If you made any changes in Pure, your changes will be visible here soon.

Research Output 1986 2013

Filter
Article
2013
27 Citations (Scopus)

Experimental investigation of high strain-rate behaviour of fabric composites

Foroutan, R., Nemes, J., Ghiasi, H. & Hubert, P., Dec 1 2013, In : Composite Structures. 106, p. 264-269 6 p.

Research output: Contribution to journalArticle

Strain rate
Composite materials
Carbon
Elastic moduli
Fibers
1 Citation (Scopus)

Systematic characterization of the crashworthiness properties of low alloys silicon bearing trip steels

Dabboussi, W. & Nemes, J. A., Oct 9 2013, In : ISIJ International. 53, 8, p. 1462-1470 9 p.

Research output: Contribution to journalArticle

Bearings (structural)
Crashworthiness
Silicon alloys
Steel
Austenite
2012
5 Citations (Scopus)
Cold heading
Shear Bands
Shear bands
Finite Element Simulation
Simulation Study
2011
2 Citations (Scopus)

SE CAPSTONE: Introduction of systems engineering into an undergraduate multidisciplinary capstone course

Nemes, J., Hochstedt, K. S., Brannon, M. L., Kisenwether, E. C., Capuro, R. M. & Biln, S. G., 2011, In : ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Contribution to journalArticle

Systems engineering
2010
17 Citations (Scopus)

A comparative analysis of a modified picture frame test for characterization of woven fabrics

Milani, A. S., Nemes, J., Lebrun, G. & Bureau, M. N., Jan 1 2010, In : Polymer Composites. 31, 4, p. 561-568 8 p.

Research output: Contribution to journalArticle

Fibers
Constitutive models
Finite element method
Glass
2009
61 Citations (Scopus)

An improved multi-objective identification of Johnson-Cook material parameters

Milani, A. S., Dabboussi, W., Nemes, J. & Abeyaratne, R. C., Feb 1 2009, In : International Journal of Impact Engineering. 36, 2, p. 294-302 9 p.

Research output: Contribution to journalArticle

Strain rate
Experiments
Sensitivity analysis
Hardening
Identification (control systems)

Effect of grain size and martensite fraction on the dynamic factor of dual phase steel microstructures

Qu, J., Dabboussi, W., Nemes, J. & Yue, S., Jul 2009, In : Canadian Metallurgical Quarterly. 48, 3, p. 247-252 6 p.

Research output: Contribution to journalArticle

Steel
Martensite
Microstructure
Ferrite
Steel sheet
2 Citations (Scopus)
Honeycomb
Process Optimization
Numerical models
Stiffness
Sandwich Structures
17 Citations (Scopus)

Internal ductile failure mechanisms in steel cold heading process

Sabih, A. & Nemes, J., May 1 2009, In : Journal of Materials Processing Technology. 209, 9, p. 4292-4311 20 p.

Research output: Contribution to journalArticle

Cold heading
Steel
Nucleation
Shear bands
Coalescence
2008
3 Citations (Scopus)

Effect of microstructure and chemical composition on dynamic factor of high strength steels

Qu, J., Dabboussi, W., Nemes, J. & Yue, S., Oct 1 2008, In : Materials Science and Technology. 24, 8, p. 957-963 7 p.

Research output: Contribution to journalArticle

high strength steels
High strength steel
Ferrite
ferrites
chemical composition
22 Citations (Scopus)

Effect of microstructure on the dynamic deformation behavior of dual phase steel

Qu, J., Dabboussi, W., Hassani, F., Nemes, J. & Yue, S., Apr 25 2008, In : Materials Science and Engineering A. 479, 1-2, p. 93-104 12 p.

Research output: Contribution to journalArticle

Steel
ferrites
Ferrite
steels
microstructure
19 Citations (Scopus)

Investigation of the mechanical behaviour of multi-phase TRIP steels using finite element methods

Sierra, R. & Nemes, J., Apr 1 2008, In : International Journal of Mechanical Sciences. 50, 4, p. 649-665 17 p.

Research output: Contribution to journalArticle

Steel
plastic properties
Plasticity
phase transformations
finite element method
12 Citations (Scopus)

Predicting the ductile failure of DP-steels using micromechanical modeling of cells

Al-Abbasi, F. M. & Nemes, J. A., Sep 5 2008, In : International Journal of Damage Mechanics. 17, 5, p. 447-472 26 p.

Research output: Contribution to journalArticle

Steel
Volume fraction
Automotive industry
Martensite
Mechanics
2007
27 Citations (Scopus)

A method for the approximation of non-uniform fiber misalignment in textile composites using picture frame test

Milani, A. S., Nemes, J., Abeyaratne, R. C. & Holzapfel, G. A., Jun 1 2007, In : Composites Part A: Applied Science and Manufacturing. 38, 6, p. 1493-1501 9 p.

Research output: Contribution to journalArticle

Textiles
Constitutive models
Fibers
Composite materials
54 Citations (Scopus)

Characterizing DP-steels using micromechanical modeling of cells

Al-Abbasi, F. M. & Nemes, J., Apr 1 2007, In : Computational Materials Science. 39, 2, p. 402-415 14 p.

Research output: Contribution to journalArticle

Steel
martensite
Martensite
steels
Cell
2006
4 Citations (Scopus)

A workability criterion for internal ductile fracture in the steel cold heading process

Sabih, A., Nemes, J. A., Nickoletopoulos, N. & Hone, M., Mar 1 2006, Wire Journal International, 39, 3, p. 155-159 5 p.

Research output: Contribution to specialist publicationArticle

Cold heading
Ductile fracture
Steel
Compressive stress
Crack initiation
3 Citations (Scopus)

A workability criterion for the transformed adiabatic shear band phenomena during cold heading of 1038 steel

Sabih, A., Elwazri, A. M., Nemes, J. & Yue, S., Dec 27 2006, In : Journal of Failure Analysis and Prevention. 6, 4, p. 97-105 9 p.

Research output: Contribution to journalArticle

Cold heading
Shear bands
Steel
Defects
Temperature
2005
13 Citations (Scopus)
Single crystals
single crystals
heat resistant alloys
slip
asymmetry
51 Citations (Scopus)

Anisotropy and springback in draw-bending of stainless steel 410: Experimental and numerical study

Ragai, I., Lazim, D. & Nemes, J. A., Jul 15 2005, In : Journal of Materials Processing Technology. 166, 1, p. 116-127 12 p.

Research output: Contribution to journalArticle

Stainless Steel
Lubrication
Anisotropy
Stainless steel
Friction
15 Citations (Scopus)

Characterization of internal voids and cracks in cold heading of dual phase steel

Sabih, A., Wanjara, P. & Nemes, J., Oct 31 2005, In : ISIJ International. 45, 8, p. 1179-1186 8 p.

Research output: Contribution to journalArticle

Cold heading
Shear bands
Steel
Cracks
Microcracks
29 Citations (Scopus)

Effect of microstructure on static and dynamic mechanical property of a dual phase steel studied by shear punch testing

Qu, J., Dabboussi, W., Hassani, F., Nemes, J. & Yue, S., Dec 1 2005, In : ISIJ International. 45, 11, p. 1741-1746 6 p.

Research output: Contribution to journalArticle

Steel
Martensite
Mechanical properties
Microstructure
Testing
73 Citations (Scopus)

Modeling of ductile fracture using the dynamic punch test

Dabboussi, W. & Nemes, J., Aug 1 2005, In : International Journal of Mechanical Sciences. 47, 8, p. 1282-1299 18 p.

Research output: Contribution to journalArticle

punches
Ductile fracture
Titanium
Constitutive models
Aluminum
1 Citation (Scopus)

Optimization of cold heading preform dies using FEM analysis and a multi-criteria Taguchi approach

El-Lahham, C., Milani, A. S., Nemes, J., Nickoletopoulos, N. & Hone, M., May 2005, Wire Journal International, 38, 5, p. 66-70 5 p.

Research output: Contribution to specialist publicationArticle

Cold heading
Bolts
Finite element method
Defects
Taguchi methods
137 Citations (Scopus)

The effect of normalization norms in multiple attribute decision making models: A case study in gear material selection

Milani, A. S., Shanian, A., Madoliat, R. & Nemes, J. A., Apr 1 2005, In : Structural and Multidisciplinary Optimization. 29, 4, p. 312-318 7 p.

Research output: Contribution to journalArticle

Multiple Attribute Decision Making
Normalization
Gears
Decision making
Norm
2004
32 Citations (Scopus)
Constitutive models
Thermoplastics
Textiles
Composite materials
Fibers
6 Citations (Scopus)

Different approaches in multiple-criteria optimization using the taguchi method: A case study in a cold heading process

Milani, A. S., El-Lahham, C. & Nemes, J., Jun 1 2004, In : Journal of Advanced Manufacturing Systems. 3, 1, p. 53-68 16 p.

