• 520 Citations
  • 13 h-Index
20012019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 2001 2019

Filter
Conference contribution
2018

Build height control in directed energy deposition using a model-based feed-forward controller

Wang, Q., Li, J., Nassar, A. R., Reutzel, E. W. & Mitchell, W., Jan 1 2018, Control and Optimization of Connected and Automated Ground Vehicles; Dynamic Systems and Control Education; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Energy Systems; Estimation and Identification; Intelligent Transportation and Vehicles; Manufacturing; Mechatronics; Modeling and Control of IC Engines and Aftertreatment Systems; Modeling and Control of IC Engines and Powertrain Systems; Modeling and Management of Power Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 Dynamic Systems and Control Conference, DSCC 2018; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Controllers
Feedback
Lasers
Time measurement
3D printers
4 Citations (Scopus)

Layerwise in-process quality monitoring in laser powder bed fusion

Imani, F., Gaikwad, A., Montazeri, M., Rao, P., Yang, H. & Reutzel, E. W., Jan 1 2018, Additive Manufacturing; Bio and Sustainable Manufacturing. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fusion reactions
Powders
Lasers
Monitoring
Porosity
1 Citation (Scopus)

Reliability centered additive manufacturing computational design framework

Harris, P., Laskowski, B., Reutzel, E. W., Earthman, J. C. & Hess, A. J., Jun 25 2018, 2018 IEEE Aerospace Conference, AERO 2018. IEEE Computer Society, p. 1-10 10 p. (IEEE Aerospace Conference Proceedings; vol. 2018-March).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
manufacturing
defect
corrosion
Defects
2017

Experimental comparison of a traditionally built versus additively manufactured aircraft heat exchanger

Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jan 1 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0902

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat exchangers
Aircraft
Pressure drop
Geometry
Heat transfer
1 Citation (Scopus)

Model prediction for deposition height during a direct metal deposition process

Li, J., Wang, Q., Michaleris, P. & Reutzel, E. W., Jun 29 2017, 2017 American Control Conference, ACC 2017. Institute of Electrical and Electronics Engineers Inc., p. 2188-2194 7 p. 7963277

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metals
Lasers
3D printers
Geometry
Real time control
2016
1 Citation (Scopus)

Digital data requirements for powder bed fusion additive manufacturing and the implementation of a transparent communication architecture

Dunbar, A. J., Nassar, A. R., Reutzel, E. W. & Blecher, J. J., Jan 1 2016, SAMPE Long Beach 2016 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2016-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Powders
Fusion reactions
Communication
Naproxen

Dimensional accuracy and machine variability of titanium parts manufactured using the eos direct metal laser sintered (dmls) process

Mitchell, W. F., Reutzel, E. W., Merdes, T. A. & Lang, D. C., Jan 1 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 211-215 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Reduced-order multivariable modeling and nonlinear control of melt-pool geometry and temperature in directed energy deposition

Wang, Q., Li, J., Gouge, M., Nassar, A. R., Michaleris, P. & Reutzel, E. W., Jul 28 2016, 2016 American Control Conference, ACC 2016. Institute of Electrical and Electronics Engineers Inc., p. 845-851 7 p. 7525019. (Proceedings of the American Control Conference; vol. 2016-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geometry
3D printers
Temperature
Lasers
Parameterization
6 Citations (Scopus)

Sensing for directed energy deposition and powder bed fusion additive manufacturing at Penn State University

Nassar, A. R., Reutzel, E. W., Brown, S. W., Morgan, J. P., Morgan, J. P., Natale, D. J., Tutwiler, R. L., Feck, D. P. & Banks, J. C., Jan 1 2016, Laser 3D Manufacturing III. Pique, A., Gu, B. & Helvajian, H. (eds.). SPIE, 97380R. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9738).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Powder
Powders
beds
Fusion
2015
7 Citations (Scopus)

A brief survey of sensing for metal-based powder bed fusion additive manufacturing

Foster, B. K., Reutzel, E. W., Nassar, A. R., Dickman, C. J. & Hall, B. T., Jan 1 2015, Dimensional Optical Metrology and Inspection for Practical Applications IV. Zhang, S., Yoshizawa, T. & Harding, K. G. (eds.). SPIE, 94890B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Powder
Powders
beds
Fusion
2013

Role of processing parameters on morphology, resistance and composition of laser fired contacts

Raghavan, A., Palmer, T., Domask, A., Mohney, S. E., Reutzel, E. W. & Debroy, T., 2013, Laser Material Processing for Solar Energy Devices II. Vol. 8826. 882606

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact
Laser
Lasers
Processing
Chemical analysis
2012
1 Citation (Scopus)

Challenges in the design of portable laser repair systems

Nissly, A., Reutzel, E. W. & Palmer, T., 2012, ICALEO 2012 - 31st International Congress on Applications of Lasers and Electro-Optics. p. 502-508 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Repair
Lasers
Optics
Robotics
Processing
1 Citation (Scopus)

Compliant articulation structure using superelastic nitinol

Liu, J., Hall, B., Frecker, M. I. & Reutzel, E. W., Dec 1 2012, ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012. Vol. 2. p. 523-533 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Endoscopy
Cooling water
Fiber lasers
Laser modes

