A nonlinear transmission that increases piezo-stack work output

George A. Lesieutre, J. Y. Loverich, G. H. Koopmann, Eric M. Mockensturm

Research output: Contribution to journalConference article

Abstract

A non-linear motion transmission mechanism for improving the mechanical work output of an active material drive element is presented. This improvement is achieved by addressing the typical mismatch between the characteristics of a driven load, such as a constant force or spring load, and the active material's force-displacement behavior; this behavior is described, at a constant drive level, by a linear decrease in the possible force with increasing displacement. The motion transmission mechanism consists of a simple linkage that couples the active material to the load. As the active material does work on the load, the linkage changes the mechanical advantage or leverage of the active material with respect to the load, thereby tailoring the load to best exploit the active material's force-displacement behavior. A kinematic model is used to predict the maximum quasi-static mechanical work output that can be obtained. Optimization of the model geometry results in a transmission with a theoretical work enhancement of 36.9% for a constant load and a theoretical work enhancement that approaches 100% for a spring load. The possibility of work enhancement is verified in an experiment that demonstrates a work output improvement of 27.1% for the constant load case.

Original languageEnglish (US)
Pages (from-to)2152-2162
Number of pages11
JournalCollection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
Volume3
StatePublished - Aug 28 2003
Event44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - Norfolk, VA, United States
Duration: Apr 7 2003Apr 10 2003

Fingerprint

Kinematics
Geometry
Experiments

All Science Journal Classification (ASJC) codes

  • Architecture
  • Materials Science(all)
  • Aerospace Engineering
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

@article{f780a2d1029041c1b10e3a3f5cd0d337,
title = "A nonlinear transmission that increases piezo-stack work output",
abstract = "A non-linear motion transmission mechanism for improving the mechanical work output of an active material drive element is presented. This improvement is achieved by addressing the typical mismatch between the characteristics of a driven load, such as a constant force or spring load, and the active material's force-displacement behavior; this behavior is described, at a constant drive level, by a linear decrease in the possible force with increasing displacement. The motion transmission mechanism consists of a simple linkage that couples the active material to the load. As the active material does work on the load, the linkage changes the mechanical advantage or leverage of the active material with respect to the load, thereby tailoring the load to best exploit the active material's force-displacement behavior. A kinematic model is used to predict the maximum quasi-static mechanical work output that can be obtained. Optimization of the model geometry results in a transmission with a theoretical work enhancement of 36.9{\%} for a constant load and a theoretical work enhancement that approaches 100{\%} for a spring load. The possibility of work enhancement is verified in an experiment that demonstrates a work output improvement of 27.1{\%} for the constant load case.",
author = "Lesieutre, {George A.} and Loverich, {J. Y.} and Koopmann, {G. H.} and Mockensturm, {Eric M.}",
year = "2003",
month = "8",
day = "28",
language = "English (US)",
volume = "3",
pages = "2152--2162",
journal = "Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference",
issn = "0273-4508",
publisher = "American Institute of Aeronautics and Astronautics Inc. (AIAA)",

}

A nonlinear transmission that increases piezo-stack work output. / Lesieutre, George A.; Loverich, J. Y.; Koopmann, G. H.; Mockensturm, Eric M.

In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Vol. 3, 28.08.2003, p. 2152-2162.

Research output: Contribution to journalConference article

TY - JOUR

T1 - A nonlinear transmission that increases piezo-stack work output

AU - Lesieutre, George A.

AU - Loverich, J. Y.

AU - Koopmann, G. H.

AU - Mockensturm, Eric M.

PY - 2003/8/28

Y1 - 2003/8/28

N2 - A non-linear motion transmission mechanism for improving the mechanical work output of an active material drive element is presented. This improvement is achieved by addressing the typical mismatch between the characteristics of a driven load, such as a constant force or spring load, and the active material's force-displacement behavior; this behavior is described, at a constant drive level, by a linear decrease in the possible force with increasing displacement. The motion transmission mechanism consists of a simple linkage that couples the active material to the load. As the active material does work on the load, the linkage changes the mechanical advantage or leverage of the active material with respect to the load, thereby tailoring the load to best exploit the active material's force-displacement behavior. A kinematic model is used to predict the maximum quasi-static mechanical work output that can be obtained. Optimization of the model geometry results in a transmission with a theoretical work enhancement of 36.9% for a constant load and a theoretical work enhancement that approaches 100% for a spring load. The possibility of work enhancement is verified in an experiment that demonstrates a work output improvement of 27.1% for the constant load case.

AB - A non-linear motion transmission mechanism for improving the mechanical work output of an active material drive element is presented. This improvement is achieved by addressing the typical mismatch between the characteristics of a driven load, such as a constant force or spring load, and the active material's force-displacement behavior; this behavior is described, at a constant drive level, by a linear decrease in the possible force with increasing displacement. The motion transmission mechanism consists of a simple linkage that couples the active material to the load. As the active material does work on the load, the linkage changes the mechanical advantage or leverage of the active material with respect to the load, thereby tailoring the load to best exploit the active material's force-displacement behavior. A kinematic model is used to predict the maximum quasi-static mechanical work output that can be obtained. Optimization of the model geometry results in a transmission with a theoretical work enhancement of 36.9% for a constant load and a theoretical work enhancement that approaches 100% for a spring load. The possibility of work enhancement is verified in an experiment that demonstrates a work output improvement of 27.1% for the constant load case.

UR - http://www.scopus.com/inward/record.url?scp=0042011398&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0042011398&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0042011398

VL - 3

SP - 2152

EP - 2162

JO - Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

JF - Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

SN - 0273-4508

ER -