A Continuous Multi-material Toolpath Planning for Tissue Scaffolds with Hollowed Features

Ibrahim T. Ozbolat, Bahattin Koc

Research output: Contribution to journalArticle

Abstract

This paper presents a new multi-material based toolpath planning methodology for porous tissue scaffolds with multiple hollowed features. Ruled surface with hollowed features generated in our earlier work is used to develop toolpath planning. Ruling lines are reoriented to enable continuous and uniform size multi-material printing through them in two steps. Firstly, all ruling lines are matched and connected to eliminate start and stops during printing. Then, regions with high number of ruling lines are relaxed using a relaxation technique to eliminate over deposition. A novel layer-by-layer deposition process is progressed in two consecutive layers: The first layer with hollow shape based zigzag pattern and the next layer with spiral pattern deposition. Heterogeneous material properties are mapped based on the parametric distances from the hollow features.

Original languageEnglish (US)
Pages (from-to)889-899
Number of pages11
JournalComputer-Aided Design and Applications
Volume8
Issue number6
DOIs
StatePublished - Jan 1 2011

Fingerprint

Tool Path
Scaffold
Planning
Printing
Line
Eliminate
Materials properties
Heterogeneous Materials
Ruled Surface
Zigzag
Material Properties
Consecutive
Tissue Scaffolds
Methodology

All Science Journal Classification (ASJC) codes

  • Computational Mechanics
  • Computer Graphics and Computer-Aided Design
  • Computational Mathematics

Cite this

@article{bb31ef67d36d4f4aac5bcc62f50b3505,
title = "A Continuous Multi-material Toolpath Planning for Tissue Scaffolds with Hollowed Features",
abstract = "This paper presents a new multi-material based toolpath planning methodology for porous tissue scaffolds with multiple hollowed features. Ruled surface with hollowed features generated in our earlier work is used to develop toolpath planning. Ruling lines are reoriented to enable continuous and uniform size multi-material printing through them in two steps. Firstly, all ruling lines are matched and connected to eliminate start and stops during printing. Then, regions with high number of ruling lines are relaxed using a relaxation technique to eliminate over deposition. A novel layer-by-layer deposition process is progressed in two consecutive layers: The first layer with hollow shape based zigzag pattern and the next layer with spiral pattern deposition. Heterogeneous material properties are mapped based on the parametric distances from the hollow features.",
author = "Ozbolat, {Ibrahim T.} and Bahattin Koc",
year = "2011",
month = "1",
day = "1",
doi = "10.3722/cadaps.2011.889-899",
language = "English (US)",
volume = "8",
pages = "889--899",
journal = "Computer-Aided Design and Applications",
issn = "1686-4360",
publisher = "CAD Solutions",
number = "6",

}

A Continuous Multi-material Toolpath Planning for Tissue Scaffolds with Hollowed Features. / Ozbolat, Ibrahim T.; Koc, Bahattin.

In: Computer-Aided Design and Applications, Vol. 8, No. 6, 01.01.2011, p. 889-899.

Research output: Contribution to journalArticle

TY - JOUR

T1 - A Continuous Multi-material Toolpath Planning for Tissue Scaffolds with Hollowed Features

AU - Ozbolat, Ibrahim T.

AU - Koc, Bahattin

PY - 2011/1/1

Y1 - 2011/1/1

N2 - This paper presents a new multi-material based toolpath planning methodology for porous tissue scaffolds with multiple hollowed features. Ruled surface with hollowed features generated in our earlier work is used to develop toolpath planning. Ruling lines are reoriented to enable continuous and uniform size multi-material printing through them in two steps. Firstly, all ruling lines are matched and connected to eliminate start and stops during printing. Then, regions with high number of ruling lines are relaxed using a relaxation technique to eliminate over deposition. A novel layer-by-layer deposition process is progressed in two consecutive layers: The first layer with hollow shape based zigzag pattern and the next layer with spiral pattern deposition. Heterogeneous material properties are mapped based on the parametric distances from the hollow features.

AB - This paper presents a new multi-material based toolpath planning methodology for porous tissue scaffolds with multiple hollowed features. Ruled surface with hollowed features generated in our earlier work is used to develop toolpath planning. Ruling lines are reoriented to enable continuous and uniform size multi-material printing through them in two steps. Firstly, all ruling lines are matched and connected to eliminate start and stops during printing. Then, regions with high number of ruling lines are relaxed using a relaxation technique to eliminate over deposition. A novel layer-by-layer deposition process is progressed in two consecutive layers: The first layer with hollow shape based zigzag pattern and the next layer with spiral pattern deposition. Heterogeneous material properties are mapped based on the parametric distances from the hollow features.

UR - http://www.scopus.com/inward/record.url?scp=82755195820&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=82755195820&partnerID=8YFLogxK

U2 - 10.3722/cadaps.2011.889-899

DO - 10.3722/cadaps.2011.889-899

M3 - Article

AN - SCOPUS:82755195820

VL - 8

SP - 889

EP - 899

JO - Computer-Aided Design and Applications

JF - Computer-Aided Design and Applications

SN - 1686-4360

IS - 6

ER -