A simulation of synchronous manufacturing at a naval aviation depot

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The planning, scheduling and control of repair/remanufacture (REMAN) operations has received considerable attention among practitioners over the past few years, but little attention from academia. The premise of this research is that significant improvements can be made in the planning, scheduling and controlling of REMAN operations by the application of the principles of synchronous manufacturing developed from the Theory of Constraints (TOC). Normally scheduling requires standards relating to part routings and processing times. These standards are not available in remanufacturing due to the stochastic nature of the amount of work and the routings required to rebuild a unit. TOC avoids this problem of standards by (1) identifying the constraint and (2) the use of Buffers and Buffer Management. This approach makes the use of approximations to standards acceptable. The implementation of synchronous manufacturing involves the modification of performance measures and adoption of drum-buffer-rope (DBR) as a planning, scheduling and control system. Synchronous manufacturing does not require the expense of purchasing or developing in-house MRP software, nor does it require the high degree of data accuracy at all points. A model showing if significant improvement could be achieved by a REMAN firm adopting the principles of synchronous manufacturing would be of benefit to practitioners and academics.

Original languageEnglish (US)
Title of host publicationProceedings of the 25th Conference on Winter Simulation, WSC 1993
EditorsWilliam E. Biles, Gerald W. Evans, Edward C. Russell, Mansooreh Mollaghasemi
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages908-915
Number of pages8
ISBN (Electronic)078031381X
DOIs
StatePublished - Dec 1 1993
Event25th Conference on Winter Simulation, WSC 1993 - Los Angeles, United States
Duration: Dec 12 1993Dec 15 1993

Publication series

NameProceedings - Winter Simulation Conference
VolumePart F129590
ISSN (Print)0891-7736

Other

Other25th Conference on Winter Simulation, WSC 1993
CountryUnited States
CityLos Angeles
Period12/12/9312/15/93

Fingerprint

Aviation
Planning and Scheduling
Manufacturing
Scheduling
Planning
Buffer
Simulation
Routing
Remanufacturing
Buffer Management
Purchasing
Performance Measures
Repair
Control System
Control systems
Unit
Software
Standards
Approximation
Processing

All Science Journal Classification (ASJC) codes

  • Software
  • Modeling and Simulation
  • Computer Science Applications

Cite this

Guide, V. D. R. (1993). A simulation of synchronous manufacturing at a naval aviation depot. In W. E. Biles, G. W. Evans, E. C. Russell, & M. Mollaghasemi (Eds.), Proceedings of the 25th Conference on Winter Simulation, WSC 1993 (pp. 908-915). (Proceedings - Winter Simulation Conference; Vol. Part F129590). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1145/256563.256878
Guide, V. Daniel R. / A simulation of synchronous manufacturing at a naval aviation depot. Proceedings of the 25th Conference on Winter Simulation, WSC 1993. editor / William E. Biles ; Gerald W. Evans ; Edward C. Russell ; Mansooreh Mollaghasemi. Institute of Electrical and Electronics Engineers Inc., 1993. pp. 908-915 (Proceedings - Winter Simulation Conference).
@inproceedings{6a38bdc5becb42b68cdbfbe8484d1d2b,
title = "A simulation of synchronous manufacturing at a naval aviation depot",
abstract = "The planning, scheduling and control of repair/remanufacture (REMAN) operations has received considerable attention among practitioners over the past few years, but little attention from academia. The premise of this research is that significant improvements can be made in the planning, scheduling and controlling of REMAN operations by the application of the principles of synchronous manufacturing developed from the Theory of Constraints (TOC). Normally scheduling requires standards relating to part routings and processing times. These standards are not available in remanufacturing due to the stochastic nature of the amount of work and the routings required to rebuild a unit. TOC avoids this problem of standards by (1) identifying the constraint and (2) the use of Buffers and Buffer Management. This approach makes the use of approximations to standards acceptable. The implementation of synchronous manufacturing involves the modification of performance measures and adoption of drum-buffer-rope (DBR) as a planning, scheduling and control system. Synchronous manufacturing does not require the expense of purchasing or developing in-house MRP software, nor does it require the high degree of data accuracy at all points. A model showing if significant improvement could be achieved by a REMAN firm adopting the principles of synchronous manufacturing would be of benefit to practitioners and academics.",
author = "Guide, {V. Daniel R.}",
year = "1993",
month = "12",
day = "1",
doi = "10.1145/256563.256878",
language = "English (US)",
series = "Proceedings - Winter Simulation Conference",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "908--915",
editor = "Biles, {William E.} and Evans, {Gerald W.} and Russell, {Edward C.} and Mansooreh Mollaghasemi",
booktitle = "Proceedings of the 25th Conference on Winter Simulation, WSC 1993",
address = "United States",

