Richard Martukanitz

    • 707 Citations
    • 14 h-Index
    1982 …2019
    If you made any changes in Pure, your changes will be visible here soon.

    Research Output 1982 2019

    Filter
    Conference contribution
    2017

    Experimental comparison of a traditionally built versus additively manufactured aircraft heat exchanger

    Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jan 1 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0902

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Heat exchangers
    Aircraft
    Pressure drop
    Geometry
    Heat transfer
    2014

    Laser beam - Material interaction and thermal absorption model validation

    Lia, F., Park, J. Z., Tressler, J. F. & Martukanitz, R., Jan 1 2014, Materials Science and Technology Conference and Exhibition 2014, MS and T 2014. Association for Iron and Steel Technology, AISTECH, p. 2019-2035 17 p. (Materials Science and Technology Conference and Exhibition 2014, MS and T 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beams
    Lasers
    Substrates
    Calorimetry
    Calorimeters
    2 Citations (Scopus)

    Toward metamodels for composable and reusable additive manufacturing process models

    Witherell, P., Feng, S. C., Martukanitz, R., Simpson, T. W., John, D. B. S., Michaleris, P., Liu, Z. & Chen, L., Jan 1 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3D printers
    Metamodel
    Process Model
    Manufacturing
    Modeling and Simulation
    2013
    2 Citations (Scopus)

    A process planning framework for lens metal additive manufacturing

    Chernow, E., Samperi, M., Joshi, S. B., Simpson, T. W., Reutzel, T. & Martukanitz, R., 2013, IIE Annual Conference and Expo 2013. Institute of Industrial Engineers, p. 2377-2383 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3D printers
    Process planning
    Lenses
    Metals
    Lasers
    2010

    Low power laser hybrid gas metal arc welding on A36 steel

    Roepke, C., Liu, S., Kelly, S. & Martukanitz, R., Dec 1 2010, Materials Science and Technology Conference and Exhibition 2010, MS and T'10. Vol. 4. p. 2775-2786 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas metal arc welding
    Steel
    Lasers
    Laser beam welding
    Electric arc welding
    2007

    Deposition efficiencies of laser cladding with various sources

    Martukanitz, R., Tressler, J. F. & McDermott, J. H., 2007, 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser cladding
    Fiber lasers
    Lasers
    Diodes
    Deposition rates
    2 Citations (Scopus)

    Laser absorption within a powder layer and the numerical modeling of heat transfer during the laser cladding process

    McVey, R. W., Martukanitz, R. & Kelly, S. M., Dec 1 2007, 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser cladding
    Powders
    Heat transfer
    Lasers
    Numerical models
    2006

    Experimental and computational investigation of fusion zone geometries during autogenous keyhole mode laser welds

    Rai, R., Kelly, S. M., Martukanitz, R. & Debroy, T., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 805

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser modes
    heat transfer
    Welds
    Fusion reactions
    laser

    Failure criteria for laser and hybrid welded sandwich panels

    Meinert, Jr., K. C., Martukanitz, R. & Koss, D. A., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 1907

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welds
    laser
    buckling
    Lasers
    Buckling
    1 Citation (Scopus)

    Low heat input welding for thin steel fabrication

    Kelly, S. M., Martukanitz, R., Michaleris, P., Bugarewicz, M., Huang, T. D. & Kvidahl, L., 2006, 2005 SNAME Maritime Technology Conference and Expo and Ship Production Symposium.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welding
    Fabrication
    Steel
    Laser beam welding
    Electric arc welding
    2005
    1 Citation (Scopus)

    Design of process-material-shielding combinations for hard coatings using laser surface alloying

    Babu, S. S., Kelly, S. M., Martukanitz, R. & Murugananth, M., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 473-478 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Hard coatings
    Alloying
    Shielding
    Lasers
    4 Citations (Scopus)

    Development of the laser stir welding process for aluminum laser beam welding

    Martukanitz, R., Stol, I., Tressler, J. F. & Warren, C. J., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 712-718 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beam welding
    Welding
    Welds
    Aluminum
    Lasers

    Examination of the process efficiency during hybrid laser-arc welding

    Kelly, S. M., Reutzel, E. W., Whitney, E. J., Tressler, J. F. & Martukanitz, R., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. Vol. 3. p. 69-76 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beam welding
    Electric arc welding
    Laser beams
    Automobile manufacture
    Gas metal arc welding

    Experimental analysis of practical aspects of hybrid welding of thick sections

    Reutzel, E. W., Kelly, S. M., Tressler, J. F. & Martukanitz, R., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welding
    Welds
    Gas lasers
    Shipbuilding
    Laser beam welding
    1 Citation (Scopus)

    Improving the understanding of laser deposition processes through process simulation

    Martukanitz, R., Naber, A. C., Melnychuk, R. M. & McVey, R. W., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 59-63 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Powders
    Lasers
    Powder metals
    Laser radiation
    Laser beams

    Laser-gma hybrid welding: Distortion analysis and design optimization modelling techniques

    Bugarewicz, M. M., Kelly, S. M., Michaleris, P., Reutzel, E. W. & Martukanitz, R., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 535-542 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas lasers
    Welding
    Lasers
    Welds
    Shipbuilding
    6 Citations (Scopus)

    Laser-GMA hybrid welding: Process monitoring and thermal modeling

    Reutzel, E. W., Kelly, S. M., Martukanitz, R., Bugarewicz, M. M. & Michaleris, P., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 143-148 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas lasers
    Process monitoring
    Gas metal arc welding
    Welding
    Welds
    2004
    1 Citation (Scopus)

    A phase-field model for simulation of the laser cladding process using a discontinuous viscosity variable and its approximation by finite element method

    Naber, A. & Martukanitz, R., 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser cladding
    mass transport
    Powders
    finite element method
    Mass transfer
    12 Citations (Scopus)

    Dynamic absorption of a powder layer

    Martukanitz, R., Melnychuk, R. M., Stefanski, M. S. & Copley, S. M., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Powders
    irradiation
    Iron powder
    laser
    Nickel alloys

    Laser-assisted writing of copper films through Nd:YAG laser radiation

    Martukanitz, R., Harster, R., Conklin, D. & Wagner, S., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser radiation
    Copper
    irradiation
    laser
    Irradiation
    7 Citations (Scopus)

    Sensing for monitoring of the laser-GMAW hybrid welding process

    Travis, D., Dearden, G., Watkins, K. G., Reutzel, E. W., Martukanitz, R. & Tressler, J. F., Dec 1 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas metal arc welding
    welding
    Welding
    laser
    Lasers

    The use of reactive gas shielding for production of hard coatings by laser surface alloying

    Babu, S. S., Kelly, S. M., Murugananth, M. & Martukanitz, R., 2004, ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Hard coatings
    Steel
    Alloying
    Shielding
    coating
    2003
    1 Citation (Scopus)

    Path planning strategies for laser line forming

    Reutzel, E. W., Gombotz, K., Martukanitz, R. & Michaleris, P., Dec 1 2003, ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. 106

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    inverse problem
    Motion planning
    Inverse problems
    laser
    heating
    2002
    1 Citation (Scopus)

    Continuing development of a laser line forming system

    Reutzel, E. W., Aburdene, J. U., Gombotz, K. J., Magnusen, J. P., Martukanitz, R., Michaleris, P. & Zhang, L., Dec 1 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    laser
    Lasers
    Laser radiation
    Motion planning
    Robotics

    Materials modeling for advanced coating systems

    Martukanitz, R. & Babu, S. S., 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    coating
    Coatings
    modeling
    Laser cladding
    Phase stability
    1998

    A fully quantitative characterization of the heat affected zone in a welded aluminium copper alloy

    Martukanitz, R. & Howell, P. R., 1998, Analysis of In-Service Failures and Advances in Microstructural Characterization. Abramovici, E., Northwood, D. O., Shehata, M. T., Wylie, J., Northwood, D. O., Abramovici, E., Shehata, M. T. & Wylie, J. (eds.). Vol. 26. p. 475-480 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Aluminum copper alloys
    Heat affected zone
    Precipitates
    Fusion reactions
    Metal foil
    5 Citations (Scopus)

    Experimental and Computer Simulation of Grain Growth in HSLA-100/80 Steels During Welding and Cladding

    Wilson, A. L., Martukanitz, R. & Howell, P. R., 1998, ASM Proceedings of the International Conference: Trends in Welding Research. Vitek, J. M., David, S. A., Johnson, J. A., Smartt, H. B. & DebRoy, T. (eds.). p. 161-166 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Steel
    Heat affected zone
    Grain growth
    Welding
    Computer simulation
    1993
    18 Citations (Scopus)

    Laser weld reconstitution of conventional charpy and miniaturized notch test (MNT) specimens

    Manahan, M. P., Williams, J. & Martukanitz, R., Dec 1 1993, ASTM Special Technical Publication. Anon (ed.). 1204 ed. Publ by ASTM, p. 62-76 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Laser beam welding
    Welds
    Lasers
    Nuclear power plants
    Experiments
    1992
    3 Citations (Scopus)

    Laser processing of discontinuously reinforced aluminum composites

    Meinert, Jr., K. C., Martukanitz, R. & Bhagat, R. B., 1992, Proceedings of the American Society for Composites. Publ by Technomic Publ Co Inc, p. 168-177 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Aluminum
    Lasers
    Composite materials
    Processing
    Silicon carbide
    1987
    7 Citations (Scopus)

    MICROSTRUCTURAL AND MICROHARDNESS CHARACTERIZATIONS OF A GAS METAL ARC WELDED ALUMINUM-LITHIUM ALLOY.

    Martukanitz, R., Stevens, R. H. & Johnston, L. R., 1987, Microstructural Science. ASM, Vol. 14. p. 53-64 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Lithium alloys
    Microhardness
    Aluminum alloys
    Fillers
    Heat affected zone
    1986
    2 Citations (Scopus)

    MODELING OF THE HEAT AFFECTED ZONE OF ALUMINUM ARC WELDS.

    Martukanitz, R., 1986, Unknown Host Publication Title. David, S. A. (ed.). ASM Int, p. 193-201 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Heat affected zone
    Welding
    Welds
    Hardness
    Aluminum
    1984

    CONSTRUCTION OF A THREE DIMENSIONAL HEAT TRANSFER MODEL FOR ALUMINUM WELDING.

    Martukanitz, R. & Zayas, J. R., 1984, Unknown Host Publication Title. AWS, p. 177-179 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Welding
    Heat transfer
    Aluminum
    1982
    4 Citations (Scopus)

    SOURCES OF POROSITY IN GAS METAL ARC WELDING OF ALUMINUM.

    Martukanitz, R. & Michnuk, P. R., 1982, Unknown Host Publication Title. ASM, p. 315-330 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Gas metal arc welding
    Porosity
    Aluminum