Laser-doped selective emitters for photovoltaic applications

Woolridge, J., Reutzel, E. W., Ashok, S. & Zou, L., Jan 1 2012, 16th International Workshop on Physics of Semiconductor Devices. SPIE, Vol. 8549. 85493H

Research output: Chapter in Book/Report/Conference proceedingConference contribution

emitters
Doping (additives)
Laser
Lasers
lasers
1 Citation (Scopus)

Modeling of contact geometry and dopant profile during laser - Silicon interaction

Raghavan, A., Blecher, J. J., Palmer, T., Reutzel, E. W. & Debroy, T., Dec 1 2012, Laser Material Processing for Solar Energy. Vol. 8473. 847304

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact Geometry
Silicon
Doping (additives)
Laser
Geometry

Parameter optimization of laser-doped selective emitters for applications in silicon solar cells

Heinrichs, H., Reutzel, E. W., Ashok, S. & Mohney, S. E., Dec 1 2012, Laser Material Processing for Solar Energy. Vol. 8473. 84730W

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon solar cells
Parameter Optimization
Solar Cells
Q switched lasers
Silicon
2010

Beam delivery techniques for laser fired contacts

Hua, Z., Reutzel, E. W. & Zou, L., 2010, 29th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2010 - Congress Proceedings. Vol. 103. p. 1092-1098 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

delivery
Lasers
lasers
silicon
Diffractive optical elements
2007

Experience with shipyard installation of a hybrid pipe welding system

Reutzel, E. W., Kern, L. A., Tressler, J. F. & Sullivan, M. J., Dec 1 2007, 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings. (26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shipyards
Welding
Pipe
Automobile manufacture
Gas lasers
2006
3 Citations (Scopus)

Continued experimental analysis of practical aspects of hybrid welding of thick sections

Reutzel, E. W., Kern, L. A. & Tressler, J. F., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 1906

Research output: Chapter in Book/Report/Conference proceedingConference contribution

welding
Welding
Welds
Automobile manufacture
Gas lasers

Experimental analysis of laser stripping effects on thin composites

Reutzel, E. W., Knock, K., Wool, M. R. & Meinert, Jr., K. C., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 1603

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
laser
Lasers
Composite materials
Hazardous Waste
2005

Examination of the process efficiency during hybrid laser-arc welding

Kelly, S. M., Reutzel, E. W., Whitney, E. J., Tressler, J. F. & Martukanitz, R., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. Vol. 3. p. 69-76 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser beam welding
Electric arc welding
Laser beams
Automobile manufacture
Gas metal arc welding

Experimental analysis of practical aspects of hybrid welding of thick sections

Reutzel, E. W., Kelly, S. M., Tressler, J. F. & Martukanitz, R., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 143-152 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Welds
Gas lasers
Shipbuilding
Laser beam welding

Laser-gma hybrid welding: Distortion analysis and design optimization modelling techniques

Bugarewicz, M. M., Kelly, S. M., Michaleris, P., Reutzel, E. W. & Martukanitz, R., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 535-542 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas lasers
Welding
Lasers
Welds
Shipbuilding
6 Citations (Scopus)

Laser-GMA hybrid welding: Process monitoring and thermal modeling

Reutzel, E. W., Kelly, S. M., Martukanitz, R., Bugarewicz, M. M. & Michaleris, P., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 143-148 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas lasers
Process monitoring
Gas metal arc welding
Welding
Welds
2004

Investigation of laser-induced material removal of stainless steel at the super-micron level

Kern, L. A., Reutzel, E. W. & Sills, C. A., 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Stainless steel
laser
steel
Lasers
2 Citations (Scopus)

Laser paint stripping process emissions: Q-switched vs. pulsed Nd:YAG laser

Reutzel, E. W., Keay, J. M. & Sills, C. A., 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
laser
Lasers
coating
refurbishment
7 Citations (Scopus)

Sensing for monitoring of the laser-GMAW hybrid welding process

Travis, D., Dearden, G., Watkins, K. G., Reutzel, E. W., Martukanitz, R. & Tressler, J. F., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas metal arc welding
welding
Welding
laser
Lasers
2003
1 Citation (Scopus)

Path planning strategies for laser line forming

Reutzel, E. W., Gombotz, K., Martukanitz, R. & Michaleris, P., Dec 1 2003, ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. 106

Research output: Chapter in Book/Report/Conference proceedingConference contribution

inverse problem
Motion planning
Inverse problems
laser
heating
2002
3 Citations (Scopus)

Adaptive backstepping control of a McKibben actuator driving an inertial load

Reutzel, E. W. & Rahn, C. D., 2002, Dynamic Systems and Control. American Society of Mechanical Engineers (ASME), p. 381-386 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Backstepping
Actuators
Muscle
Pneumatic actuators
Linear actuators
1 Citation (Scopus)

Continuing development of a laser line forming system

Reutzel, E. W., Aburdene, J. U., Gombotz, K. J., Magnusen, J. P., Martukanitz, R., Michaleris, P. & Zhang, L., Dec 1 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser
Lasers
Laser radiation
Motion planning
Robotics