Richard Martukanitz

    • 707 Citations
    • 14 h-Index
    1982 …2019
    If you made any changes in Pure, your changes will be visible here soon.

    Research Output 1982 2019

    2019
    3D printers
    Powders
    Feedstocks
    Fusion reactions
    2018
    2 Citations (Scopus)

    Design and evaluation of an additively manufactured aircraft heat exchanger

    Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jun 25 2018, In : Applied Thermal Engineering. 138, p. 254-263 10 p.

    Research output: Contribution to journalArticle

    3D printers
    Heat exchangers
    Aircraft
    Geometry
    Heat transfer
    6 Citations (Scopus)
    Inconel (trademark)
    solidification
    Solidification
    thermal analysis
    Deposits
    2017

    Experimental comparison of a traditionally built versus additively manufactured aircraft heat exchanger

    Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jan 1 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0902

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Heat exchangers
    Aircraft
    Pressure drop
    Geometry
    Heat transfer
    4 Citations (Scopus)

    Partitioning of laser energy during directed energy deposition

    Lia, F., Park, J., Tressler, J. & Martukanitz, R., Dec 1 2017, In : Additive Manufacturing. 18, p. 31-39 9 p.

    Research output: Contribution to journalArticle

    Powders
    Lasers
    Substrates
    Energy absorption
    Processing
    2016
    27 Citations (Scopus)

    Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process

    Dunbar, A. J., Denlinger, E. R., Heigel, J., Michaleris, P., Guerrier, P., Martukanitz, R. & Simpson, T. W., Oct 1 2016, In : Additive Manufacturing. 12, p. 25-30 6 p.

    Research output: Contribution to journalArticle

    3D printers
    Temperature measurement
    Powders
    Fusion reactions
    Lasers
    2014

    Laser beam - Material interaction and thermal absorption model validation

    Lia, F., Park, J. Z., Tressler, J. F. & Martukanitz, R., Jan 1 2014, Materials Science and Technology Conference and Exhibition 2014, MS and T 2014. Association for Iron and Steel Technology, AISTECH, p. 2019-2035 17 p. (Materials Science and Technology Conference and Exhibition 2014, MS and T 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beams
    Lasers
    Substrates
    Calorimetry
    Calorimeters
    4 Citations (Scopus)

    Taking the next step in additive manufacturing

    Martukanitz, R. & Hollingsworth, J., 2014, In : Welding Journal. 93, 3, p. 40-44 5 p.

    Research output: Contribution to journalArticle

    3D printers
    Electron beams
    Metals
    Electron beam welding
    Shopping centers
    45 Citations (Scopus)

    Toward an integrated computational system for describing the additive manufacturing process for metallic materials

    Martukanitz, R., Michaleris, P., Palmer, T., Debroy, T., Liu, Z., Otis, R., Heo, T. W. & Chen, L., Oct 1 2014, In : Additive Manufacturing. 1, p. 52-63 12 p.

    Research output: Contribution to journalArticle

    3D printers
    2 Citations (Scopus)

    Toward metamodels for composable and reusable additive manufacturing process models

    Witherell, P., Feng, S. C., Martukanitz, R., Simpson, T. W., John, D. B. S., Michaleris, P., Liu, Z. & Chen, L., Jan 1 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3D printers
    Metamodel
    Process Model
    Manufacturing
    Modeling and Simulation
    36 Citations (Scopus)

    Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models

    Witherell, P., Feng, S., Simpson, T. W., Saint John, D. B., Michaleris, P., Liu, Z., Chen, L. & Martukanitz, R., Dec 1 2014, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 136, 6, 061025-1.

