• 2886 Citations
  • 28 h-Index
19962019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2019

Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys

Zuback, J. S., Palmer, T. A. & DebRoy, T., Jan 5 2019, In : Journal of Alloys and Compounds. 770, p. 995-1003 9 p.

Research output: Contribution to journalArticle

9 Scopus citations

Directed energy deposition of molybdenum

Johnson, J. L. & Palmer, T., Nov 1 2019, In : International Journal of Refractory Metals and Hard Materials. 84, 105029.

Research output: Contribution to journalArticle

Impact of chemical composition on precipitate morphology in an additively manufactured nickel base superalloy

Zuback, J. S., Moradifar, P., Khayat, Z., Alem, N. & Palmer, T. A., Aug 25 2019, In : Journal of Alloys and Compounds. 798, p. 446-457 12 p.

Research output: Contribution to journalArticle

3 Scopus citations

Ni-Concentration Dependence of Directed Energy Deposited NiTi Alloy Microstructures

Bimber, B. A., Hamilton, R. F. & Palmer, T. A., Jun 15 2019, In : Shape Memory and Superelasticity. 5, 2, p. 182-187 6 p.

Research output: Contribution to journalArticle

1 Scopus citations
3 Scopus citations

The effect of immersion time on the electrochemical characterization of additively manufactured 316L stainless steel exposed to artificial seawater

Shaw, B., Sikora, E., Wang, D., Palmer, T. & Kadhi, M. S. A., Jan 1 2019, Materials Science and Technology 2018, MS and T 2018. Association for Iron and Steel Technology, AISTECH, p. 721-728 8 p. (Materials Science and Technology 2018, MS and T 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength

Brown, D. W., Adams, D. P., Balogh, L., Carpenter, J. S., Clausen, B., Livescu, V., Martinez, R. M., Morrow, B. M., Palmer, T. A., Pokharel, R., Strantza, M. & Vogel, S. C., Jul 15 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 7, p. 3399-3413 15 p.

Research output: Contribution to journalArticle

1 Scopus citations
2018
9 Scopus citations

Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel

Meredith, S. D., Zuback, J. S., Keist, J. S. & Palmer, T. A., Dec 19 2018, In : Materials Science and Engineering A. 738, p. 44-56 13 p.

Research output: Contribution to journalArticle

10 Scopus citations
7 Scopus citations
6 Scopus citations
2017

Building blocks for a digital twin of additive manufacturing

Knapp, G. L., Mukherjee, T., Zuback, J. S., Wei, H. L., Palmer, T. A., De, A. & DebRoy, T., Aug 15 2017, In : Acta Materialia. 135, p. 390-399 10 p.

Research output: Contribution to journalArticle

45 Scopus citations

Comparative shock response of additively manufactured versus conventionally wrought 304L stainless steel

Wise, J. L., Adams, D. P., Nishida, E. E., Song, B., Maguire, M. C., Carroll, J., Reedlunn, B., Bishop, J. E. & Palmer, T. A., Jan 13 2017, Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Ravelo, R., Sewell, T., Chau, R., Germann, T., Oleynik, I. I. & Peiris, S. (eds.). American Institute of Physics Inc., 100015. (AIP Conference Proceedings; vol. 1793).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Compressive and Tensile Stress–Strain Responses of Additively Manufactured (AM) 304L Stainless Steel at High Strain Rates

Song, B., Nishida, E., Sanborn, B., Maguire, M., Adams, D., Carroll, J., Wise, J., Reedlunn, B., Bishop, J. & Palmer, T., Sep 1 2017, In : Journal of Dynamic Behavior of Materials. 3, 3, p. 412-425 14 p.

Research output: Contribution to journalArticle

6 Scopus citations
21 Scopus citations

Fixturing effects in the thermal modeling of laser cladding

Gouge, M. F., Michaleris, P. & Palmer, T. A., Jan 1 2017, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 139, 1, 011001.

