• 435 Citations
  • 12 h-Index
20122020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 435 Citations
  • 12 h-Index
  • 49 Conference contribution
  • 32 Article
  • 2 Conference article
Filter
Conference contribution
2012

The impact of product dissection activities on the novelty of design outcomes

Toh, C. A., Miller, S. R. & Kremer, G. E. O., Dec 1 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. p. 615-624 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Scopus citations

Towards the development of an objective assessment technique for use in engineering design education

Miller, S. R., Bailey, B. P. & Kirlik, A., Jan 1 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Designing public safety mobile applications for disconnected, interrupted, and low bandwidth communication environments

Erickson, P., Weinert, A., Breimyer, P., Samperi, M., Huff, J., Parra, C. & Miller, S. R., Dec 1 2013, 2013 IEEE International Conference on Technologies for Homeland Security, HST 2013. p. 790-796 7 p. 6699028. (2013 IEEE International Conference on Technologies for Homeland Security, HST 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Exploring the utility of product dissection for early-phase idea generation

Toh, C. A. & Miller, S. R., Jan 1 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T06A034. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

Visual inspection or product dissection? The impact of designer-product interactions on engineering design creativity

Toh, C. A. & Miller, S. R., Jan 1 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T06A011. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations
2014

A novel method for providing global assessments of design concepts using single-word adjectives and semantic similarity

Gosnell, C. A. & Miller, S. R., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Effects of over-the-counter medication product family packaging design on knowledge acquisition and consumer preferences

Cho, J., Miller, S. R., Simpson, T. W. & Shooter, S. B., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Motion analysis as an evaluation framework for eye-hand coordination: A case study in ultrasound-guided catheter insertion

Kim, I., Miller, S. R. & Freivalds, A., Jan 1 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Searching for inspiration: An in-depth look at designers example finding practices

Miller, S. R. & Bailey, B. P., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

The impact of virtual dissection on engineering student learning and self-efficacy

Toh, C. A., Disco, C. S. & Miller, S. R., Jan 1 2014, 16th International Conference on Advanced Vehicle Technologies; 11th International Conference on Design Education; 7th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

The role of individual risk attitudes on the selection of creative concepts in engineering design

Toh, C. A. & Miller, S. R., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Scopus citations

Using learning curves to assess resident surgical skill acquisition: A case study of ultrasound-guided catheter insertion

Kim, I., Miller, S. R. & Freivalds, A., Jan 1 2014, 2014 International Annual Meeting of the Human Factors and Ergonomics Society, HFES 2014. Human Factors an Ergonomics Society Inc., p. 2350-2354 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 2014-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2015

Identifying end-user requirements for communication systems in disadvantaged environments

Menold, J., Weizler, L., Liu, Y., Bilen, S. G. & Miller, S., Dec 2 2015, Proceedings of the 5th IEEE Global Humanitarian Technology Conference, GHTC 2015. Institute of Electrical and Electronics Engineers Inc., p. 284-291 8 p. 7343986. (Proceedings of the 5th IEEE Global Humanitarian Technology Conference, GHTC 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Implementing creativity evaluation tools into the concept selection process in engineering education

Starkey, E. M., Gosnell, C. A. & Miller, S. R., Jan 1 2015, 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

My idea is best! ownership bias and its influence on engineering concept selection

Toh, C. A., Patel, A. H., Strohmetz, A. A. & Miller, S. R., Jan 1 2015, 27th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Stochastic event detection in needle-tissue interaction

Kim, I., Gordon, A. & Miller, S. R., Jan 1 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Which one should I pick? Concept selection in engineering design industry

Toh, C. A., Miele, L. M. & Miller, S. R., Jan 1 2015, 27th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations
2016

Design of a virtual reality haptic robotic central venous catheterization training simulator

Pepley, D., Yovanoff, M., Mirkin, K., Han, D., Miller, S. & Moore, J., Jan 1 2016, 40th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

How do I choose? The influence of concept selection methods on student team decision-making

Zheng, X. & Miller, S. R., Jan 1 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Let's get physical? The impact of dissection modality on engineering student design learning

Starkey, E. M., McKay, A. S., Hunter, S. T. & Miller, S. R., Jan 1 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

The Preferences for Creativity Scale (PCS): Identifying the underlying constructs of creative concept selection

Toh, C. A. & Miller, S. R., Jan 1 2016, 28th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations
2017

An investigation into the driving factors of creativity in design for additive manufacturing

Barclift, M., Simpson, T. W., Nusiner, M. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Can wearable sensors be used to capture engineering design team interactions? An investigation into the reliability of sociometric badges

