• 445 Citations
  • 12 h-Index
20122020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 445 Citations
  • 12 h-Index
  • 49 Conference contribution
  • 32 Article
  • 2 Conference article
2020

From the simulation center to the bedside: Validating the efficacy of a dynamic haptic robotic trainer in internal jugular central venous catheter placement

Chen, H. E., Sonntag, C. C., Mirkin, K. A., Pepley, D. F., Han, D. C., Moore, J. Z. & Miller, S. R., Feb 2020, In : American Journal of Surgery. 219, 2, p. 379-384 6 p.

Research output: Contribution to journalArticle

2019
3 Scopus citations

BUILDing a community of female makers through hands-on experiences in a university MakerSpace

Menold, J., Berdanier, C., Ritter, S., Handley, M., Grady, C., Byron, M., Starkey, E., Miller, S. & Parkinson, M., Oct 2019, 2019 IEEE Frontiers in Education Conference, FIE 2019. Institute of Electrical and Electronics Engineers Inc., 9028553. (Proceedings - Frontiers in Education Conference, FIE; vol. 2019-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

But will it print? Assessing student use of design for additive manufacturing and exploring its effect on design performance and manufacturability

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Can Haptic Simulators Distinguish Expert Performance? A Case Study in Central Venous Catheterization in Surgical Education

Chen, H. E., Yovanoff, M. A., Pepley, D. F., Sonntag, C. C., Mirkin, K. A., Han, D. C., Moore, J. Z. & Miller, S. R., Feb 1 2019, In : Simulation in Healthcare. 14, 1, p. 35-42 8 p.

Research output: Contribution to journalArticle

Complex solutions for complex problems? Exploring the effects of task complexity on student use of design for additive manufacturing and creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Do students want to dissect? A survey of student opinions on the use of product dissection in the classroom

Riegel, C., Starkey, E. M., Hunter, S. T. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluating surgical resident needle insertion skill gains in central venous catheterization training

Chen, H. E., Yovanoff, M. A., Pepley, D. F., Prabhu, R. S., Sonntag, C. C., Han, D., Moore, J. Z. & Miller, S. R., Jan 2019, In : Journal of Surgical Research. 233, p. 351-359 9 p.

Research output: Contribution to journalArticle

2 Scopus citations

Exploring biases between human and machine generated designs

Lopez, C. E., Miller, S. R. & Tucker, C. S., Feb 1 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 2, 021104.

Research output: Contribution to journalArticle

2 Scopus citations

Interpreting idea maps: Pairwise comparisons reveal what makes ideas novel

Ahmed, F., Ramachandran, S. K., Fuge, M., Hunter, S. & Miller, S., Feb 1 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 2, 021102.

Research output: Contribution to journalArticle

1 Scopus citations

Leveraging animations to enhance learning through virtual product dissection

Kearney, K. G., Starkey, E. M. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Looks can be deceiving: Gaze pattern differences between novices and experts during placement of central lines

Chen, H. E., Sonntag, C. C., Pepley, D. F., Prabhu, R. S., Han, D. C., Moore, J. Z. & Miller, S. R., Feb 2019, In : American Journal of Surgery. 217, 2, p. 362-367 6 p.

Research output: Contribution to journalArticle

Low-Cost Haptic Simulation Using Material Fracture

Pepley, D. F., Chen, H. E., Tang, Y., Adhikary, S. D., Miller, S. R. & Moore, J. Z., Oct 1 2019, In : IEEE Transactions on Haptics. 12, 4, p. 563-570 8 p., 8704968.

Research output: Contribution to journalArticle

Measuring and optimizing design variety using herfindahl index

Ahmed, F., Ramachandran, S. K., Fuge, M., Hunter, S. & Miller, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Should it stay or should it go? A case study of concept screening in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The trajectory of psychological safety in engineering teams: A longitudinal exploration in engineering design education

Miller, S., Jablokow, K., Marhefka, J., Mohammed, S., Heininger, K. & Ritter, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2018

Building Ultrasound Phantoms with Modified Polyvinyl Chloride: A Comparison of Needle Insertion Forces and Sonographic Appearance with Commercial and Traditional Simulation Materials

Pepley, D. F., Sonntag, C. C., Prabhu, R. S., Yovanoff, M. A., Han, D. C., Miller, S. R. & Moore, J. Z., Jun 1 2018, In : Simulation in Healthcare. 13, 3, p. 149-153 5 p.

