• 12784 Citations
  • 60 h-Index
1972 …2019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1972 2019

Filter
Conference contribution
2016
3 Citations (Scopus)

Grain growth modeling for additive manufacturing of nickel based superalloys

Wei, H. L., Mukherjee, T. & Debroy, T., Jan 1 2016, Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016. Rohre, G. S., Rollett, A. D., Holm, E. A., Srolovitz, D., Farjami, S., Manohar, P. & Weiland, H. (eds.). Springer International Publishing AG, p. 265-269 5 p. (Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Nickel
Grain growth
Superalloys
Solidification
2013

Mathematical modeling of laser micro-welding for photovoltaic devices

Raghavan, A., Palmer, T. & Debroy, T., 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 635-640 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Welds
Lasers
Processing
Diffractive optical elements

Mathematical modeling of the heat and mass transport during laser processing of silicon

Blecher, J. J., Palmer, T. & Debroy, T., 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 983-988 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon
Mass transfer
Doping (additives)
Lasers
Processing
2 Citations (Scopus)

Probing load bearing capacity of circular and non-circular tool pins in friction stir welding

Mehta, M., De, A. & Debroy, T., Jul 31 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 563-571 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Bearing capacity
Shear stress
Loads (forces)
Torsional stress

Role of processing parameters on morphology, resistance and composition of laser fired contacts

Raghavan, A., Palmer, T., Domask, A., Mohney, S. E., Reutzel, E. W. & Debroy, T., 2013, Laser Material Processing for Solar Energy Devices II. Vol. 8826. 882606

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact
Laser
Lasers
Processing
Chemical analysis
2012
1 Citation (Scopus)

Modeling of contact geometry and dopant profile during laser - Silicon interaction

Raghavan, A., Blecher, J. J., Palmer, T., Reutzel, E. W. & Debroy, T., Dec 1 2012, Laser Material Processing for Solar Energy. Vol. 8473. 847304

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact Geometry
Silicon
Doping (additives)
Laser
Geometry
2010

Entrainment effects on annular flow in a keyhole with free surface

Kuo, S. C., Wei, P. S. & Debroy, T., Apr 1 2010, 6th International Symposium on Multiphase flow, Heat Mass Transfer and Energy Conversion. Vol. 1207. p. 557-562 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

annular flow
entrainment
vapors
two phase flow
welding
2009
5 Citations (Scopus)

Arc-laser interactions and heat transfer and fluid flow in hybrid welding

Ribic, B. D., Rai, R., Palmer, T. & Debroy, T., Dec 1 2009, Trends in Welding Research - Proceedings of the 8th International Conference. p. 313-320 8 p. (ASM Proceedings of the International Conference: Trends in Welding Research).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow of fluids
Welding
Heat transfer
Welds
Lasers
2 Citations (Scopus)

Tailoring friction stir welds of aluminum alloys using a differential evolution and a transport phenomena based model

Nandan, R., Debroy, T., Prabu, B. & De, A., 2009, Trends in Welding Research - Proceedings of the 8th International Conference. p. 542-548 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum alloys
Welds
Friction
Friction stir welding
Welding

The effects of mach number on keyhole shape in high intensity beam welding or drilling

Kuo, S. C., Wei, P. S. & Debroy, T., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 747-751 5 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Two phase flow
Mach number
Drilling
Welding
Vapors
2007

Laser weld repair of single crystal Ni-base superalloys

Anderson, T., DuPont, J. & Debroy, T., 2007, Materials Science and Technology Conference and Exhibition, MS and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems". Vol. 5. p. 3165-3174 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat resistant alloys
Superalloys
Welds
Repair
Single crystals
2006

Experimental and computational investigation of fusion zone geometries during autogenous keyhole mode laser welds

Rai, R., Kelly, S. M., Martukanitz, R. & Debroy, T., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics - Congress Proceedings. 805

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser modes
heat transfer
Welds
Fusion reactions
laser
1 Citation (Scopus)

In-situ observations of phase transformations during welding of 1045 steel using spatially resolved and time resolved x-ray diffraction

Elmer, J. W., Palmer, T. & Debroy, T., Dec 8 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. p. 41-51 11 p. (Modeling of Casting, Welding and Advanced Solidification Processes - XI; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Diffraction
Phase transitions
X rays
Steel
2005
3 Citations (Scopus)

Advanced techniques for in-situ monitoring of phase transformations during welding using synchrotron-based x-ray diffraction

Elmer, J. W., Palmer, T., Zhang, W. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 901-910 10 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchrotrons
Welding
Diffraction
Phase transitions
X rays
2 Citations (Scopus)

Alloying element vaporization and liquid metal expulsion during laser microjoining of stainless steel with short pulse

He, X., Norris, J. T., Fuerschbach, P. W. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 109-114 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Alloying elements
Liquid metals
Vaporization
Laser pulses

