A screening model for CO2 flooding and storage in Gulf Coast reservoirs based on dimensionless groups

D. J. Wood, L. W. Lake, R. T. Johns, V. Nunez

Research output: Contribution to conferencePaper

5 Scopus citations

Abstract

Concerns over global warming have led to interest in removing greenhouse gases, specifically CO2, from the atmosphere. Sequestration of CO2 in oil reservoirs as part of enhanced oil recovery (EOR) projects is one method being considered. This paper first presents the scaling groups necessary to describe CO2 flooding for a typical line-drive pattern, and then uses these groups in a Box-Behnken experimental design to create a screening model most applicable to candidate Gulf Coast reservoirs. By generating oil recovery and CO2 storage curves, the model estimates the cumulative oil recovery and CO2 storage potential for a given reservoir. Past screening models - Rivas et al.1 and Diaz et al. 2 - focused only on oil recovery and simply assigned qualitative rankings to reservoirs. Models that did include quantitative results, including CO2 Prophet3 and the CO2 Predictive Model 4, did not include the effects of dip. This model focuses on both oil recovery and CO2 storage potential, produces quantitative results for each, and includes the effects of dip. This model quickly estimates the oil recovery and CO2 storage potential for a reservoir. Operators alike can quickly screen large databases of reservoirs to identify the best candidates for CO2 flooding and storage. The scaling groups also provide the basis for future models that may be more specific to other regions. The results show that continuous CO2 flooding can be fully described using ten dimensionless groups - aspect ratio, dip angle group, water and CO2 mobility ratios, buoyancy number, dimensionless injection and producing pressures, residual oil saturation to water and gas, and initial oil saturation. The effects of capillary forces and dispersion were secondary effects in this model and were not included in the scaling, Dimensionless oil recovery was effectively modeled with the dimensionless oil breakthrough time and the dimensionless recovery at three different dimensionless times, while CO 2 storage potential was calculated only at the final dimensionless time. The reservoir-specific parameters discussed above were calculated from response surface fits. The scaling does not work as well at small buoyancy numbers; however, it is effective in the range of values typical of Gulf Coast reservoirs

Original languageEnglish (US)
Pages941-948
Number of pages8
DOIs
StatePublished - Jan 1 2006
Event15th SPE-DOE Improved Oil Recovery Symposium: Old Reservoirs New Tricks A Global Perspective - Tulsa, OK, United States
Duration: Apr 22 2006Apr 26 2006

Other

Other15th SPE-DOE Improved Oil Recovery Symposium: Old Reservoirs New Tricks A Global Perspective
CountryUnited States
CityTulsa, OK
Period4/22/064/26/06

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Geotechnical Engineering and Engineering Geology

Fingerprint Dive into the research topics of 'A screening model for CO<sub>2</sub> flooding and storage in Gulf Coast reservoirs based on dimensionless groups'. Together they form a unique fingerprint.

  • Cite this

    Wood, D. J., Lake, L. W., Johns, R. T., & Nunez, V. (2006). A screening model for CO2 flooding and storage in Gulf Coast reservoirs based on dimensionless groups. 941-948. Paper presented at 15th SPE-DOE Improved Oil Recovery Symposium: Old Reservoirs New Tricks A Global Perspective, Tulsa, OK, United States. https://doi.org/10.2523/100021-ms