Research output: Contribution to journalArticle

3 Scopus citations

Confidently exploring the solution space: The within-subject effects of product dissection on design variety and creative self-efficacy

Starkey, E. M., Alzayed, M. A., Hunter, S. T. & Miller, S. R., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fixated on fixation? An exploration of the benefits and deficits of design "Fixation" in engineering design

Starkey, E. M., Zeng, W. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Helping teams expand the breadth of their solution space through product dissection: A simulation based investigation

Alzayed, M. A., McComb, C., Hunter, S. T. & Miller, S. R., 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

How engineering design students' creative preferences and cognitive styles impact their concept generation and screening

Heininger, K., Chen, H. E., Jablokow, K. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Human validation of computer vs human generated design sketches

Lopez, C., Miller, S. R. & Tucker, C. S., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Integrating cadaver needle forces into a haptic robotic simulator

Pepley, D. F., Yovanoff, M. A., Mirkin, K. A., Miller, S. R., Han, D. C. & Moore, J. Z., Mar 1 2018, In : Journal of Medical Devices, Transactions of the ASME. 12, 1, 014501.

Research output: Contribution to journalArticle

Investigating the Effect of Simulator Functional Fidelity and Personalized Feedback on Central Venous Catheterization Training

Yovanoff, M. A., Chen, H. E., Pepley, D. F., Mirkin, K. A., Han, D. C., Moore, J. Z. & Miller, S. R., Sep 1 2018, In : Journal of surgical education. 75, 5, p. 1410-1421 12 p.

Research output: Contribution to journalArticle

3 Scopus citations
7 Scopus citations

Sensibuildity: The design of a communication system to identify and prevent work-related injuries in the construction industry

Alzayed, M. A., Castro E Costa, E., Agarwal, P., Kakarlamudi, S., Bilén, S. G. & Miller, S., Jan 1 2018, 62nd Human Factors and Ergonomics Society Annual Meeting, HFES 2018. Human Factors and Ergonomics Society Inc., p. 1631-1635 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching design freedom: Exploring the effects of design for additive manufacturing education on the cognitive components of students’ creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

The earlier the better? Investigating the importance of timing on effectiveness of design for additive manufacturing education

Prabhu, R., Simpson, T. W., Miller, S. R. & Meisel, N. A., 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Uncovering ownership bias: The influence of idea goodness and creativity on design professionals' concept selection practices

Zheng, X. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Unpacking subjective creativity ratings: Using embeddings to explain and measure idea novelty

Ahmed, F., Fuge, M., Hunter, S. & Miller, S., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

When are designers willing to take risks? How concept creativity and prototype fidelity influence perceived risk

Starkey, E. M., Menold, J. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2017

An investigation into the driving factors of creativity in design for additive manufacturing

Barclift, M., Simpson, T. W., Nusiner, M. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Can wearable sensors be used to capture engineering design team interactions? An investigation into the reliability of sociometric badges

Chen, H. E. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Does designing for additive manufacturing help us be more creative? an exploration in engineering design education

Sinha, S., Chen, H. E., Meisel, N. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Do technological advancements lead to learning enhancements? an exploration in virtual product dissection

Starkey, E. M., Spencer, C., Lesniak, K., Tucker, C. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Linking creativity measurements to product market favorability: A data-mining approach

Christian, E. L. B., Zheng, X. & Miller, S. R., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Measurement of syringe needle forces for a haptic robotic training device

Pepley, D., Yovanoff, M., Mirkin, K., Miller, S., Han, D. & Moore, J., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Mining for creativity: Determining the creativity of ideas through data mining techniques

Toh, C. A., Starkey, E. M., Tucker, C. S. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Personalized learning in medical education: Designing a user interface for a dynamic haptic robotic trainer for central venous catheterization

Yovanoff, M., Pepley, D., Mirkin, K., Moore, J., Han, D. & Miller, S., Jan 1 2017, Proceedings of the Human Factors and Ergonomics Society 2017 International Annual Meeting, HFES 2017. Human Factors an Ergonomics Society Inc., p. 615-619 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 2017-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Risky business: The driving factors of creative risk taking attitudes in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Training Surgical Residents With a Haptic Robotic Central Venous Catheterization Simulator

Pepley, D. F., Gordon, A. B., Yovanoff, M. A., Mirkin, K. A., Miller, S. R., Han, D. C. & Moore, J. Z., Nov 2017, In : Journal of surgical education. 74, 6, p. 1066-1073 8 p.

Research output: Contribution to journalArticle

7 Scopus citations
2016

Abandoning creativity: The evolution of creative ideas in engineering design course projects

Starkey, E., Toh, C. A. & Miller, S. R., Nov 1 2016, In : Design Studies. 47, p. 47-72 26 p.

Research output: Contribution to journalArticle

22 Scopus citations

A virtual reality haptic robotic simulator for central venous catheterization training

Pepley, D., Yovanoff, M., Mirkin, K., Miller, S., Han, D. & Moore, J., Sep 1 2016, In : Journal of Medical Devices, Transactions of the ASME. 10, 3, 030937.

Research output: Contribution to journalArticle

6 Scopus citations