A new torsional actuator based on shear piezoelectric response

A. E. Glazounov, Q. M. Zhang, C. Kim

    Research output: Contribution to journalConference articlepeer-review

    12 Scopus citations

    Abstract

    A torsional actuator generating angular displacement from the piezoelectric shear strain was developed. The actuator is a tube consisting of an even number of the segments poled along the length, which are adhesively bonded together, and the joints act as electrodes to apply the driving voltage. The experimental data measured on the prototype actuator: (i) prove the proposed concept of the torsional actuator, (ii) show that the actuator functions well under the torque load, and (iii) demonstrate that it has superior characteristics compared to previously reported designs of torsional actuators. In addition, one of the obvious advantages of the present design of the actuator is its simplicity: the piezoelectric shear strain is transformed directly into the angular displacement, whereas in the previously reported actuators, the conversion mechanism into the torsional motion was rather complicated which thus required a sophisticated design of the whole system.

    Original languageEnglish (US)
    Pages (from-to)82-91
    Number of pages10
    JournalProceedings of SPIE - The International Society for Optical Engineering
    Volume3324
    DOIs
    StatePublished - Dec 1 1998
    EventSmart Structures and Materials 1998 SMart Materials Technologies - San Diego, CA, United States
    Duration: Mar 4 1998Mar 5 1998

    All Science Journal Classification (ASJC) codes

    • Electronic, Optical and Magnetic Materials
    • Condensed Matter Physics
    • Computer Science Applications
    • Applied Mathematics
    • Electrical and Electronic Engineering

    Fingerprint Dive into the research topics of 'A new torsional actuator based on shear piezoelectric response'. Together they form a unique fingerprint.

    Cite this