Research output: Contribution to journalArticle

9 Scopus citations
9 Scopus citations

In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel

Brown, D. W., Adams, D. P., Balogh, L., Carpenter, J. S., Clausen, B., King, G., Reedlunn, B., Palmer, T., Maguire, M. C. & Vogel, S. C., Dec 1 2017, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 12, p. 6055-6069 15 p.

Research output: Contribution to journalArticle

19 Scopus citations

Special Focus on Metal Additive Manufacturing

Jodoin, B., Brochu, M., Hascoet, J. Y. & Palmer, T., Apr 1 2017, In : Journal of Thermal Spray Technology. 26, 4, 1 p.

Research output: Contribution to journalEditorial

2 Scopus citations
2016

Additive manufacturing of magnesium alloy powders: Investigations into process development using elektron®MAP+43 via laser powder bed fusion and directed energy deposition

Tandon, R., Palmer, T., Gieseke, M., Noelke, C. & Kaierle, S., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA), (World PM 2016 Congress and Exhibition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
29 Scopus citations

Application of topology optimization and design for additive manufacturing guidelines on an automotive component

Reddy, S. N., Maranan, V., Simpson, T. W., Palmer, T. & Dickman, C. J., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Scopus citations
180 Scopus citations
10 Scopus citations

Porosity in thick section alloy 690 welds - Experiments, modeling, mechanism, and remedy

Blecher, J. J., Palmer, T. & Debroy, T., Jan 1 2016, In : Welding Journal. 95, 1, p. 17s-26s

Research output: Contribution to journalArticle

6 Scopus citations
42 Scopus citations

Role of processing-structure-property relationships in developing certification protocols for Ti-6Al-4V components

Palmer, T., 2016, "Advances in Technology to Support End User Mission" - Proceedings of the 2016 Joint Conference/Symposium of the Society for Machinery Failure Prevention Technology and the International Society of Automation. Society for Machinery Failure Prevention Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Selection of powder or wire feedstock material for the laser cladding of Inconel® 625

Heigel, J. C., Gouge, M. F., Michaleris, P. & Palmer, T. A., May 1 2016, In : Journal of Materials Processing Technology. 231, p. 357-365 9 p.

Research output: Contribution to journalArticle

35 Scopus citations

Target shape optimization of functionally graded shape memory alloy compliant mechanism

Jovanova, J., Frecker, M., Hamilton, R. F. & Palmer, T. A., Jan 1 2016, Modeling, Simulation and Control; Bio-Inspired Smart Materials and Systems; Energy Harvesting. American Society of Mechanical Engineers, V002T03A006. (ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2016; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations
2015

Additive manufacturing of electron® 43 alloy using laser powder bed and directed energy deposition

Tandon, R., Wilks, T., Gieseke, D. I. M., Noelke, D. I. C., Kaierle, S. & Palmer, T., Jan 1 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), (Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing

Carroll, B. E., Palmer, T. & Beese, A. M., Apr 1 2015, In : Acta Materialia. 87, p. 309-320 12 p.

Research output: Contribution to journalArticle

325 Scopus citations

Dynamic compressive response of wrought and additive manufactured 304L stainless steels

Nishida, E., Song, B., Maguire, M., Adams, D., Carroll, J., Wise, J., Bishop, J. & Palmer, T., Sep 7 2015, DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading. Cadoni, E. (ed.). EDP Sciences, 01001. (EPJ Web of Conferences; vol. 94).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys

Denlinger, E. R., Heigel, J. C., Michaleris, P. & Palmer, T. A., Jan 2015, In : Journal of Materials Processing Technology. 215, p. 123-131 9 p.

Research output: Contribution to journalArticle

129 Scopus citations

Employing microsecond pulses to form laser-fired contacts in photovoltaic devices

Raghavan, A. S., Palmer, T. A., Kragh-Buetow, K. C., Domask, A. C., Reutzel, E. W., Mohney, S. E. & DebRoy, T., Aug 1 2015, In : Progress in Photovoltaics: Research and Applications. 23, 8, p. 1025-1036 12 p.

Research output: Contribution to journalArticle

3 Scopus citations

Fusion zone microstructure and geometry in complete-joint-penetration laser-arc hybrid welding of low-alloy steel

Wei, H. L., Blecher, J. J., Palmer, T. & Debroy, T., Apr 1 2015, In : Welding Journal. 94, 4, p. 135s-144s

Research output: Contribution to journalArticle

14 Scopus citations

In situ monitoring and characterization of distortion during laser cladding of Inconel® 625

Heigel, J. C., Michaleris, P. & Palmer, T. A., Jun 2015, In : Journal of Materials Processing Technology. 220, p. 135-145 11 p.

Research output: Contribution to journalArticle

51 Scopus citations
22 Scopus citations

Modeling forced convection in the thermal simulation of laser cladding processes

Gouge, M. F., Heigel, J. C., Michaleris, P. & Palmer, T. A., Jul 28 2015, In : International Journal of Advanced Manufacturing Technology. 79, 1-4, p. 307-320 14 p.

Research output: Contribution to journalArticle

50 Scopus citations
26 Scopus citations
2014

Introduction

Palmer, T., Günster, J. & Günther, D., Jun 17 2014, In : Journal of Materials Research. 29, 17, 1 p.

Research output: Contribution to journalEditorial

Passivation layer breakdown during laser-fired contact formation for photovoltaic devices

Raghavan, A., Palmer, T. & Debroy, T., Jan 1 2014, In : Applied Physics Letters. 105, 2, 024105.

Research output: Contribution to journalArticle

2 Scopus citations

Real time monitoring of laser beam welding keyhole depth by laser interferometry

Blecher, J. J., Galbraith, C. M., Van Vlack, C., Palmer, T., Fraser, J. M., Webster, P. J. & Debroy, T., Oct 1 2014, In : Science and Technology of Welding and Joining. 19, 7, p. 560-564 5 p.

Research output: Contribution to journalArticle

15 Scopus citations

Solidification map of a nickel-base alloy

Blecher, J. J., Palmer, T. & Debroy, T., Jan 1 2014, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 4, p. 2142-2151 10 p.

Research output: Contribution to journalArticle

35 Scopus citations

Toward an integrated computational system for describing the additive manufacturing process for metallic materials

Martukanitz, R., Michaleris, P., Palmer, T., DebRoy, T., Liu, Z. K., Otis, R., Heo, T. W. & Chen, L. Q., Oct 1 2014, In : Additive Manufacturing. 1, p. 52-63 12 p.

Research output: Contribution to journalArticle

59 Scopus citations
2013

Capillary wicking of liquid lithium on laser textured surfaces for plasma facing components

Lin, T. F., Palmer, T., Meinert, Jr., K. C., Murray, N. R. & Majeski, R., Jan 1 2013, In : Journal of Nuclear Materials. 433, 1-3, p. 55-65 11 p.

Research output: Contribution to journalArticle

9 Scopus citations

Dynamics of microscale thin film AlN piezoelectric resonators enables low phase noise UHF frequency sources

Piazza, G., Tazzoli, A., Miller, N., Segovia, J., Cassella, C., Koo, J., Otis, B., McNaul, K., Gibson, B., Turner, K. & Palmer, T., Dec 1 2013, 2013 Joint European Frequency and Time Forum and International Frequency Control Symposium, EFTF/IFC 2013. p. 555-558 4 p. 6702291. (2013 Joint European Frequency and Time Forum and International Frequency Control Symposium, EFTF/IFC 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Heat transfer and fluid flow in additive manufacturing

Raghavan, A., Wei, H. L., Palmer, T. A. & Debroy, T., Nov 1 2013, In : Journal of Laser Applications. 25, 5, 052006.

Research output: Contribution to journalArticle

47 Scopus citations

High power laser characterization using beam diagnostics

Blecher, J. J., Palmer, T. & Kelly, S. M., 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 55-59 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical modeling of laser micro-welding for photovoltaic devices

Raghavan, A., Palmer, T. A. & DebRoy, T., Jul 31 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 635-640 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research).

Research output: Chapter in Book/Report/Conference proceedingConference contribution