A new single-sided blind riveting method for joining dissimilar materials

Junying Min, Yongqiang Li, Blair E. Carlson, S. Jack Hu, Jingjing Li, Jianping Lin

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

A new single-sided, one-step, blind riveting method is developed for joining dissimilar materials. The rivet rotates at a high speed when it cuts and penetrates the workpieces. When fabricating lap joints of AA6111 and AA6022, it was observed that both the torque and force increased as feed rate increased during the rivet penetration. Joints produced by the new method exhibited approximately a 20% higher maximum tensile load compared to joints made by conventional blind riveting and a 11% higher maximum tensile load compared to joints made with friction stir blind riveting (FSBR). The new riveting process is compared to the FSBR due to their process similarity and the mechanism for the success of the new method is discussed.

Original languageEnglish (US)
Pages (from-to)13-16
Number of pages4
JournalCIRP Annals - Manufacturing Technology
Volume64
Issue number1
DOIs
StatePublished - Jan 1 2015

Fingerprint

Riveting
Dissimilar materials
Joining
Rivets
Friction
Torque

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

Min, Junying ; Li, Yongqiang ; Carlson, Blair E. ; Hu, S. Jack ; Li, Jingjing ; Lin, Jianping. / A new single-sided blind riveting method for joining dissimilar materials. In: CIRP Annals - Manufacturing Technology. 2015 ; Vol. 64, No. 1. pp. 13-16.
@article{be736b9e35724d65964971fe977ec35a,
title = "A new single-sided blind riveting method for joining dissimilar materials",
abstract = "A new single-sided, one-step, blind riveting method is developed for joining dissimilar materials. The rivet rotates at a high speed when it cuts and penetrates the workpieces. When fabricating lap joints of AA6111 and AA6022, it was observed that both the torque and force increased as feed rate increased during the rivet penetration. Joints produced by the new method exhibited approximately a 20{\%} higher maximum tensile load compared to joints made by conventional blind riveting and a 11{\%} higher maximum tensile load compared to joints made with friction stir blind riveting (FSBR). The new riveting process is compared to the FSBR due to their process similarity and the mechanism for the success of the new method is discussed.",
author = "Junying Min and Yongqiang Li and Carlson, {Blair E.} and Hu, {S. Jack} and Jingjing Li and Jianping Lin",
year = "2015",
month = "1",
day = "1",
doi = "10.1016/j.cirp.2015.04.047",
language = "English (US)",
volume = "64",
pages = "13--16",
journal = "CIRP Annals - Manufacturing Technology",
issn = "0007-8506",
publisher = "Elsevier USA",
number = "1",

}

A new single-sided blind riveting method for joining dissimilar materials. / Min, Junying; Li, Yongqiang; Carlson, Blair E.; Hu, S. Jack; Li, Jingjing; Lin, Jianping.

In: CIRP Annals - Manufacturing Technology, Vol. 64, No. 1, 01.01.2015, p. 13-16.

Research output: Contribution to journalArticle

TY - JOUR

T1 - A new single-sided blind riveting method for joining dissimilar materials

AU - Min, Junying

AU - Li, Yongqiang

AU - Carlson, Blair E.

AU - Hu, S. Jack

AU - Li, Jingjing

AU - Lin, Jianping

PY - 2015/1/1

Y1 - 2015/1/1

N2 - A new single-sided, one-step, blind riveting method is developed for joining dissimilar materials. The rivet rotates at a high speed when it cuts and penetrates the workpieces. When fabricating lap joints of AA6111 and AA6022, it was observed that both the torque and force increased as feed rate increased during the rivet penetration. Joints produced by the new method exhibited approximately a 20% higher maximum tensile load compared to joints made by conventional blind riveting and a 11% higher maximum tensile load compared to joints made with friction stir blind riveting (FSBR). The new riveting process is compared to the FSBR due to their process similarity and the mechanism for the success of the new method is discussed.

AB - A new single-sided, one-step, blind riveting method is developed for joining dissimilar materials. The rivet rotates at a high speed when it cuts and penetrates the workpieces. When fabricating lap joints of AA6111 and AA6022, it was observed that both the torque and force increased as feed rate increased during the rivet penetration. Joints produced by the new method exhibited approximately a 20% higher maximum tensile load compared to joints made by conventional blind riveting and a 11% higher maximum tensile load compared to joints made with friction stir blind riveting (FSBR). The new riveting process is compared to the FSBR due to their process similarity and the mechanism for the success of the new method is discussed.

UR - http://www.scopus.com/inward/record.url?scp=84933678083&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84933678083&partnerID=8YFLogxK

U2 - 10.1016/j.cirp.2015.04.047

DO - 10.1016/j.cirp.2015.04.047

M3 - Article

VL - 64

SP - 13

EP - 16

JO - CIRP Annals - Manufacturing Technology

JF - CIRP Annals - Manufacturing Technology

SN - 0007-8506

IS - 1

ER -