• 2591 Citations
  • 27 h-Index
19962019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1996 2019

1 Citation (Scopus)

Additive manufacturing of electron® 43 alloy using laser powder bed and directed energy deposition

Tandon, R., Wilks, T., Gieseke, D. I. M., Noelke, D. I. C., Kaierle, S. & Palmer, T., Jan 1 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Powders
beds
manufacturing
Electrons
5 Citations (Scopus)

Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys

Zuback, J. S., Palmer, T. & Debroy, T., Jan 5 2019, In : Journal of Alloys and Compounds. 770, p. 995-1003 9 p.

Research output: Contribution to journalArticle

3D printers
Carbon
Dissimilar metals
Welds
Microstructure

Additive manufacturing of magnesium alloy powders: Investigations into process development using elektron®MAP+43 via laser powder bed fusion and directed energy deposition

Tandon, R., Palmer, T., Gieseke, M., Noelke, C. & Kaierle, S., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA), (World PM 2016 Congress and Exhibition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Magnesium alloys
Powders
Fusion reactions
Lasers
3 Citations (Scopus)

Advanced techniques for in-situ monitoring of phase transformations during welding using synchrotron-based x-ray diffraction

Elmer, J. W., Palmer, T., Zhang, W. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 901-910 10 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchrotrons
Welding
Diffraction
Phase transitions
X rays
26 Citations (Scopus)
phase transformations
Precipitates
precipitates
microstructure
Microstructure
268 Citations (Scopus)

Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing

Carroll, B. E., Palmer, T. & Beese, A. M., Apr 1 2015, In : Acta Materialia. 87, p. 309-320 12 p.

Research output: Contribution to journalArticle

3D printers
Ductility
Mechanical properties
Oxygen
Yield stress
8 Citations (Scopus)

Application of topology optimization and design for additive manufacturing guidelines on an automotive component

Reddy, S. N., Maranan, V., Simpson, T. W., Palmer, T. & Dickman, C. J., Jan 1 2016, 42nd Design Automation Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Topology Optimization
Shape optimization
Manufacturing
Costs
5 Citations (Scopus)

Arc-laser interactions and heat transfer and fluid flow in hybrid welding

Ribic, B. D., Rai, R., Palmer, T. & Debroy, T., Dec 1 2009, Trends in Welding Research - Proceedings of the 8th International Conference. p. 313-320 8 p. (ASM Proceedings of the International Conference: Trends in Welding Research).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow of fluids
Welding
Heat transfer
Welds
Lasers

ASM Conference Proceedings: Joining of Advanced and Specialty Materials: Preface

Lienert, T. J., Acoff, V., Palmer, T., Hochanadel, P. W., Katayama, S., Indacochea, J. E., Lienert, T. J., Weil, K. S., Zhou, Y. N., Smith, R. W. & Powers, M., Dec 1 2005, In : ASM Conference Proceedings: Joining of Advanced and Specialty Materials.

Research output: Contribution to journalEditorial

Joining
37 Citations (Scopus)

Building blocks for a digital twin of additive manufacturing

Knapp, G. L., Mukherjee, T., Zuback, J. S., Wei, H. L., Palmer, T., De, A. & Debroy, T., Aug 15 2017, In : Acta Materialia. 135, p. 390-399 10 p.

Research output: Contribution to journalArticle

3D printers
Dendrites (metallography)
Solidification
Deposits
Cooling
8 Citations (Scopus)

Capillary wicking of liquid lithium on laser textured surfaces for plasma facing components

Lin, T. F., Palmer, T., Meinert, Jr., K. C., Murray, N. R. & Majeski, R., Jan 1 2013, In : Journal of Nuclear Materials. 433, 1-3, p. 55-65 11 p.

Research output: Contribution to journalArticle

liquid lithium
Lithium
Plasmas
lithium
2-Propanol

Challenges in the design of portable laser repair systems

Nissly, A., Reutzel, E. & Palmer, T., Dec 1 2012, p. 502-508. 7 p.