Research output: Contribution to journalArticle

Cold heading
Taguchi methods
Decision making
Taguchi method
Multiple criteria optimization
12 Citations (Scopus)

Effect of microstructure on the cold headability of a medium carbon steel

Ma, X., Humphreys, A. O., Nemes, J., Hone, M., Nickoletopoulos, N. & Jonas, J. J., Jan 1 2004, In : ISIJ International. 44, 5, p. 905-913 9 p.

Research output: Contribution to journalArticle

Carbon steel
Microstructure
Towers
Cracks
Testing
2 Citations (Scopus)
textiles
Identification (control systems)
Textiles
composite materials
Composite materials
2003
217 Citations (Scopus)

Load shift of the intervertebral disc after a vertebroplasty: A finite-element study

Baroud, G., Nemes, J., Heini, P. & Steffen, T., Aug 1 2003, In : European Spine Journal. 12, 4, p. 421-426 6 p.

Research output: Contribution to journalArticle

Vertebroplasty
Intervertebral Disc
Spine
Bone Cements
Osteoporotic Fractures
34 Citations (Scopus)
Bone cement
Polymethyl Methacrylate
Infiltration
Acrylics
Bone
125 Citations (Scopus)

Micromechanical modeling of dual phase steels

Al-Abbasi, F. M. & Nemes, J. A., Sep 1 2003, In : International Journal of Mechanical Sciences. 45, 9, p. 1449-1465 17 p.

Research output: Contribution to journalArticle

Steel
steels
Volume fraction
work hardening
Stress-strain curves
49 Citations (Scopus)

Micromechanical modeling of the effect of particle size difference in dual phase steels

Al-Abbasi, F. M. & Nemes, J. A., Jan 1 2003, In : International Journal of Solids and Structures. 40, 13-14, p. 3379-3391 13 p.

Research output: Contribution to journalArticle

Steel
Martensite
Particle Size
Particle size
steels
2001
8 Citations (Scopus)

Cutting load capacity of end mills with complex geometry

Nemes, J. A., Asamoah-Attiah, S., Budak, E. & Kops, L., Jan 1 2001, In : CIRP Annals - Manufacturing Technology. 50, 1, p. 65-68 4 p.

Research output: Contribution to journalArticle

Carbides
Geometry
Stress concentration
Tensile strength
Finite element method
5 Citations (Scopus)

Development of a fracture criterion for cold heading

Nickoletopoulos, N., Hone, M., Wanjara, P., Verreman, Y., Nemes, J. A., Jonas, J. J. & Yue, S., Sep 1 2001, In : Wire Journal International. 34, 9, p. 90-98 9 p.

Research output: Contribution to journalArticle

Cold heading
Ductile fracture
Lubrication
Surface properties
Strain rate
3 Citations (Scopus)

Dual-phase steels for cold-heading applications

Wanjara, P., Hone, M., Nickoletopoulos, N., Tendler, A., Yue, S. & Nemes, J., Sep 2001, In : Wire Journal International. 34, 9, p. 104-107 4 p.

Research output: Contribution to journalArticle

Cold heading
Steel
Formability
Compression testing
Testing
36 Citations (Scopus)

Membrane inflation of polymeric materials: Experiments and finite element simulations

Li, Y., Nemes, J. & Derdouri, A. A., Aug 1 2001, In : Polymer Engineering and Science. 41, 8, p. 1399-1412 14 p.

Research output: Contribution to journalArticle

Thermal gradients
Membranes
Polymers
Experiments
Finite element method
2000
2 Citations (Scopus)

Determination of residual stresses in a steel fastener by neutron diffraction

Nickoletopoulos, N., Hone, M., Rogge, R. B. & Nemes, J. A., Apr 1 2000, In : Wire Journal International. 33, 4, p. 220-226 7 p.

Research output: Contribution to journalArticle

Fasteners
Steel
Neutron diffraction
Residual stresses
30 Citations (Scopus)

Dynamic testing of composite laminates with a tensile split Hopkinson bar

Eskandari, H. & Nemes, J. A., Jan 1 2000, In : Journal of Composite Materials. 34, 4, p. 260-273 14 p.