    Research output: Contribution to journalArticle

    3D printers
    Powder metals
    Reusability
    Fusion reactions
    2013
    2 Citations (Scopus)

    A process planning framework for lens metal additive manufacturing

    Chernow, E., Samperi, M., Joshi, S. B., Simpson, T. W., Reutzel, T. & Martukanitz, R., 2013, IIE Annual Conference and Expo 2013. Institute of Industrial Engineers, p. 2377-2383 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3D printers
    Process planning
    Lenses
    Metals
    Lasers
    2012
    8 Citations (Scopus)

    Identifying performance differences in transmissive and reflective laser optics using beam diagnostic tools

    Blecher, J., Palmer, T., Kelly, S. M. & Martukanitz, R., Jul 1 2012, In : Welding Journal. 91, 7

    Research output: Contribution to journalArticle

    Laser optics
    Optics
    High power lasers
    Fiber lasers
    Welds
    2011
    6 Citations (Scopus)

    Mechanical properties of parts formed by laser additive manufacturing

    Copley, S., Martukanitz, R., Frazier, W. & Rigdon, M., Sep 2011, Advanced Materials and Processes, 169, 9, p. 26-29 4 p.

    Research output: Contribution to specialist publicationArticle

    3D printers
    Mechanical properties
    Lasers
    Sintering
    Stereolithography
    1 Citation (Scopus)

    Minimizing buckling distortion in welding by hybrid laser-arc welding

    Kelly, S. M., Martukanitz, R. & Reutzel, E. W., May 1 2011, Minimization of Welding Distortion and Buckling: Modelling and Implementation. Elsevier Ltd, p. 241-273 33 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

    Laser beam welding
    Electric arc welding
    Buckling
    Welding
    Welds
    2010
    40 Citations (Scopus)

    Hybrid laser arc welding process evaluation on DH36 and EH36 steel

    Roepke, C., Liu, S., Kelly, S. & Martukanitz, R., Jul 1 2010, In : Welding Journal (Miami, Fla). 89, 7

    Research output: Contribution to journalArticle

    Laser beam welding
    Steel
    Electric arc welding
    Lasers
    Welds

    Low power laser hybrid gas metal arc welding on A36 steel

    Roepke, C., Liu, S., Kelly, S. & Martukanitz, R., Dec 1 2010, Materials Science and Technology Conference and Exhibition 2010, MS and T'10. Vol. 4. p. 2775-2786 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas metal arc welding
    Steel
    Lasers
    Laser beam welding
    Electric arc welding
    2009
    18 Citations (Scopus)

    Using hybrid laser-Arc welding to reduce distortion in ship panels

    Kelly, S. M., Brown, S. W., Tressler, J. F., Martukanitz, R. & Ludwig, M. J., Mar 1 2009, In : Welding Journal (Miami, Fla). 88, 3, p. 32-36 5 p.

    Research output: Contribution to journalArticle

    Laser beam welding
    Electric arc welding
    Ships
    Submerged arc welding
    Costs
    2008
    67 Citations (Scopus)
    laser welding
    Laser beam welding
    Steel
    convective heat transfer
    Laser modes
    14 Citations (Scopus)

    Hybrid laser-GMA welding for improved affordability

    Reutzel, E. W., Kelly, S. M., Sullivan, M. J., Huang, T. D., Kvidahl, L. & Martukanitz, R., May 1 2008, In : Journal of Ship Production. 24, 2, p. 72-81 10 p.

    Research output: Contribution to journalArticle

    Gas metal arc welding
    Shipyards
    Welding
    Welds
    Pipe
    2007
    24 Citations (Scopus)

    Absorption of laser irradiation in a porous powder layer

    McVey, R. W., Melnychuk, R. M., Todd Copley, J. & Martukanitz, R., Nov 1 2007, In : Journal of Laser Applications. 19, 4, p. 214-224 11 p.

    Research output: Contribution to journalArticle

    Laser beam effects
    Powders
    irradiation
    attenuation coefficients
    Copper powder

    Deposition efficiencies of laser cladding with various sources

    Martukanitz, R., Tressler, J. F. & McDermott, J. H., 2007, 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser cladding
    Fiber lasers
    Lasers
    Diodes
    Deposition rates
    2 Citations (Scopus)

    Laser absorption within a powder layer and the numerical modeling of heat transfer during the laser cladding process

    McVey, R. W., Martukanitz, R. & Kelly, S. M., Dec 1 2007, 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser cladding
    Powders
    Heat transfer
    Lasers
    Numerical models
    2006

    Experimental and computational investigation of fusion zone geometries during autogenous keyhole mode laser welds

    Rai, R., Kelly, S. M., Martukanitz, R. & Debroy, T., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 805

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser modes
    heat transfer
    Welds
    Fusion reactions
    laser

    Failure criteria for laser and hybrid welded sandwich panels

    Meinert, Jr., K. C., Martukanitz, R. & Koss, D. A., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 1907

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welds
    laser
    buckling
    Lasers
    Buckling
    1 Citation (Scopus)

    Low heat input welding for thin steel fabrication

    Kelly, S. M., Martukanitz, R., Michaleris, P., Bugarewicz, M., Huang, T. D. & Kvidahl, L., 2006, 2005 SNAME Maritime Technology Conference and Expo and Ship Production Symposium.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welding
    Fabrication
    Steel
    Laser beam welding
    Electric arc welding
    9 Citations (Scopus)

    Low heat input welding for thin steel fabrication

    Kelly, S. M., Martukanitz, R., Michaleris, P., Bugarewicz, M., Huang, T. D. & Kvidahl, L., May 2006, In : Journal of Ship Production. 22, 2, p. 105-109 5 p.

    Research output: Contribution to journalArticle

    Welding
    Fabrication
    Steel
    Laser beam welding
    Electric arc welding
    24 Citations (Scopus)

    Reactive gas shielding during laser surface alloying for production of hard coatings

    Babu, S. S., Kelly, S. M., Murugananth, M. & Martukanitz, R., Jan 24 2006, In : Surface and Coatings Technology. 200, 8, p. 2663-2671 9 p.

    Research output: Contribution to journalArticle

    titanium carbides
    Titanium carbide
    Hard coatings
    Alloying
    Shielding
    2005
    31 Citations (Scopus)

    A critical review of laser beam welding

    Martukanitz, R., Jul 21 2005, In : Proceedings of SPIE - The International Society for Optical Engineering. 5706, p. 11-24 14 p., 02.

    Research output: Contribution to journalConference article

    Laser beam welding
    Welding
    welding
    Laser Beam
    laser beams
    1 Citation (Scopus)

    Design of process-material-shielding combinations for hard coatings using laser surface alloying

    Babu, S. S., Kelly, S. M., Martukanitz, R. & Murugananth, M., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 473-478 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Hard coatings
    Alloying
    Shielding
    Lasers
    4 Citations (Scopus)

    Development of the laser stir welding process for aluminum laser beam welding

    Martukanitz, R., Stol, I., Tressler, J. F. & Warren, C. J., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 712-718 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beam welding
    Welding
    Welds
    Aluminum
    Lasers

    Examination of the process efficiency during hybrid laser-arc welding

    Kelly, S. M., Reutzel, E. W., Whitney, E. J., Tressler, J. F. & Martukanitz, R., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. Vol. 3. p. 69-76 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beam welding
    Electric arc welding
    Laser beams
    Automobile manufacture
    Gas metal arc welding

    Experimental analysis of practical aspects of hybrid welding of thick sections

    Reutzel, E. W., Kelly, S. M., Tressler, J. F. & Martukanitz, R., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welding
    Welds
    Gas lasers
    Shipbuilding
    Laser beam welding
    1 Citation (Scopus)

    Improving the understanding of laser deposition processes through process simulation

    Martukanitz, R., Naber, A. C., Melnychuk, R. M. & McVey, R. W., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 59-63 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Powders
    Lasers
    Powder metals
    Laser radiation
    Laser beams

    Laser-gma hybrid welding: Distortion analysis and design optimization modelling techniques

    Bugarewicz, M. M., Kelly, S. M., Michaleris, P., Reutzel, E. W. & Martukanitz, R., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 535-542 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas lasers
    Welding
    Lasers
    Welds
    Shipbuilding
    6 Citations (Scopus)

    Laser-GMA hybrid welding: Process monitoring and thermal modeling

    Reutzel, E. W., Kelly, S. M., Martukanitz, R., Bugarewicz, M. M. & Michaleris, P., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 143-148 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas lasers
    Process monitoring
    Gas metal arc welding
    Welding
    Welds
    2004
    1 Citation (Scopus)