Chen, H. E. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Does designing for additive manufacturing help us be more creative? an exploration in engineering design education

Sinha, S., Chen, H. E., Meisel, N. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Do technological advancements lead to learning enhancements? an exploration in virtual product dissection

Starkey, E. M., Spencer, C., Lesniak, K., Tucker, C. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Linking creativity measurements to product market favorability: A data-mining approach

Christian, E. L. B., Zheng, X. & Miller, S. R., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Measurement of syringe needle forces for a haptic robotic training device

Pepley, D., Yovanoff, M., Mirkin, K., Miller, S., Han, D. & Moore, J., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Mining for creativity: Determining the creativity of ideas through data mining techniques

Toh, C. A., Starkey, E. M., Tucker, C. S. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Personalized learning in medical education: Designing a user interface for a dynamic haptic robotic trainer for central venous catheterization

Yovanoff, M., Pepley, D., Mirkin, K., Moore, J., Han, D. & Miller, S., Jan 1 2017, Proceedings of the Human Factors and Ergonomics Society 2017 International Annual Meeting, HFES 2017. Human Factors an Ergonomics Society Inc., p. 615-619 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 2017-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Risky business: The driving factors of creative risk taking attitudes in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2018

Confidently exploring the solution space: The within-subject effects of product dissection on design variety and creative self-efficacy

Starkey, E. M., Alzayed, M. A., Hunter, S. T. & Miller, S. R., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fixated on fixation? An exploration of the benefits and deficits of design "Fixation" in engineering design

Starkey, E. M., Zeng, W. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Helping teams expand the breadth of their solution space through product dissection: A simulation based investigation

Alzayed, M. A., McComb, C., Hunter, S. T. & Miller, S. R., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

How engineering design students' creative preferences and cognitive styles impact their concept generation and screening

Heininger, K., Chen, H. E., Jablokow, K. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Human validation of computer vs human generated design sketches

Lopez, C., Miller, S. R. & Tucker, C. S., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Sensibuildity: The design of a communication system to identify and prevent work-related injuries in the construction industry

Alzayed, M. A., Castro E Costa, E., Agarwal, P., Kakarlamudi, S., Bilén, S. G. & Miller, S., Jan 1 2018, 62nd Human Factors and Ergonomics Society Annual Meeting, HFES 2018. Human Factors and Ergonomics Society Inc., p. 1631-1635 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching design freedom: Exploring the effects of design for additive manufacturing education on the cognitive components of students’ creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

The earlier the better? Investigating the importance of timing on effectiveness of design for additive manufacturing education

Prabhu, R., Simpson, T. W., Miller, S. R. & Meisel, N. A., Jan 1 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Uncovering ownership bias: The influence of idea goodness and creativity on design professionals' concept selection practices

Zheng, X. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Unpacking subjective creativity ratings: Using embeddings to explain and measure idea novelty

Ahmed, F., Fuge, M., Hunter, S. & Miller, S., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

When are designers willing to take risks? How concept creativity and prototype fidelity influence perceived risk

Starkey, E. M., Menold, J. & Miller, S. R., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2019

BUILDing a community of female makers through hands-on experiences in a university MakerSpace

Menold, J., Berdanier, C., Ritter, S., Handley, M., Grady, C., Byron, M., Starkey, E., Miller, S. & Parkinson, M., Oct 2019, 2019 IEEE Frontiers in Education Conference, FIE 2019. Institute of Electrical and Electronics Engineers Inc., 9028553. (Proceedings - Frontiers in Education Conference, FIE; vol. 2019-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

But will it print? Assessing student use of design for additive manufacturing and exploring its effect on design performance and manufacturability

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Complex solutions for complex problems? Exploring the effects of task complexity on student use of design for additive manufacturing and creativity

Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Do students want to dissect? A survey of student opinions on the use of product dissection in the classroom

Riegel, C., Starkey, E. M., Hunter, S. T. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Leveraging animations to enhance learning through virtual product dissection

Kearney, K. G., Starkey, E. M. & Miller, S. R., Jan 1 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Measuring and optimizing design variety using herfindahl index

Ahmed, F., Ramachandran, S. K., Fuge, M., Hunter, S. & Miller, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Should it stay or should it go? A case study of concept screening in engineering design industry

Zheng, X. & Miller, S. R., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The trajectory of psychological safety in engineering teams: A longitudinal exploration in engineering design education

Miller, S., Jablokow, K., Marhefka, J., Mohammed, S., Heininger, K. & Ritter, S., Jan 1 2019, 31st International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution