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials - Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics. p. 83-97 15 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat exchangers
Creep
Fatigue of materials
Constitutive models
Strain rate
5 Citations (Scopus)

Influence of localized microstructure evolution on second harmonic generation of guided waves

Choi, G., Liu, Y., Lissenden, III, C. J. & Rose, J. L., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., p. 631-638 8 p. (AIP Conference Proceedings; vol. 1581 33).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

harmonic generations
microstructure
plastics
specimen geometry
damage

Influence of surface roughness from additive manufacturing on laser ultrasonics measurements

Bakre, C., Hassanian, M. & Lissenden, C., May 8 2019, 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38. Laflamme, S., Holland, S. & Bond, L. J. (eds.). American Institute of Physics Inc., 020009. (AIP Conference Proceedings; vol. 2102).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
surface roughness
lasers
ultrasonics
manufacturing
laser
5 Citations (Scopus)

Inhomogeneous interface waves in a thin layer between half spaces and their relationship to lamb waves

Kannajosyula, H., Lissenden, III, C. J. & Rose, J. L., Apr 1 2010, Review of Progress in Quantitative Nondestructive Evaluation. Vol. 1211. p. 104-110 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lamb waves
half spaces
curves
configurations
shear
1 Citation (Scopus)

In-line corrosion inspection using circumferential and longitudinal ultrasonic guided waves

Lindsey, M. S., Khajeh, E., Van Velsor, J. K., Lissenden, III, C. J. & Rose, J. L., Nov 10 2011, Review of Progress in Quantitative Nondestructive Evaluation. Vol. 1335. p. 231-238 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

inspection
corrosion
ultrasonics
casing
wave interaction

Integrated structural health monitoring with guided waves from piezoelectric fibers

Lissenden, C. J., Blackshire, J. L. & Puthillath, P. K., Dec 1 2008, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2008. p. 5-11 7 p. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2008; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Structural health monitoring
Fibers
Carbon fibers
Ultrasonic waves
2 Citations (Scopus)

Interface waves for SHM of adhesively bonded joints

Kannajosyula, H., Puthillath, P., Lissenden, III, C. J. & Rose, J. L., Jan 1 2009, Structural Health Monitoring 2009: From System Integration to Autonomous Systems - Proceedings of the 7th International Workshop on Structural Health Monitoring, IWSHM 2009. Chang, F-K. (ed.). DEStech Publications, Vol. 1. p. 247-254 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural health monitoring
Adhesives
Joints
Health
Surface waves
2 Citations (Scopus)

Internal damage detection in a laminated composite plate using ultrasonic guided waves

Lissenden, III, C. J., Yan, F., Hauck, E. T., Noga, D. M. & Rose, J. L., May 14 2007, Review of Progress in Quantitative Nondestructive Evaluation: Volume 26. p. 1029-1035 7 p. (AIP Conference Proceedings; vol. 894).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ultrasonics
damage
composite materials
wave propagation
indication

Interrogation of linear/nonlinear features of guided waves for characterizing hypervelocity impact-induced pitting damage in shielding structures

Liu, M., Lissenden, C. J., Wang, Q., Su, Z., Zhang, Q., Long, R. & Cui, F., Jan 1 2017, Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017. Chang, F-K. & Kopsaftopoulos, F. (eds.). DEStech Publications, p. 1819-1826 8 p. (Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spacecraft
Guided electromagnetic wave propagation
Pitting
Aluminum
Shielding
1 Citation (Scopus)

Lamb-like wave mode selection algorithm for multilayer plate NDE

Kannajosyula, H. & Lissenden, C. J., Nov 10 2011, Review of Progress in Quantitative Nondestructive Evaluation. p. 191-198 8 p. (AIP Conference Proceedings; vol. 1335).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lamb waves
wave dispersion
curves
adhesives
invariance
3 Citations (Scopus)

Microstructural characterization in plates using guided wave third harmonic generation

Liu, Y., Lissenden, C. J. & Rose, J. L., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., p. 639-645 7 p. (AIP Conference Proceedings; vol. 1581 33).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

harmonic generations
harmonics
synchronism
shear
excitation

Modeling guided wave propagation in curved thick composites with ply drops and marcelling

