If you made any changes in Pure, your changes will be visible here soon.

Research Output 1986 2013

2013
27 Citations (Scopus)

Experimental investigation of high strain-rate behaviour of fabric composites

Foroutan, R., Nemes, J., Ghiasi, H. & Hubert, P., Dec 1 2013, In : Composite Structures. 106, p. 264-269 6 p.

Research output: Contribution to journalArticle

Strain rate
Composite materials
Carbon
Elastic moduli
Fibers
1 Citation (Scopus)

Systematic characterization of the crashworthiness properties of low alloys silicon bearing trip steels

Dabboussi, W. & Nemes, J. A., Oct 9 2013, In : ISIJ International. 53, 8, p. 1462-1470 9 p.

Research output: Contribution to journalArticle

Bearings (structural)
Crashworthiness
Silicon alloys
Steel
Austenite
2012
5 Citations (Scopus)
Cold heading
Shear Bands
Shear bands
Finite Element Simulation
Simulation Study
2011
2 Citations (Scopus)

SE CAPSTONE: Introduction of systems engineering into an undergraduate multidisciplinary capstone course

Nemes, J., Hochstedt, K. S., Brannon, M. L., Kisenwether, E. C., Capuro, R. M. & Biln, S. G., 2011, In : ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Contribution to journalArticle

Systems engineering
2010
17 Citations (Scopus)

A comparative analysis of a modified picture frame test for characterization of woven fabrics

Milani, A. S., Nemes, J., Lebrun, G. & Bureau, M. N., Jan 1 2010, In : Polymer Composites. 31, 4, p. 561-568 8 p.

Research output: Contribution to journalArticle

Fibers
Constitutive models
Finite element method
Glass

Springback in sheet metal forming of stainless steel 410

Ragai, I. & Nemes, J. A., Dec 1 2010, ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010. p. 15-22 8 p. (ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal forming
Sheet metal
Stainless steel
Cones
Aircraft engines
2009
61 Citations (Scopus)

An improved multi-objective identification of Johnson-Cook material parameters

Milani, A. S., Dabboussi, W., Nemes, J. & Abeyaratne, R. C., Feb 1 2009, In : International Journal of Impact Engineering. 36, 2, p. 294-302 9 p.

Research output: Contribution to journalArticle

Strain rate
Experiments
Sensitivity analysis
Hardening
Identification (control systems)

Effect of grain size and martensite fraction on the dynamic factor of dual phase steel microstructures

Qu, J., Dabboussi, W., Nemes, J. & Yue, S., Jul 2009, In : Canadian Metallurgical Quarterly. 48, 3, p. 247-252 6 p.

Research output: Contribution to journalArticle

Steel
Martensite
Microstructure
Ferrite
Steel sheet

High strain rate characterization of woven carbon/epoxy composites

Foroutan, R. & Nemes, J. A., Dec 1 2009, 24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites. p. 2043-2058 16 p. (24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain rate
Carbon
Bone
Composite materials
Strain gages
2 Citations (Scopus)
Honeycomb
Process Optimization
Numerical models
Stiffness
Sandwich Structures
17 Citations (Scopus)

Internal ductile failure mechanisms in steel cold heading process

Sabih, A. & Nemes, J., May 1 2009, In : Journal of Materials Processing Technology. 209, 9, p. 4292-4311 20 p.

Research output: Contribution to journalArticle

Cold heading
Steel
Nucleation
Shear bands
Coalescence
2008
3 Citations (Scopus)

Effect of microstructure and chemical composition on dynamic factor of high strength steels

Qu, J., Dabboussi, W., Nemes, J. & Yue, S., Oct 1 2008, In : Materials Science and Technology. 24, 8, p. 957-963 7 p.

Research output: Contribution to journalArticle

high strength steels
High strength steel
Ferrite
ferrites
chemical composition
22 Citations (Scopus)

Effect of microstructure on the dynamic deformation behavior of dual phase steel

Qu, J., Dabboussi, W., Hassani, F., Nemes, J. & Yue, S., Apr 25 2008, In : Materials Science and Engineering A. 479, 1-2, p. 93-104 12 p.

