A microcube-based hybrid piezocomposite as a flexible energy generator

Yong Zhang, Wanlin Zhu, Chang Kyu Jeong, Huajun Sun, Guang Yang, Wen Chen, Qing Wang

Research output: Contribution to journalArticlepeer-review

42 Scopus citations

Abstract

Harvesting energy from surrounding mechanical sources to power low-power portable electronics has attracted worldwide attention during the last decade. Herein, we present a high-performance piezoelectric energy generator (PEG) based on lead zirconate titanate (PbZr0.52Ti0.48O3, PZT) microcubes and poly(vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFE)). The PZT microcubes with tetragonal perovskite phase were prepared by one-step hydrothermal method. It is demonstrated that cube-shaped piezoelectric particles are advantageous over traditional spherical particles because external force can be readily concentrated on the edges of cubes to generate higher piezoelectric potential. Moreover, different from most of the previous flexible piezoelectric generators, the utilization of high elastic modulus, piezoelectric-active matrix P(VDF-TrFE) in our piezocomposites benefits power generations. The composite with a metal-insulator-metal (MIM) structure produces an open-circuit voltage up to ∼16 V under bending motions. A maximum instantaneous power density of ∼50 μW cm-3 has been obtained at a load resistance of 160 MΩ. This work provides a facile approach to enhanced piezoelectric response in flexible composites via tailoring the geometry of ceramic fillers.

Original languageEnglish (US)
Pages (from-to)32502-32507
Number of pages6
JournalRSC Advances
Volume7
Issue number52
DOIs
StatePublished - 2017

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'A microcube-based hybrid piezocomposite as a flexible energy generator'. Together they form a unique fingerprint.

Cite this