Research output: Contribution to conferencePaper

Laser safety
Robotics
Repair
Wire
Lasers
10 Citations (Scopus)
Electron beams
Welds
electron beams
Optics
radiant flux density
2 Citations (Scopus)

Characterization and prediction of austenite formation and decomposition in steel welds

Babu, S. S., Vitek, J. M., David, S. A., Palmer, T. & Elmer, J. W., 2003, A Symposium on the Thermodynamics, kinetics, Characterizaion and Modeling of: Austenite Formation and Decomposition. Damm, E. B. & Merwin, M. J. (eds.). p. 343-352 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Austenite
Welds
Decomposition
Heat affected zone
1 Citation (Scopus)

Characterization of low temperature ferrite/austenite transformations in the heat affected zone of 2205 duplex stainless steel arc welds

Palmer, T., Elmer, J. W., Babu, S. S. & Vitek, J. M., Dec 1 2003, A Symposium on the Thermodynamics, kinetics, Characterizaion and Modeling of: Austenite Formation and Decomposition. Damm, E. B. & Merwin, M. J. (eds.). p. 177-192 16 p. (Materials Science and Technology 2003 Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Heat affected zone
Austenite
Ferrite
Welds
2 Citations (Scopus)

Comparative shock response of additively manufactured versus conventionally wrought 304L stainless steel

Wise, J. L., Adams, D. P., Nishida, E. E., Song, B., Maguire, M. C., Carroll, J., Reedlunn, B., Bishop, J. E. & Palmer, T., Jan 13 2017, Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Ravelo, R., Sewell, T., Chau, R., Germann, T., Oleynik, I. I. & Peiris, S. (eds.). American Institute of Physics Inc., 100015. (AIP Conference Proceedings; vol. 1793).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

stainless steels
Hugoniot equation of state
shock
gas guns
axial strain
5 Citations (Scopus)

Compressive and Tensile Stress–Strain Responses of Additively Manufactured (AM) 304L Stainless Steel at High Strain Rates

Song, B., Nishida, E., Sanborn, B., Maguire, M., Adams, D., Carroll, J., Wise, J., Reedlunn, B., Bishop, J. & Palmer, T., Sep 1 2017, In : Journal of Dynamic Behavior of Materials. 3, 3, p. 412-425 14 p.

Research output: Contribution to journalArticle

Stainless Steel
Strain rate
Stainless steel
Yield stress
Plastic flow
7 Citations (Scopus)
Precipitates
Microstructure
Shape memory effect
Austenite
3D printers
15 Citations (Scopus)

Development of an explosive welding process for producing high-strength welds between niobium and 6061-T651 aluminum

Palmer, T., Elmer, J. W., Brasher, D., Butler, D. & Riddle, R., Nov 1 2006, In : Welding Journal (Miami, Fla). 85, 11

Research output: Contribution to journalArticle

Niobium
Explosive welding
Aluminum
Welds
Impact strength
17 Citations (Scopus)
titanium alloys
Titanium alloys
Microhardness
microhardness
hardness

Directed energy deposition of molybdenum

Johnson, J. L. & Palmer, T., Nov 1 2019, In : International Journal of Refractory Metals and Hard Materials. 84, 105029.

Research output: Contribution to journalArticle

Molybdenum
Substrates
Molybdenum deposits
3D printers
Lasers
3 Citations (Scopus)

Direct observation of austenitisation in 1005 C-Mn steel during continuous heating using in situ synchrotron X-ray diffraction

Palmer, T., Elmer, J. W., Mayr, P. & Specht, E. D., Jul 1 2011, In : Science and Technology of Welding and Joining. 16, 5, p. 377-384 8 p.

Research output: Contribution to journalArticle

Steel
Synchrotrons
synchrotrons
steels
Heating
10 Citations (Scopus)

Direct observation of phase transformations in the simulated heat-affected zone of a 9Cr martensitic steel

Mayr, P., Palmer, T., Elmer, J. W. & Specht, E. D., Apr 1 2008, In : Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 381-386 6 p.

Research output: Contribution to journalArticle

Martensitic steel
heat affected zone
Heat affected zone
phase transformations
Phase transitions
41 Citations (Scopus)
Bainite
Steel
Electric arc welding
Martensite
Austenite
16 Citations (Scopus)

Direct observations of rapid diffusion of Cu in Au thin films using in situ x-ray diffraction

Elmer, J. W., Palmer, T. & Specht, E. D., Jul 1 2006, In : Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 24, 4, p. 978-987 10 p., 102604JVA.