Research output: Contribution to journalArticle

Steel
ferrites
Ferrite
steels
microstructure
19 Citations (Scopus)

Investigation of the mechanical behaviour of multi-phase TRIP steels using finite element methods

Sierra, R. & Nemes, J., Apr 1 2008, In : International Journal of Mechanical Sciences. 50, 4, p. 649-665 17 p.

Research output: Contribution to journalArticle

Steel
plastic properties
Plasticity
phase transformations
finite element method
12 Citations (Scopus)

Predicting the ductile failure of DP-steels using micromechanical modeling of cells

Al-Abbasi, F. M. & Nemes, J. A., Sep 5 2008, In : International Journal of Damage Mechanics. 17, 5, p. 447-472 26 p.

Research output: Contribution to journalArticle

Steel
Volume fraction
Automotive industry
Martensite
Mechanics
2007
27 Citations (Scopus)

A method for the approximation of non-uniform fiber misalignment in textile composites using picture frame test

Milani, A. S., Nemes, J., Abeyaratne, R. C. & Holzapfel, G. A., Jun 1 2007, In : Composites Part A: Applied Science and Manufacturing. 38, 6, p. 1493-1501 9 p.

Research output: Contribution to journalArticle

Textiles
Constitutive models
Fibers
Composite materials
2 Citations (Scopus)

A survey of biomechanical modeling of the brain for intra-surgical displacement estimation and medical simulation

Audette, M. A., Miga, M., Nemes, J., Chinzei, K. & Peters, T. M., Jan 1 2007, Biomechanical Systems Technology: General Anatomy. World Scientific Publishing Co., p. 83-112 30 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Brain
Theaters
Biomechanics
Craniocerebral Trauma
Biomechanical Phenomena
54 Citations (Scopus)

Characterizing DP-steels using micromechanical modeling of cells

Al-Abbasi, F. M. & Nemes, J., Apr 1 2007, In : Computational Materials Science. 39, 2, p. 402-415 14 p.

Research output: Contribution to journalArticle

Steel
martensite
Martensite
steels
Cell

Crystal plasticity modeling of the slip systems activity in Mg alloys at higher temperatures

Shahi, M. & Nemes, J., Dec 1 2007.

Research output: Contribution to conferencePaper

Plasticity
Crystals
Strain rate
Temperature
Stress-strain curves

Experimental characterization of the strain rate and stress state effects on a TRIP assisted multiphase steel

Dabboussi, W., Qu, J., Nemes, J. & Yue, S., Dec 1 2007.

Research output: Contribution to conferencePaper

Plasticity
Strain rate
Steel
Martensitic transformations
Austenite
1 Citation (Scopus)

Experimental characterization of the strain rate and stress state effects on a TRIP assisted multiphase steel

Dabboussi, W., Qu, J., Nemes, J. & Yue, S., Jan 1 2007, In : SAE Technical Papers.

Research output: Contribution to journalConference article

Plasticity
Strain rate
Steel
Martensitic transformations
Austenite
2006
4 Citations (Scopus)

A workability criterion for internal ductile fracture in the steel cold heading process

Sabih, A., Nemes, J. A., Nickoletopoulos, N. & Hone, M., Mar 1 2006, Wire Journal International, 39, 3, p. 155-159 5 p.

Research output: Contribution to specialist publicationArticle

Cold heading
Ductile fracture
Steel
Compressive stress
Crack initiation
3 Citations (Scopus)

A workability criterion for the transformed adiabatic shear band phenomena during cold heading of 1038 steel

Sabih, A., Elwazri, A. M., Nemes, J. & Yue, S., Dec 27 2006, In : Journal of Failure Analysis and Prevention. 6, 4, p. 97-105 9 p.

Research output: Contribution to journalArticle

Cold heading
Shear bands
Steel
Defects
Temperature
1 Citation (Scopus)

High strain rate deformation behavior of advanced high strength steels for automotive applications

Qu, J., Dabboussi, W., Nemes, J., Yue, S. & Hassani, F., Dec 1 2006.

