Timothy William Simpson, PhD

    • 15212 Citations
    • 52 h-Index
    19952020

    Research output per year

    If you made any changes in Pure these will be visible here soon.

    Research Output

    Filter
    Conference contribution
    2019

    A comparative study of virtual reality and computer-aided design to evaluate parts for additive manufacturing

    Ostrander, J. K., Ryan, L., Dhengre, S., McComb, C., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    But will it print? Assessing student use of design for additive manufacturing and exploring its effect on design performance and manufacturability

    Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Complex solutions for complex problems? Exploring the effects of task complexity on student use of design for additive manufacturing and creativity

    Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., 2019, 21st International Conference on Advanced Vehicle Technologies; 16th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Deep reinforcement learning for transfer of control policies

    Cunningham, J. D., Miller, S. W., Yukish, M. A., Simpson, T. W. & Tucker, C. S., Jan 1 2019, 45th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2019).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2018

    A physics-based virtual environment for enhancing the quality of deep generative designs

    Dering, M., Cunningham, J., Desai, R., Simpson, T. W., Yukish, M. A. & Tucker, C. S., Jan 1 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Change propagation during prototyping: A case study of a robotic inspection system for dry nuclear waste storage casks

    Bracken, J., Brennan, S., Lissenden, C., Simpson, T. W., Van Sant, I., Reichard, K. & Ng, M., Jan 1 2018, 30th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations

    Evaluating the effectiveness of Virtual reality as an interactive educational resource for additive manufacturing

    Ostrander, J. K., Tucker, C. S., Simpson, T. W. & Meisel, N. A., 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Product family redesign using additive manufacturing

    Jung, S. & Simpson, T. W., Jan 1 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Teaching design freedom: Exploring the effects of design for additive manufacturing education on the cognitive components of students’ creativity

    Prabhu, R., Miller, S. R., Simpson, T. W. & Meisel, N. A., 2018, 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Scopus citations

    The earlier the better? Investigating the importance of timing on effectiveness of design for additive manufacturing education

    Prabhu, R., Simpson, T. W., Miller, S. R. & Meisel, N. A., 2018, 44th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
    2017

    A framework for the design and optimization of self-folding structures

    Bowen, L., Frecker, M., Simpson, T. W. & Strzelec, R., Jan 1 2017, 41st Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    An investigation into the driving factors of creativity in design for additive manufacturing

    Barclift, M., Simpson, T. W., Nusiner, M. A. & Miller, S. R., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    CAD-Integrated cost estimation and build orientation optimization to support design for metal additive manufacturing

    Barclift, M., Armstrong, A., Simpson, T. W. & Joshi, S. B., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations

    Development of cad-integrated cost estimator to support design for additive manufacturing

    Armstrong, A. P., Barclift, M. & Simpson, T. W., Jan 1 2017, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 68330. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations

    Education readiness levels (ERLS): A scale for assessing educational coursework and training modules

    Dinda, S., Simpson, T. W. & Gluck, L., Jan 1 2017, 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Evaluating the discriminatory value and reliability of ideation metrics for their application to concept development and prototyping

    Menold, J., Simpson, T., Jablokow, K. & Suero, R., Jan 1 2017, 29th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Expediting build time, material, and cost estimation for material extrusion processes to enable mobile applications

    Dinda, S., Modi, D., Simpson, T. W., Tedia, S. & Williams, C. B., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations

    Experimental comparison of a traditionally built versus additively manufactured aircraft heat exchanger

    Saltzman, D., Bichnevicius, M., Lynch, S., Simpson, T. W., Reutzel, E. W., Dickman, C. & Martukanitz, R., Jan 1 2017, AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., AIAA 2017-0902. (AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Multi-level value-driven design approaches for product family design

    Jung, S., Simpson, T. W. & Bloebaum, C., 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Product family and product platform benchmarking with commonality and variety indices

    Simpson, T. W., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), Vol. 2B-2017.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations

    Two applications of design as a sequential decision process

    Miller, S. W., Simpson, T. W. & Yukish, M. A., Jan 1 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations

    Value-driven design using discipline-based decomposition for a family of front-loading washing machines

    Jung, S., Simpson, T. W. & Bloebaum, C., 2017, 43rd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
    2016

    Application of topology optimization and design for additive manufacturing guidelines on an automotive component

    Reddy, S. N., Maranan, V., Simpson, T. W., Palmer, T. & Dickman, C. J., 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    14 Scopus citations

    A value-driven design approach to optimize a family of front-loading washing machines

    Jung, S., Simpson, T. W., Bloebaum, C., Kannan, H., Winer, E. & Mesmer, B., 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations

    Design, fabrication, and modeling of an electric-magnetic self-folding sheet

    Bowen, L., Springsteen, K., Ahmed, S., Arrojado, E., Frecker, M. & Simpson, T. W., Jan 1 2016, 40th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Dynamic modeling and analysis of an origami-inspired optical shield for the starshade spacecraft

