A method of calibrating a harbor for focusing low frequency sound

Andrew T. Kankey, Gary H. Koopmann, Kyle M. Becker, David Bradley

Research output: Contribution to journalArticle

Abstract

The objective of this work was to explore alternative methods to time-delay beamforming for focusing a sound field in a shallow water harbor environment. The approach is based on optimizing the phase of individual sources in an array to provide maximum sound pressure levels at a particular location in the harbor. The optimization scheme requires a priori interrogation of the harbor with a number of hydrophones in the area of interest. However, it is designed to be insensitive to vertical or horizontal boundaries and other time-independent obstructions that can be found in typical working harbors. Numerical simulations for classic array theory and the new Optimal Phase Search (OPS) method are compared and experimental data for both methods is presented. The field work investigated the extent to which low-frequency acoustic energy could be focused in very shallow water and was carried out in a semi-protected harbor in June 2008. Sound pressure levels generated with the new optimal phasing scheme were comparable with those based on classic array theory for the experiments, but the OPS method gave an increase in the SPL relative to the array method off-axis in the numerical simulations.

Original languageEnglish (US)
Pages (from-to)258-267
Number of pages10
JournalNoise Control Engineering Journal
Volume59
Issue number3
DOIs
StatePublished - May 1 2011

Fingerprint

harbors
calibrating
Ports and harbors
Acoustic waves
low frequencies
acoustics
shallow water
sound pressure
Pressure
Hydrophones
Water
hydrophones
interrogation
Computer simulation
beamforming
Acoustic fields
sound fields
Beamforming
Acoustics
Time delay

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering
  • Aerospace Engineering
  • Automotive Engineering
  • Public Health, Environmental and Occupational Health
  • Acoustics and Ultrasonics
  • Building and Construction
  • Mechanical Engineering

Cite this

Kankey, A. T., Koopmann, G. H., Becker, K. M., & Bradley, D. (2011). A method of calibrating a harbor for focusing low frequency sound. Noise Control Engineering Journal, 59(3), 258-267. https://doi.org/10.3397/1.3573568
Kankey, Andrew T. ; Koopmann, Gary H. ; Becker, Kyle M. ; Bradley, David. / A method of calibrating a harbor for focusing low frequency sound. In: Noise Control Engineering Journal. 2011 ; Vol. 59, No. 3. pp. 258-267.
@article{2db05a6a89394e36b235197be374bda9,
title = "A method of calibrating a harbor for focusing low frequency sound",
abstract = "The objective of this work was to explore alternative methods to time-delay beamforming for focusing a sound field in a shallow water harbor environment. The approach is based on optimizing the phase of individual sources in an array to provide maximum sound pressure levels at a particular location in the harbor. The optimization scheme requires a priori interrogation of the harbor with a number of hydrophones in the area of interest. However, it is designed to be insensitive to vertical or horizontal boundaries and other time-independent obstructions that can be found in typical working harbors. Numerical simulations for classic array theory and the new Optimal Phase Search (OPS) method are compared and experimental data for both methods is presented. The field work investigated the extent to which low-frequency acoustic energy could be focused in very shallow water and was carried out in a semi-protected harbor in June 2008. Sound pressure levels generated with the new optimal phasing scheme were comparable with those based on classic array theory for the experiments, but the OPS method gave an increase in the SPL relative to the array method off-axis in the numerical simulations.",
author = "Kankey, {Andrew T.} and Koopmann, {Gary H.} and Becker, {Kyle M.} and David Bradley",
year = "2011",
month = "5",
day = "1",
doi = "10.3397/1.3573568",
language = "English (US)",
volume = "59",
pages = "258--267",
journal = "Noise Control Engineering Journal",
issn = "0736-2501",
publisher = "Institute of Noise Control Engineering",
number = "3",

}

Kankey, AT, Koopmann, GH, Becker, KM & Bradley, D 2011, 'A method of calibrating a harbor for focusing low frequency sound', Noise Control Engineering Journal, vol. 59, no. 3, pp. 258-267. https://doi.org/10.3397/1.3573568

A method of calibrating a harbor for focusing low frequency sound. / Kankey, Andrew T.; Koopmann, Gary H.; Becker, Kyle M.; Bradley, David.

In: Noise Control Engineering Journal, Vol. 59, No. 3, 01.05.2011, p. 258-267.

Research output: Contribution to journalArticle

TY - JOUR

T1 - A method of calibrating a harbor for focusing low frequency sound

AU - Kankey, Andrew T.

AU - Koopmann, Gary H.

AU - Becker, Kyle M.

AU - Bradley, David

PY - 2011/5/1

Y1 - 2011/5/1

N2 - The objective of this work was to explore alternative methods to time-delay beamforming for focusing a sound field in a shallow water harbor environment. The approach is based on optimizing the phase of individual sources in an array to provide maximum sound pressure levels at a particular location in the harbor. The optimization scheme requires a priori interrogation of the harbor with a number of hydrophones in the area of interest. However, it is designed to be insensitive to vertical or horizontal boundaries and other time-independent obstructions that can be found in typical working harbors. Numerical simulations for classic array theory and the new Optimal Phase Search (OPS) method are compared and experimental data for both methods is presented. The field work investigated the extent to which low-frequency acoustic energy could be focused in very shallow water and was carried out in a semi-protected harbor in June 2008. Sound pressure levels generated with the new optimal phasing scheme were comparable with those based on classic array theory for the experiments, but the OPS method gave an increase in the SPL relative to the array method off-axis in the numerical simulations.

AB - The objective of this work was to explore alternative methods to time-delay beamforming for focusing a sound field in a shallow water harbor environment. The approach is based on optimizing the phase of individual sources in an array to provide maximum sound pressure levels at a particular location in the harbor. The optimization scheme requires a priori interrogation of the harbor with a number of hydrophones in the area of interest. However, it is designed to be insensitive to vertical or horizontal boundaries and other time-independent obstructions that can be found in typical working harbors. Numerical simulations for classic array theory and the new Optimal Phase Search (OPS) method are compared and experimental data for both methods is presented. The field work investigated the extent to which low-frequency acoustic energy could be focused in very shallow water and was carried out in a semi-protected harbor in June 2008. Sound pressure levels generated with the new optimal phasing scheme were comparable with those based on classic array theory for the experiments, but the OPS method gave an increase in the SPL relative to the array method off-axis in the numerical simulations.

UR - http://www.scopus.com/inward/record.url?scp=79957441815&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79957441815&partnerID=8YFLogxK

U2 - 10.3397/1.3573568

DO - 10.3397/1.3573568

M3 - Article

VL - 59

SP - 258

EP - 267

JO - Noise Control Engineering Journal

JF - Noise Control Engineering Journal

SN - 0736-2501

IS - 3

ER -