Research output: Contribution to journalArticle

x ray diffraction
Diffraction
X rays
Thin films
thin films
84 Citations (Scopus)
Stainless Steel
Synchrotrons
stainless steels
synchrotrons
Stainless steel

Direct observations of sigma phase growth and dissolution in 2205 duplex stainless steel

Palmer, T., Elmer, J. W., Babu, S. S. & Specht, E. D., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 945-950 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Volume fraction
Dissolution
Stainless steel
Heat treatment
17 Citations (Scopus)

Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld

Palmer, T. & Elmer, J. W., Sep 1 2005, In : Scripta Materialia. 53, 5, p. 535-540 6 p.

Research output: Contribution to journalArticle

pearlite
Pearlite
Steel
austenite
Austenite
11 Citations (Scopus)
heat affected zone
Steel
Heat affected zone
austenite
Austenite
4 Citations (Scopus)

Dynamic compressive response of wrought and additive manufactured 304L stainless steels

Nishida, E., Song, B., Maguire, M., Adams, D., Carroll, J., Wise, J., Bishop, J. & Palmer, T., Sep 7 2015, DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading. Cadoni, E. (ed.). EDP Sciences, 01001. (EPJ Web of Conferences; vol. 94).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

stainless steels
manufacturing
tooling
strain rate
residual stress
6 Citations (Scopus)

Dynamics of microscale thin film AlN piezoelectric resonators enables low phase noise UHF frequency sources

Piazza, G., Tazzoli, A., Miller, N., Segovia, J., Cassella, C., Koo, J., Otis, B., McNaul, K., Gibson, B., Turner, K. & Palmer, T., Dec 1 2013, 2013 Joint European Frequency and Time Forum and International Frequency Control Symposium, EFTF/IFC 2013. p. 555-558 4 p. 6702291. (2013 Joint European Frequency and Time Forum and International Frequency Control Symposium, EFTF/IFC 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum nitride
Phase noise
MEMS
Resonators
Thin films
106 Citations (Scopus)

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys

Denlinger, E. R., Heigel, J. C., Michaleris, P. & Palmer, T., Jan 1 2015, In : Journal of Materials Processing Technology. 215, p. 123-131 9 p.

Research output: Contribution to journalArticle

3D printers
Nickel alloys
Titanium alloys
Residual stresses
Lasers
135 Citations (Scopus)
3D printers
Austenitic stainless steel
Tensile properties
Microstructure
Processing
3 Citations (Scopus)

Employing microsecond pulses to form laser-fired contacts in photovoltaic devices

Raghavan, A. S., Palmer, T., Kragh-Buetow, K. C., Domask, A. C., Reutzel, E. W., Mohney, S. E. & Debroy, T., Aug 1 2015, In : Progress in Photovoltaics: Research and Applications. 23, 8, p. 1025-1036 12 p.

Research output: Contribution to journalArticle

Laser pulses
Aluminum
Lasers
pulses
lasers
22 Citations (Scopus)

Enhanced dissolution of nitrogen during gas tungsten arc welding of steels

Palmer, T. & Debroy, T., Jan 1 1998, In : Science and Technology of Welding and Joining. 3, 4, p. 190-203 14 p.

Research output: Contribution to journalArticle

gas tungsten arc welding
Tungsten
Steel
Electric arc welding
dissolving
1 Citation (Scopus)
Steel
Heat affected zone
Welds
Phase transitions
Kinetics
10 Citations (Scopus)

Evolution of laser-fired aluminum-silicon contact geometry in photovoltaic devices

Raghavan, A., Palmer, T. & Debroy, T., Jan 15 2012, In : Journal of Applied Physics. 111, 2, 024903.

Research output: Contribution to journalArticle

aluminum
silicon
geometry
lasers
solar cells

Ferrite formation in a duplex stainless steel during controlled heating: X-ray diffraction and modeling using para-equilibrium diffusion kinetics

Zhang, W., Palmer, T., Elmer, J. W. & Debroy, T., Dec 1 2005, Trends in Welding Research - Proceedings of the 7th International Conference. Vol. 2005. p. 939-944 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Ferrite
Stainless steel
Heating
X ray diffraction
9 Citations (Scopus)

Fixturing effects in the thermal modeling of laser cladding

Gouge, M. F., Michaleris, P. & Palmer, T., Jan 1 2017, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 139, 1, 011001.

Research output: Contribution to journalArticle

Laser cladding
Substrates
Surface roughness
Hot Temperature
Experiments
16 Citations (Scopus)

Formation of delta ferrite in 9 Wt Pct Cr steel investigated by in-situ x-ray diffraction using synchrotron radiation

Mayr, P., Palmer, T. A., Elmer, J. W., Specht, E. D. & Allen, S. M., Oct 1 2010, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 10, p. 2462-2465 4 p.

Research output: Contribution to journalArticle

Steel
Synchrotron radiation
carbides
Ferrite
ferrites
13 Citations (Scopus)

Fusion zone microstructure and geometry in complete-joint-penetration laser-arc hybrid welding of low-alloy steel

Wei, H. L., Blecher, J. J., Palmer, T. & Debroy, T., Apr 1 2015, In : Welding Journal. 94, 4, p. 135s-144s

Research output: Contribution to journalArticle

High strength steel
Welding
Fusion reactions
Microstructure
Geometry
61 Citations (Scopus)

Heat transfer and fluid flow during electron beam welding of 304L stainless steel alloy

Rai, R., Palmer, T., Elmer, J. W. & Debroy, T., Mar 1 2009, In : Welding Journal (Miami, Fla). 88, 3

Research output: Contribution to journalArticle

Electron beam welding
Stainless Steel
Alloy steel
Flow of fluids
Welds
183 Citations (Scopus)

Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium

Rai, R., Elmer, J. W., Palmer, T. & Debroy, T., Sep 21 2007, In : Journal of Physics D: Applied Physics. 40, 18, p. 5753-5766 14 p., 037.

Research output: Contribution to journalArticle

Tantalum
Vanadium
laser welding
Laser beam welding
Stainless Steel
40 Citations (Scopus)

Heat transfer and fluid flow in additive manufacturing

Raghavan, A., Wei, H. L., Palmer, T. & Debroy, T., Nov 1 2013, In : Journal of Laser Applications. 25, 5, 052006.

Research output: Contribution to journalArticle

3D printers
surface geometry
fluid flow
laser welding
Flow of fluids

High power laser characterization using beam diagnostics

Blecher, J. J., Palmer, T. & Kelly, S. M., 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 55-59 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High power lasers
Lasers
Optics
Wave propagation
Laser beams
8 Citations (Scopus)

Identifying performance differences in transmissive and reflective laser optics using beam diagnostic tools

Blecher, J., Palmer, T. A., Kelly, S. M. & Martukanitz, R. P., Jul 1 2012, In : Welding Journal. 91, 7, p. 204S-214S

Research output: Contribution to journalArticle

Laser optics
Optics
High power lasers
Fiber lasers
Welds
2 Citations (Scopus)

Impact of chemical composition on precipitate morphology in an additively manufactured nickel base superalloy

Zuback, J. S., Moradifar, P., Khayat, Z., Alem, N. & Palmer, T., Aug 25 2019, In : Journal of Alloys and Compounds. 798, p. 446-457 12 p.

Research output: Contribution to journalArticle

Titanium
Nickel
Superalloys
Precipitates
Iron
6 Citations (Scopus)

Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel

Meredith, S. D., Zuback, J. S., Keist, J. S. & Palmer, T., Dec 19 2018, In : Materials Science and Engineering A. 738, p. 44-56 13 p.

Research output: Contribution to journalArticle

Stainless Steel
stainless steels
grade
heat treatment
Nitrogen
8 Citations (Scopus)
dwell
nickel alloys
Nickel alloys
titanium alloys
Titanium alloys
5 Citations (Scopus)
Nickel
Precipitates
Solid solutions
solid solutions
Iron