    Bowen, L., Trease, B., Frecker, M. & Simpson, T., Jan 1 2016, Multifunctional Materials; Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Structural Health Monitoring. American Society of Mechanical Engineers, V001T01A012. (ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2016; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations

    Multidisciplinary analysis and product family optimization of front-loading washing machines

    Jung, S. & Simpson, T. W., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations

    Ontology-based laser and thermal metamodels for metal-based additive manufacturing

    Roh, B. M., Kumara, S. R. T., Simpson, T. W., Michaleris, P., Witherell, P. & Assouroko, I., 2016, 36th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations

    Problem discovery with many-objective visual analytics

    Woodruff, M. & Simpson, T. W., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Problem exploration with many-objective visual analytics

    Woodruff, M. & Simpson, T. W., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Quantifying the shape of a pareto front in support of many-objective trade space exploration

    Unal, M., Warn, G. P. & Simpson, T. W., 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Redesigning a reaction control thruster for metal-based additive manufacturing: A case study in design for additive manufacturing

    Woods, M. R., Meisel, N. A., Simpson, T. W. & Dickman, C. J., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    The Prototype for X (PFX) framework: Assessing the impact of PFX on desirability, feasibility, and viability of end designs

    Menold, J., Simpson, T. W. & Jablokow, K. W., Jan 1 2016, 28th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    19 Scopus citations

    Topology optimization software for additive manufacturing: A review of current capabilities and a real-world example

    Reddy, S. N., Ferguson, I., Frecker, M., Simpson, T. W. & Dickman, C. J., 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    13 Scopus citations

    Using rapid manufacturability analysis tools to enhance design-for-manufacturing training in engineering education

    Lynn, R., Jablokow, K., Reddy, N., Saldana, C., Tucker, T., Simpson, T. W., Kurfess, T. & Williams, C., 2016, 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Scopus citations
    2015

    Advancing the additive manufacturing workforce: Summary and recommendations from a NSF workshop

    Williams, C. B., Simpson, T. W. & Hripko, M., Jan 1 2015, 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations

    An integrated approach to product family Redesign using commonality and variety metrics

    Jung, S. & Simpson, T. W., 2015, 41st Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations

    Considering mechanical advantage in the design and actuation of an origami-based mechanism

    Wilcox, E. W., Shrager, A., Bowen, L., Frecker, M., Von Lockette, P., Simpson, T., Magleby, S., Lang, R. J. & Howell, L. L., Jan 1 2015, 39th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations

    Design as a sequential decision process: A method for reducing design set space using models to bound objectives

    Miller, S. W., Simpson, T. W. & Yukish, M. A., Jan 1 2015, 41st Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Scopus citations

    Introduction of a tradeoff index for efficient trade space exploration

    Unal, M., Warn, G. & Simpson, T. W., 2015, 41st Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations

    Multi-objective evolutionary algorithms' performance in a support role

    Woodruff, M. J., Simpson, T. W. & Reed, P. M., Jan 1 2015, 41st Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations

    Optimization of a dynamic model of magnetic actuation of an origami mechanism

    Bowen, L., Springsteen, K., Frecker, M. & Simpson, T., Jan 1 2015, 39th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
    2014

    A Dynamic Model of magneto-active elastomer actuation of the waterbomb base

    Bowen, L., Frecker, M., Simpson, T. W. & Von Lockette, P., Jan 1 2014, 38th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations

    Bistable compliant mechanism using magneto active elastomer actuation

    Crivaro, A., Sheridan, R., Frecker, M., Simpson, T. W. & Von Lockette, P., Jan 1 2014, 38th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations

    Differentiating bending from folding in origami engineering using active materials

    Lauff, C., Simpson, T. W., Frecker, M. I., Ounaies, Z., Ahmed, S., Von Lockette, P. R., Strzelec, R. A., Sheridan, R. & Lien, J. M., Jan 1 2014, 38th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    12 Scopus citations

    Effects of over-the-counter medication product family packaging design on knowledge acquisition and consumer preferences

    Cho, J., Miller, S. R., Simpson, T. W. & Shooter, S. B., Jan 1 2014, 2nd Biennial International Conference on Dynamics for Design; 26th International Conference on Design Theory and Methodology. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations

    Many-objective visual analytics: In search of search-as-a-service

    Woodruff, M., Simpson, T. W., Hadka, D. & Reed, P., 2014, AIAA AVIATION 2014 -15th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. American Institute of Aeronautics and Astronautics Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Toward a value-driven design approach for complex engineered systems using trade space exploration tools

    Miller, S. W., Simpson, T. W., Yukish, M. A., Stump, G., Mesmer, B. L., Tibor, E. B., Bloebaum, C. L. & Winer, E. H., 2014, 40th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    8 Scopus citations

    Toward metamodels for composable and reusable additive manufacturing process models

    Witherell, P., Feng, S. C., Martukanitz, R., Simpson, T. W., John, D. B. S., Michaleris, P., Liu, Z. & Chen, L., Jan 1 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations

    Using interfaces to drive module definition: Investigating the impact of a new design dependency measure

    Jung, S., Simpson, T. W. & Asikoglu, O., 2014, 40th Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations