A numerical investigation of supersonic nozzle boundary layer transition

Laura Pauley, Samir N. Dagher

Research output: Contribution to conferencePaper

Abstract

It has been found in previous studies that the wall heat flux measured experimentally in the NASA Lewis high-area-ratio nozzle was not always predicted by laminar or turbulent boundary layer computations. These results suggest that the boundary layer undergoes transition. In the present paper, the eN method was used to predict which operating conditions produce boundary layer transition In the nozzle. If transition was predicted, the stability analysis provided the location of transition onset as well as the structure and wavelength of the dominant instability. Tollmien-Schlichtingwaves and Taylor-Görtler vortices were considered as possible disturbance structures which trigger transition. When the chamber pressure was 360 psia, the stability analysis indicated that transition does not occur in the nozzle. The analysis correctly determined that a laminar boundary layer computation accurately predicts the experimental wall heat flux. For chamber pressure of 656 psia and above, it was found that Taylor-Gortler vortices produced transition in the nozzle. At these conditions, the laminar boundary layer computation did not accurately predict the wall heat flux. The stability analysis can be used to establish the nozzle conditions which will be accurately predicted by a laminar boundary layer computation.

Original languageEnglish (US)
StatePublished - Jan 1 1991
EventAIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991 - Cleveland, United States
Duration: Sep 4 1991Sep 6 1991

Other

OtherAIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991
CountryUnited States
CityCleveland
Period9/4/919/6/91

Fingerprint

Nozzles
Boundary layers
Laminar boundary layer
Heat flux
Vortex flow
NASA
Wavelength

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Pauley, L., & Dagher, S. N. (1991). A numerical investigation of supersonic nozzle boundary layer transition. Paper presented at AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991, Cleveland, United States.
Pauley, Laura ; Dagher, Samir N. / A numerical investigation of supersonic nozzle boundary layer transition. Paper presented at AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991, Cleveland, United States.
@conference{f5bfb718ba8142d592319965aa47b707,
title = "A numerical investigation of supersonic nozzle boundary layer transition",
abstract = "It has been found in previous studies that the wall heat flux measured experimentally in the NASA Lewis high-area-ratio nozzle was not always predicted by laminar or turbulent boundary layer computations. These results suggest that the boundary layer undergoes transition. In the present paper, the eN method was used to predict which operating conditions produce boundary layer transition In the nozzle. If transition was predicted, the stability analysis provided the location of transition onset as well as the structure and wavelength of the dominant instability. Tollmien-Schlichtingwaves and Taylor-G{\"o}rtler vortices were considered as possible disturbance structures which trigger transition. When the chamber pressure was 360 psia, the stability analysis indicated that transition does not occur in the nozzle. The analysis correctly determined that a laminar boundary layer computation accurately predicts the experimental wall heat flux. For chamber pressure of 656 psia and above, it was found that Taylor-Gortler vortices produced transition in the nozzle. At these conditions, the laminar boundary layer computation did not accurately predict the wall heat flux. The stability analysis can be used to establish the nozzle conditions which will be accurately predicted by a laminar boundary layer computation.",
author = "Laura Pauley and Dagher, {Samir N.}",
year = "1991",
month = "1",
day = "1",
language = "English (US)",
note = "AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991 ; Conference date: 04-09-1991 Through 06-09-1991",

}

Pauley, L & Dagher, SN 1991, 'A numerical investigation of supersonic nozzle boundary layer transition' Paper presented at AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991, Cleveland, United States, 9/4/91 - 9/6/91, .

A numerical investigation of supersonic nozzle boundary layer transition. / Pauley, Laura; Dagher, Samir N.

1991. Paper presented at AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991, Cleveland, United States.

Research output: Contribution to conferencePaper

TY - CONF

T1 - A numerical investigation of supersonic nozzle boundary layer transition

AU - Pauley, Laura

AU - Dagher, Samir N.

PY - 1991/1/1

Y1 - 1991/1/1

N2 - It has been found in previous studies that the wall heat flux measured experimentally in the NASA Lewis high-area-ratio nozzle was not always predicted by laminar or turbulent boundary layer computations. These results suggest that the boundary layer undergoes transition. In the present paper, the eN method was used to predict which operating conditions produce boundary layer transition In the nozzle. If transition was predicted, the stability analysis provided the location of transition onset as well as the structure and wavelength of the dominant instability. Tollmien-Schlichtingwaves and Taylor-Görtler vortices were considered as possible disturbance structures which trigger transition. When the chamber pressure was 360 psia, the stability analysis indicated that transition does not occur in the nozzle. The analysis correctly determined that a laminar boundary layer computation accurately predicts the experimental wall heat flux. For chamber pressure of 656 psia and above, it was found that Taylor-Gortler vortices produced transition in the nozzle. At these conditions, the laminar boundary layer computation did not accurately predict the wall heat flux. The stability analysis can be used to establish the nozzle conditions which will be accurately predicted by a laminar boundary layer computation.

AB - It has been found in previous studies that the wall heat flux measured experimentally in the NASA Lewis high-area-ratio nozzle was not always predicted by laminar or turbulent boundary layer computations. These results suggest that the boundary layer undergoes transition. In the present paper, the eN method was used to predict which operating conditions produce boundary layer transition In the nozzle. If transition was predicted, the stability analysis provided the location of transition onset as well as the structure and wavelength of the dominant instability. Tollmien-Schlichtingwaves and Taylor-Görtler vortices were considered as possible disturbance structures which trigger transition. When the chamber pressure was 360 psia, the stability analysis indicated that transition does not occur in the nozzle. The analysis correctly determined that a laminar boundary layer computation accurately predicts the experimental wall heat flux. For chamber pressure of 656 psia and above, it was found that Taylor-Gortler vortices produced transition in the nozzle. At these conditions, the laminar boundary layer computation did not accurately predict the wall heat flux. The stability analysis can be used to establish the nozzle conditions which will be accurately predicted by a laminar boundary layer computation.

UR - http://www.scopus.com/inward/record.url?scp=85007115654&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007115654&partnerID=8YFLogxK

M3 - Paper

ER -

Pauley L, Dagher SN. A numerical investigation of supersonic nozzle boundary layer transition. 1991. Paper presented at AIAA/NASA/OAI Conference on Advanced SEI Technologies, 1991, Cleveland, United States.