}

Guide, VDR 1993, A simulation of synchronous manufacturing at a naval aviation depot. in WE Biles, GW Evans, EC Russell & M Mollaghasemi (eds), Proceedings of the 25th Conference on Winter Simulation, WSC 1993. Proceedings - Winter Simulation Conference, vol. Part F129590, Institute of Electrical and Electronics Engineers Inc., pp. 908-915, 25th Conference on Winter Simulation, WSC 1993, Los Angeles, United States, 12/12/93. https://doi.org/10.1145/256563.256878

A simulation of synchronous manufacturing at a naval aviation depot. / Guide, V. Daniel R.

Proceedings of the 25th Conference on Winter Simulation, WSC 1993. ed. / William E. Biles; Gerald W. Evans; Edward C. Russell; Mansooreh Mollaghasemi. Institute of Electrical and Electronics Engineers Inc., 1993. p. 908-915 (Proceedings - Winter Simulation Conference; Vol. Part F129590).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - A simulation of synchronous manufacturing at a naval aviation depot

AU - Guide, V. Daniel R.

PY - 1993/12/1

Y1 - 1993/12/1

N2 - The planning, scheduling and control of repair/remanufacture (REMAN) operations has received considerable attention among practitioners over the past few years, but little attention from academia. The premise of this research is that significant improvements can be made in the planning, scheduling and controlling of REMAN operations by the application of the principles of synchronous manufacturing developed from the Theory of Constraints (TOC). Normally scheduling requires standards relating to part routings and processing times. These standards are not available in remanufacturing due to the stochastic nature of the amount of work and the routings required to rebuild a unit. TOC avoids this problem of standards by (1) identifying the constraint and (2) the use of Buffers and Buffer Management. This approach makes the use of approximations to standards acceptable. The implementation of synchronous manufacturing involves the modification of performance measures and adoption of drum-buffer-rope (DBR) as a planning, scheduling and control system. Synchronous manufacturing does not require the expense of purchasing or developing in-house MRP software, nor does it require the high degree of data accuracy at all points. A model showing if significant improvement could be achieved by a REMAN firm adopting the principles of synchronous manufacturing would be of benefit to practitioners and academics.

AB - The planning, scheduling and control of repair/remanufacture (REMAN) operations has received considerable attention among practitioners over the past few years, but little attention from academia. The premise of this research is that significant improvements can be made in the planning, scheduling and controlling of REMAN operations by the application of the principles of synchronous manufacturing developed from the Theory of Constraints (TOC). Normally scheduling requires standards relating to part routings and processing times. These standards are not available in remanufacturing due to the stochastic nature of the amount of work and the routings required to rebuild a unit. TOC avoids this problem of standards by (1) identifying the constraint and (2) the use of Buffers and Buffer Management. This approach makes the use of approximations to standards acceptable. The implementation of synchronous manufacturing involves the modification of performance measures and adoption of drum-buffer-rope (DBR) as a planning, scheduling and control system. Synchronous manufacturing does not require the expense of purchasing or developing in-house MRP software, nor does it require the high degree of data accuracy at all points. A model showing if significant improvement could be achieved by a REMAN firm adopting the principles of synchronous manufacturing would be of benefit to practitioners and academics.

UR - http://www.scopus.com/inward/record.url?scp=85031699835&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85031699835&partnerID=8YFLogxK

U2 - 10.1145/256563.256878

DO - 10.1145/256563.256878

M3 - Conference contribution

AN - SCOPUS:85031699835

T3 - Proceedings - Winter Simulation Conference

SP - 908

EP - 915

BT - Proceedings of the 25th Conference on Winter Simulation, WSC 1993

A2 - Biles, William E.

A2 - Evans, Gerald W.

A2 - Russell, Edward C.

A2 - Mollaghasemi, Mansooreh

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Guide VDR. A simulation of synchronous manufacturing at a naval aviation depot. In Biles WE, Evans GW, Russell EC, Mollaghasemi M, editors, Proceedings of the 25th Conference on Winter Simulation, WSC 1993. Institute of Electrical and Electronics Engineers Inc. 1993. p. 908-915. (Proceedings - Winter Simulation Conference). https://doi.org/10.1145/256563.256878