Research output: Contribution to journalArticle

Laminates
Graphite
Composite materials
Testing
Laminated composites
12 Citations (Scopus)

Optical 3-D dynamic measurement system and its application to polymer membrane inflation tests

Li, Y., Nemes, J. & Derdouri, A., Jan 1 2000, In : Optics and Lasers in Engineering. 33, 4, p. 261-276 16 p.

Research output: Contribution to journalArticle

Polymers
membranes
Membranes
polymers
gratings
16 Citations (Scopus)

Time domain finite element simulations of damped multilayered beams using a prony series representation

Slanik, M. L., Nemes, J., Potvin, M. J. & Piedboeuf, J. C., Dec 1 2000, In : Mechanics Time-Dependent Materials. 4, 3, p. 211-230 20 p.

Research output: Contribution to journalArticle

Steel
ABAQUS
Dynamic response
Time series
Natural frequencies
1999
4 Citations (Scopus)

Influence of strain distribution on microstructure evolution during rod-rolling

Chin, B., Nemes, J. A. & Yue, S., Jan 1 1999, In : International Journal of Mechanical Sciences. 41, 9, p. 1111-1131 21 p.

Research output: Contribution to journalArticle

strain distribution
rods
billets
microstructure
Microstructure
1 Citation (Scopus)

Isotropic damage model based on a tensorial representation of damage

Eskandari, H. & Nemes, J. A., Jul 1 1999, In : International Journal of Damage Mechanics. 8, 3, p. 254-271 18 p.

Research output: Contribution to journalArticle

Tensors
Graphite epoxy composites
Laminated composites
Poisson ratio
Strain energy
1998
3 Citations (Scopus)

Comparison of viscoelastic models in simulating the transient response of a slewing polymer arm

Potvin, M. J., Piedboeuf, J. C. & Nemes, J., Jan 1 1998, In : Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 120, 3, p. 340-345 6 p.

Research output: Contribution to journalArticle

slewing
transient response
Transient analysis
Derivatives
polymers
26 Citations (Scopus)

Effect of laminate parameters on penetration of graphite/epoxy composites

Nemes, J., Eskandari, H. & Rakitch, L., Jan 1 1998, In : International Journal of Impact Engineering. 21, 1-2, p. 97-112 16 p.

Research output: Contribution to journalArticle

Graphite epoxy composites
Laminates
Graphite
Experiments
Hydraulics
50 Citations (Scopus)

Thermal expansion of isotropic Duralcan metal-matrix composites

Lemieux, S., Elomari, S., Nemes, J. & Skibo, M. D., Jan 1 1998, In : Journal of Materials Science. 33, 17, p. 4381-4387 7 p.

Research output: Contribution to journalArticle

Thermal expansion
Metals
Reinforcement
Composite materials
Volume fraction
1997
13 Citations (Scopus)

A closed-form solution for stresses at curved free edges in composite laminates: A variational approach

Zhang, C., Lessard, L. B. & Nemes, J., Dec 1 1997, In : Composites Science and Technology. 57, 9-10, p. 1341-1354 14 p.

Research output: Contribution to journalArticle

Laminates
Composite materials
Stress concentration
Boundary layers
Boundary conditions
1 Citation (Scopus)

The effect of film edge shapes on the stress field for a multilayered semiconductor structure: A finite-element analysis study

Díaz Valdés, S. H., Nemes, J. A. & Jiran, E., Jul 1 1997, In : Journal of Crystal Growth. 178, 3, p. 268-275 8 p.

Research output: Contribution to journalArticle

shear stress
stress distribution
Stress concentration
Shear stress
Semiconductor materials
1996
10 Citations (Scopus)

Dynamic punch shear behavior of AS4/3501-6

Riendeau, S. & Nemes, J. A., Jan 1 1996, In : Journal of Composite Materials. 30, 13, p. 1494-1512 19 p.

Research output: Contribution to journalArticle

Delamination
Graphite fibers
Punching
Graphite
Fibers
5 Citations (Scopus)

On the propagation of elastic-viscoplastic waves in damage-softened polycrystalline materials

Eftis, J. & Nemes, J. A., Dec 1 1996, In : International journal of plasticity. 12, 8, p. 1005-1022 18 p.

Research output: Contribution to journalArticle

Polycrystalline materials
Elastic waves
Partial differential equations
Wave propagation
Equations of motion