    A phase-field model for simulation of the laser cladding process using a discontinuous viscosity variable and its approximation by finite element method

    Naber, A. & Martukanitz, R., 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser cladding
    mass transport
    Powders
    finite element method
    Mass transfer
    12 Citations (Scopus)

    Dynamic absorption of a powder layer

    Martukanitz, R., Melnychuk, R. M., Stefanski, M. S. & Copley, S. M., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Powders
    irradiation
    Iron powder
    laser
    Nickel alloys
    3 Citations (Scopus)

    Laser assisted cleaning of oxide films on SUS409 stainless steel

    Guo, H., Martukanitz, R. & Debroy, T., Nov 1 2004, In : Journal of Laser Applications. 16, 4, p. 236-244 9 p.

    Research output: Contribution to journalArticle

    Stainless Steel
    cleaning
    Oxide films
    oxide films
    stainless steels

    Laser-assisted writing of copper films through Nd:YAG laser radiation

    Martukanitz, R., Harster, R., Conklin, D. & Wagner, S., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser radiation
    Copper
    irradiation
    laser
    Irradiation
    7 Citations (Scopus)

    Sensing for monitoring of the laser-GMAW hybrid welding process

    Travis, D., Dearden, G., Watkins, K. G., Reutzel, E. W., Martukanitz, R. & Tressler, J. F., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas metal arc welding
    welding
    Welding
    laser
    Lasers
    20 Citations (Scopus)

    Sintering of zirconia nanopowder by microwave-laser hybrid process

    Peelamedu, R., Badzian, A., Roy, R. & Martukanitz, R., Jan 1 2004, In : Journal of the American Ceramic Society. 87, 9, p. 1806-1809 4 p.

    Research output: Contribution to journalArticle

    Zirconia
    Sintering
    laser
    Microwaves
    Lasers

    The use of reactive gas shielding for production of hard coatings by laser surface alloying

    Babu, S. S., Kelly, S. M., Murugananth, M. & Martukanitz, R., 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Hard coatings
    Steel
    Alloying
    Shielding
    coating
    2003
    1 Citation (Scopus)

    Path planning strategies for laser line forming

    Reutzel, E. W., Gombotz, K., Martukanitz, R. & Michaleris, P., Dec 1 2003, ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. 106

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    inverse problem
    Motion planning
    Inverse problems
    laser
    heating
    2002
    1 Citation (Scopus)

    Continuing development of a laser line forming system

    Reutzel, E. W., Aburdene, J. U., Gombotz, K. J., Magnusen, J. P., Martukanitz, R., Michaleris, P. & Zhang, L., Dec 1 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    laser
    Lasers
    Laser radiation
    Motion planning
    Robotics

    Materials modeling for advanced coating systems

    Martukanitz, R. & Babu, S. S., 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    coating
    Coatings
    modeling
    Laser cladding
    Phase stability
    44 Citations (Scopus)

    Toward prediction of microstructural evolution during laser surface alloying

    Babu, S. S., Martukanitz, R., Parks, K. D. & David, S. A., Jan 1 2002, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 33, 4, p. 1189-1200 12 p., 220.

    Research output: Contribution to journalArticle

    Microstructural evolution
    Alloying
    alloying
    tungsten carbides
    Tungsten carbide
    2000
    Aluminum copper alloys
    Filler metals
    copper alloys
    Silicon
    infiltration
    3 Citations (Scopus)

    Loss of strength within the heat affected zone of Al-Cu and Al-Cu-Li alloys

    Martukanitz, R., Wilson, A. L. & Howell, P. R., 2000, In : Materials Science Forum. 331

    Research output: Contribution to journalArticle

    heat affected zone
    Heat affected zone
    yield strength
    viability
    aluminum alloys

    The application of the solute sweeping model for grain boundary liquation during welding and sub-solidus annealing of an Al-Cu alloy

    Wilson, A. L., Martukanitz, R. & Howell, P. R., 2000, In : Materials Science Forum. 331-337 II, p. 1113-1118 6 p.

    Research output: Contribution to journalArticle

    heat affected zone
    solidus
    Heat affected zone
    welding
    Phase equilibria