A transport phenomena based model to prevent liquation cracking in aluminum alloy welds

Mishra, S., Chakraborty, S. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 35-40 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum alloys
Welds
Solute transport
Solidification
Metals

Ferrite formation in a duplex stainless steel during controlled heating: X-ray diffraction and modeling using para-equilibrium diffusion kinetics

Zhang, W., Palmer, T., Elmer, J. W. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 939-944 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Ferrite
Stainless steel
Heating
X ray diffraction

Genetic algorithm based optimization of Johnson Mehl Avrami equation parameters for ferrite to austenite transformation in steel welds

Mishra, S., Kumar, A., Debroy, T. & Elmer, J. W., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 1001-1006 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Austenite
Ferrite
Welds
Nucleation

Reliable modeling of heat and fluid flow in gas-metal-arc fillet welds through optimization of uncertain variables

Kumar, A. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 85-90 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow of fluids
Welds
Heat transfer
Thermal conductivity
Welding

Transport phenomena and genetic algorithm based window of welding variables to achieve a target gas metal arc fillet weld geometry

Kumar, A. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 91-96 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Welds
Genetic algorithms
Geometry
Flow of fluids
2002

ASM Procerdings of the International Conference: Trends in Welding Research: Preface

David, S. A., Debroy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M., 2002, ASM Proceedings of the International Conference: Trends in Welding Research. David, S. A., DebRoy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M. (eds.).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding

Computer Modeling of Keyhole Mode Laser Welding To Avoid Maencecro-porosity

Zhao, H. & Debroy, T., 2002, ASM Proceedings of the International Conference: Trends in Welding Research. David, S. A., DebRoy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M. (eds.). p. 118-123 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser beam welding
Laser modes
Welding
Porosity
Macros
1998

A quantitative analysis of the microstructures developed in an HSLA 100 weld metal

Ryder, J. M., Yang, Z., Debroy, T. & Howell, P. R., Dec 1 1998, Analysis of In-Service Failures and Advances in Microstructural Characterization. Abramovici, E., Northwood, D. O., Shehata, M. T., Wylie, J., Northwood, D. O., Abramovici, E., Shehata, M. T. & Wylie, J. (eds.). p. 313-320 8 p. (Microstructural Science; vol. 26).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bainite
Ferrite
Welds
Microstructure
Metals

ASM Proceedings of the International Conference: Trends in Welding Research: Forward

Vitek, J. M., David, S. A., Johnson, J. A., Smartt, H. B. & Debroy, T., 1998, ASM Proceedings of the International Conference: Trends in Welding Research. Vitek, J. M., David, S. A., Johnson, J. A., Smartt, H. B. & DebRoy, T. (eds.).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
1 Citation (Scopus)

Inclusion Formation in Low-Alloy Steel Welds

Babu, S. S., David, S. A. & Debroy, T., 1998, ASM Proceedings of the International Conference: Trends in Welding Research. Vitek, J. M., David, S. A., Johnson, J. A., Smartt, H. B. & DebRoy, T. (eds.). p. 179-184 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Welds
Thermodynamics
Composition effects
Kinetics
1987

EMISSION SPECTROSCOPIC STUDIES OF THE PLASMA DURING LASER BEAM WELDING.

Collur, M. M. & Debroy, T., 1987, Unknown Host Publication Title. AWS, p. 123-124 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser beam welding
Vaporization
Plasmas
Plasma welding
Emission spectroscopy
1986
14 Citations (Scopus)

HEAT TRANSFER AND FLUID FLOW IN LASER MELTED WELD POOLS.

Paul, A. & Debroy, T., Dec 1 1986, Unknown Host Publication Title. David, S. A. (ed.). ASM Int, p. 29-33 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow of fluids
Welds
Heat transfer
Lasers
Sulfur
1985

DETERMINATION OF WELD POOL TEMPERATURE DURING LASER WELDING OF AISI 202 STAINLESS STEEL.

Khan, P. A. A. & Debroy, T., Dec 1 1985, Unknown Host Publication Title. Metallurgical Soc of AIME, p. 71-81 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser beam welding
Welds
Vaporization
Stainless steel
Chemical analysis
1982

HIGH TEMPERATURE OXIDATION OF NICKEL AND A NICKEL ALLOY.

Shahapurkar, D., Debroy, T. & Simkovich, G., 1982, Unknown Host Publication Title. Metall Soc of AIME (Metall Textb Ser), p. 63-68 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermooxidation
Nickel alloys
Nickel

RETORTING OF ZINC.

Debroy, T., Shahapurkar, D. & Healy, G. W., 1982, Unknown Host Publication Title. Metall Soc of AIME (Metall Textb Ser), p. 73-81 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zinc