A miniaturized metal tube ultrasonic motor, the dimensions of which are 1. 6 mm in diameter and 6 mm in length, was developed. Two flattened surfaces with 90-degrees were ground on the outer surface of the stator. Two PZT-based piezoelectric ceramics were bonded onto these flat surfaces. The asymmetrical surface of the stator developed the split of the two degenerated orthogonal bending modes, resulting in a wobble motion. The working frequency of the 1. 6-mm motor with 6 mm in length was 130 kHz. A torque of 0.5 mNm was reached at a maximum power of 45 mW with a speed of 45 rad/sec. The maximum efficiency was 16%.
|Original language||English (US)|
|Number of pages||5|
|Journal||IEEE transactions on ultrasonics, ferroelectrics, and frequency control|
|State||Published - Jul 1 2003|
All Science Journal Classification (ASJC) codes
- Acoustics and Ultrasonics
- Electrical and Electronic Engineering