Research output: Contribution to conferencePaper

High strength steel
Strain rate
Microstructure
Bainite
Martensite
1 Citation (Scopus)

On obtaining material parameters for general purpose finite element models

Milani, A. S., Dabboussi, W., El-Lahham, C., Nemes, J. & Abeyaratne, R. C., Nov 27 2006, Proceedings of the 17th IASTED International Conference on Modelling and Simulation. p. 573-578 6 p. (Proceedings of the IASTED International Conference on Modelling and Simulation; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite Element Model
Constitutive Relations
Strain Rate
Strain rate
Constitutive Law
29 Citations (Scopus)

Study of parameters affecting the strength of yarns

Farsi Dooraki, B., Nemes, J. A. & Bolduc, M., Aug 1 2006, Proceedings - 8th International Conference on Mechanical and Physical Behaviour of Materials under Dyanmic Loading, EURODYMAT 2006. p. 1183-1188 6 p. (Journal De Physique. IV : JP; vol. 134).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

yarns
Kevlar (trademark)
fibers
hydraulics
tensile strength
2005
13 Citations (Scopus)
Single crystals
single crystals
heat resistant alloys
slip
asymmetry
51 Citations (Scopus)

Anisotropy and springback in draw-bending of stainless steel 410: Experimental and numerical study

Ragai, I., Lazim, D. & Nemes, J. A., Jul 15 2005, In : Journal of Materials Processing Technology. 166, 1, p. 116-127 12 p.

Research output: Contribution to journalArticle

Stainless Steel
Lubrication
Anisotropy
Stainless steel
Friction
1 Citation (Scopus)

A workability criterion for internal ductile fracture in the steel cold heading process

Sabih, A., Nemes, J. A., Nickoletopoulos, N. & Hone, M., May 1 2005, p. 214-221. 8 p.

Research output: Contribution to conferencePaper

Cold heading
Ductile fracture
Steel
Shear bands
Cracks

A workability criterion for the transformed adiabatic shear band phenomena during cold heading of 1038 steel

Sabih, A., Elwazri, A. M., Nemes, J. A. & Yue, S., Dec 1 2005, Materials Science and Technology 2005 - Proceedings of the Conference. p. 139-150 12 p. (Materials Science and Technology; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cold heading
Shear bands
Steel
Defects
Phase transitions
15 Citations (Scopus)

Characterization of internal voids and cracks in cold heading of dual phase steel

Sabih, A., Wanjara, P. & Nemes, J., Oct 31 2005, In : ISIJ International. 45, 8, p. 1179-1186 8 p.

Research output: Contribution to journalArticle

Cold heading
Shear bands
Steel
Cracks
Microcracks
29 Citations (Scopus)

Effect of microstructure on static and dynamic mechanical property of a dual phase steel studied by shear punch testing

Qu, J., Dabboussi, W., Hassani, F., Nemes, J. & Yue, S., Dec 1 2005, In : ISIJ International. 45, 11, p. 1741-1746 6 p.

Research output: Contribution to journalArticle

Steel
Martensite
Mechanical properties
Microstructure
Testing
1 Citation (Scopus)

Experimental investigation of springback of dual-phase steels

Ragai, I. & Nemes, J., Dec 1 2005.

Research output: Contribution to conferencePaper

Steel
Anisotropy
Experiments
Steel sheet
Automotive industry
73 Citations (Scopus)

Modeling of ductile fracture using the dynamic punch test

Dabboussi, W. & Nemes, J., Aug 1 2005, In : International Journal of Mechanical Sciences. 47, 8, p. 1282-1299 18 p.

Research output: Contribution to journalArticle

punches
Ductile fracture
Titanium
Constitutive models
Aluminum

On the use of the shear punch experiments in determining mechanical properties of various dual phase steels

Dabboussi, W., Qu, J., Nemes, J. & Yue, S., Dec 1 2005.

Research output: Contribution to conferencePaper

Mechanical properties
Steel
Experiments
Crashworthiness
Formability
1 Citation (Scopus)

Optimization of cold heading preform dies using FEM analysis and a multi-criteria Taguchi approach

El-Lahham, C., Milani, A. S., Nemes, J., Nickoletopoulos, N. & Hone, M., May 2005, Wire Journal International, 38, 5, p. 66-70 5 p.

Research output: Contribution to specialist publicationArticle

Cold heading
Bolts
Finite element method
Defects
Taguchi methods
137 Citations (Scopus)

The effect of normalization norms in multiple attribute decision making models: A case study in gear material selection

Milani, A. S., Shanian, A., Madoliat, R. & Nemes, J. A., Apr 1 2005, In : Structural and Multidisciplinary Optimization. 29, 4, p. 312-318 7 p.