Hakoda, C., Choi, G. & Lissenden, C., Apr 20 2018, 44th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 37. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., 090008. (AIP Conference Proceedings; vol. 1949).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wave propagation
composite materials
voids
transducers
ultrasonics
2 Citations (Scopus)

Modeling ultrasonic guided wave generation from piezoelectric fiber composite strip actuators

Li, S. & Lissenden, C. J., Dec 1 2010, ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010. p. 657-665 9 p. (ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Ultrasonic waves
Actuators
Fibers
Structural health monitoring

Mode selection for structural health monitoring of composite T-joint using ultrasonic guided waves

Ren, B. & Lissenden, III, C. J., Dec 1 2013, 28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013. p. 375-385 11 p. (28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Structural health monitoring
Ultrasonic waves
Adhesives
Composite materials
1 Citation (Scopus)

Monitoring fatigue cracks in aluminum joints with ultrasonic guided waves

Cho, H. & Lissenden, C. J., Nov 10 2011, Review of Progress in Quantitative Nondestructive Evaluation. p. 145-152 8 p. (AIP Conference Proceedings; vol. 1335).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

transducers
cracks
bolted joints
ultrasonics
fasteners

Multi-element Lamb wave transducers to classify damage type and characterize size based on modal content

Ren, B. & Lissenden, C. J., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface waves
Transducers
Structural integrity
Actuators
Defects

Mutual interaction of guided waves in plate: Finite element studies

Hasanian, M., Shan, S. & Lissenden, C. J., May 8 2019, 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38. Laflamme, S., Holland, S. & Bond, L. J. (eds.). American Institute of Physics Inc., 050017. (AIP Conference Proceedings; vol. 2102).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
ultrasonics
finite element analysis
interactions
wave interaction
S waves

Nonlinear acoustics experimental characterization of microstructure evolution in Inconel 617

Yao, X., Liu, Y. & Lissenden, III, C. J., Jan 1 2014, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation - Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing. American Institute of Physics Inc., Vol. 1581 33. p. 733-738 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Inconel (trademark)
microstructure
acoustics
nonlinearity
damage
3 Citations (Scopus)

Nonlinear guided waves for continuous material microstructure state awareness

Lissenden, C. J., Liu, Y., Chillara, V. K., Choi, G. & Yao, X., Jan 1 2014, Vibration, Acoustics and Wave Propagation. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Harmonic generation
Plastic deformation
Fatigue of materials
Microstructure
1 Citation (Scopus)

Nonlinear guided waves for monitoring microstructural changes in metal structures

Choi, G., Liu, Y. & Lissenden, III, C. J., Jan 1 2015, Operations, Applications and Components. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guided electromagnetic wave propagation
Degradation
Monitoring
Shear strain
Elastic waves
6 Citations (Scopus)

Nonlinear guided waves in plates undergoing localized microstructural changes

Chillara, V. K. & Lissenden, III, C. J., Jan 1 2015, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 34. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., p. 1561-1569 9 p. (AIP Conference Proceedings; vol. 1650).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

damage
harmonic generations
wave propagation
longitudinal waves
2 Citations (Scopus)

Non-linearly phased 2-D array transducers arranged on a cylindrical-polar grid for real time guided wave mode control and steering

Kannajosyula, H., Lissenden, III, C. J. & Rose, J. L., Jul 13 2012, Review of Progress in Quantitative Nondestructive Evaluation. 31 ed. p. 945-952 8 p. (AIP Conference Proceedings; vol. 1430, no. 31).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

phased arrays
transducers
grids
ultrasonics
filters

Nuclear storage cask inspection robotics as a case study in system design challenges

Bracken, J., Brennan, S. N., Van Sant, I., Lissenden, III, C. J. & Reichard, K. M., Jan 1 2018, Design, Reliability, Safety, and Risk. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Inspection
Systems analysis
Spent fuels
Nuclear fuels

Performance of EMATs for robotic inspection of cracks in welded stainless steel canisters

Cho, H., Choi, S. & Lissenden, III, C. J., May 8 2019, 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38. Laflamme, S., Holland, S. & Bond, L. J. (eds.). American Institute of Physics Inc., 020023. (AIP Conference Proceedings; vol. 2102).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
cans
robots
transducers (equipment)
stainless steel
robotics