Research output: Contribution to journalArticle

Multiple Attribute Decision Making
Normalization
Gears
Decision making
Norm
2004
32 Citations (Scopus)
Constitutive models
Thermoplastics
Textiles
Composite materials
Fibers
6 Citations (Scopus)

Different approaches in multiple-criteria optimization using the taguchi method: A case study in a cold heading process

Milani, A. S., El-Lahham, C. & Nemes, J., Jun 1 2004, In : Journal of Advanced Manufacturing Systems. 3, 1, p. 53-68 16 p.

Research output: Contribution to journalArticle

Cold heading
Taguchi methods
Decision making
Taguchi method
Multiple criteria optimization
12 Citations (Scopus)

Effect of microstructure on the cold headability of a medium carbon steel

Ma, X., Humphreys, A. O., Nemes, J., Hone, M., Nickoletopoulos, N. & Jonas, J. J., Jan 1 2004, In : ISIJ International. 44, 5, p. 905-913 9 p.

Research output: Contribution to journalArticle

Carbon steel
Microstructure
Towers
Cracks
Testing
1 Citation (Scopus)

High speed deformation behavior of a dual phase steel

Qu, J., Dabboussi, W., Nemes, J. & Yue, S., Dec 1 2004, In : Materials Science and Technology. 1, p. 153-161 9 p.

Research output: Contribution to journalConference article

Microstructure
Steel
Martensite
Ferrite
Heat treatment
2 Citations (Scopus)
textiles
Identification (control systems)
Textiles
composite materials
Composite materials
2003
70 Citations (Scopus)

Biomechanical Explanation of Adjacent Fractures Following Vertebroplasty [3] (multiple letters)

Baroud, G., Heini, P., Nemes, J., Bohner, M., Ferguson, S., Steffen, T., Hirsch, J. A., Alkaley, R., Uppin, A. A., Pazianos, A., Choi, I. S. & Pfeifer, B. A., Nov 1 2003, In : Radiology. 229, 2, p. 606-608 3 p.

Research output: Contribution to journalLetter

Spinal Fractures
Vertebroplasty
Bone Cements
Spontaneous Fractures
Polymethyl Methacrylate
1 Citation (Scopus)

Experimental and finite element modeling for prediction of optimum phase combinations in dual phase steels

Al-Abbasi, F. M. & Nemes, J., Jul 18 2003, In : Materials Science Forum. 426-432, 2, p. 1559-1564 6 p.

Research output: Contribution to journalConference article

Steel
martensite
Martensite
steels
Ferrite

Formability criteria for cold heading applications

El-Lahham, C., Nemes, J., Nickoletopoulos, N. & Hone, M., Jul 18 2003, In : Materials Science Forum. 426-432, 5, p. 4447-4454 8 p.

Research output: Contribution to journalConference article

Cold heading
Formability
Cracks
Ductile fracture
Shear bands

Investigation of Structural and Material Effects on Crashworthiness of Advanced High Strength Steel Columns

Ben-Yahia, F., Nemes, J. & Hassani, F., Jan 1 2003, Transportation 2003: Making Tracks for Tomorrows Transportation. American Society of Mechanical Engineers (ASME), p. 27-36 10 p. (Transportation: Making Tracks for Tomorrow's Transportation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crashworthiness
High strength steel
Spot welding
Steel
Experiments
217 Citations (Scopus)

Load shift of the intervertebral disc after a vertebroplasty: A finite-element study

Baroud, G., Nemes, J., Heini, P. & Steffen, T., Aug 1 2003, In : European Spine Journal. 12, 4, p. 421-426 6 p.

Research output: Contribution to journalArticle

Vertebroplasty
Intervertebral Disc
Spine
Bone Cements
Osteoporotic Fractures
34 Citations (Scopus)
Bone cement
Polymethyl Methacrylate
Infiltration
Acrylics
Bone
125 Citations (Scopus)

Micromechanical modeling of dual phase steels

Al-Abbasi, F. M. & Nemes, J. A., Sep 1 2003, In : International Journal of Mechanical Sciences. 45, 9, p. 1449-1465 17 p.

Research output: Contribution to journalArticle

Steel
steels
Volume fraction
work hardening
Stress-strain curves